[lkml]   [2020]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v7 0/5] Add TI PRUSS Local Interrupt Controller IRQChip driver
Hi All,

The following is a v7 version of the series [1-6] that adds an IRQChip
driver for the local interrupt controller present within a Programmable
Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS) present on a
number of TI SoCs including OMAP architecture based AM335x, AM437x, AM57xx SoCs,
Keystone 2 architecture based 66AK2G SoCs, Davinci architecture based
OMAP-L138/DA850 SoCs and the latest K3 architecture based AM65x and J721E SoCs.
Please see the v1 cover-letter [1] for details about the features of this
interrupt controller. More details can be found in any of the supported SoC
TRMs. Eg: Chapter 30.1.6 of AM5728 TRM [7]

Please see the individual patches for exact changes in each patch, following are
the main changes from v5:
- Add Co-developed-by tags.
- Change the irq type to IRQ_TYPE_LEVEL_HIGH in patch #2.


Best regards

David Lechner (1):
irqchip/irq-pruss-intc: Implement irq_{get,set}_irqchip_state ops

Grzegorz Jaszczyk (1):
irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS

Suman Anna (3):
dt-bindings: irqchip: Add PRU-ICSS interrupt controller bindings
irqchip/irq-pruss-intc: Add logic for handling reserved interrupts
irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs

.../interrupt-controller/ti,pruss-intc.yaml | 158 +++++
drivers/irqchip/Kconfig | 10 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-pruss-intc.c | 664 +++++++++++++++++++++
4 files changed, 833 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
create mode 100644 drivers/irqchip/irq-pruss-intc.c


 \ /
  Last update: 2020-09-16 22:39    [W:0.056 / U:4.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site