lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: dwc3: qcom: Honor wakeup enabled/disabled state
Date
The dwc3-qcom currently enables wakeup interrupts unconditionally
when suspending, however this should not be done when wakeup is
disabled (e.g. through the sysfs attribute power/wakeup). Only
enable wakeup interrupts when device_may_wakeup() returns true.

Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

drivers/usb/dwc3/dwc3-qcom.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index e1e78e9824b1..56d14c09506d 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -251,8 +251,10 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);

+ if (device_may_wakeup(qcom->dev))
+ dwc3_qcom_enable_interrupts(qcom);
+
qcom->is_suspended = true;
- dwc3_qcom_enable_interrupts(qcom);

return 0;
}
@@ -265,7 +267,8 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
if (!qcom->is_suspended)
return 0;

- dwc3_qcom_disable_interrupts(qcom);
+ if (device_may_wakeup(qcom->dev))
+ dwc3_qcom_disable_interrupts(qcom);

for (i = 0; i < qcom->num_clocks; i++) {
ret = clk_prepare_enable(qcom->clks[i]);
--
2.28.0.618.gf4bc123cb7-goog
\
 
 \ /
  Last update: 2020-09-15 21:41    [W:0.024 / U:5.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site