lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/6] dma-mapping: introduce DMA range map, supplanting dma_pfn_offset
On Tue, Sep 15, 2020 at 07:41:22AM +0200, Christoph Hellwig wrote:
> On Mon, Sep 14, 2020 at 05:01:47PM -0600, Mathieu Poirier wrote:
>
> [700 lines of the fullquote deleted..]
>
> > > + for (r = map; r->size; r++)
> > > + num_ranges++;
> > > +
> > > + new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)),
> > > + GFP_KERNEL);
> > > + if (!new_map)
> > > + return -ENOMEM;
> > > + to->dma_range_map = new_map;
> > > + return 0;
> > > +}
> > > +
> >
> > This patch seemed Ok to me but it broke the stm32 remoteproc implementation. When
> > I tested things out function dma_coerce_mask_and_cohenrent() returns -5 and the
> > rest of the initialisation fails. I isolated things to function dma_to_pfn()
> > [2]. In the original implementation __bus_to_pfn() returns 0xfffff and
> > dev->dma_pfn_offset is equal to 0x38000. As such the function returns 0x137fff
> > and dma_supported() a non-zero value[3].
> >
> > With this set function dma_to_pfn() received a face lift. Function
> > __bus_to_pfn() still returns 0xfffff but translate_dma_to_phys() returns 0,
> > which forces dma_supported() to also return 0 and that is where the -5 (-EIO)
> > comes from.
> >
> > Taking a futher look at translate_dma_to_phy(), @dma_addr never falls within the
> > bus_dma_region ranges and returns 0.
> >
> > I'm suspecting an initialisation problem and if it occurred here, it will
> > likely show up elsewhere.
>
> Can you try this incremental patch?
>
> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
> index 088c97181ab146..c6b21acba7a459 100644
> --- a/include/linux/dma-direct.h
> +++ b/include/linux/dma-direct.h
> @@ -46,7 +46,7 @@ static inline phys_addr_t translate_dma_to_phys(struct device *dev,
> if (dma_addr >= m->dma_start && dma_addr - m->dma_start < m->size)
> return (phys_addr_t)dma_addr + m->offset;
>
> - return 0;
> + return (phys_addr_t)-1;

That did the trick - the stm32 platform driver's probe() function completes and
the remote processor is operatinal.

That being said the value returned by function dma_to_pfn()
is 0x137fff in the original code and 0xfffff with your patches applied.

Thanks,
Mathieu

> }
>
> #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA

\
 
 \ /
  Last update: 2020-09-15 21:57    [W:0.048 / U:5.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site