lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] arm64: dts: qcom: msm8996: Add VFE1_GDSC power domain to camss node
Date
As the MSM8996 has two VFE IP-blocks, and each has a power domain,
both of them have to be enabled. Previously only the power domain
of VFE0 was enabled, but not the domain for VFE1.

This patch adds the VFE1_GDSC power domain to the camss device tree
node of the MSM8996 soc.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 9951286db775..df6e1b246a19 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1009,7 +1009,8 @@ camss: camss@a00000 {
"ispif",
"vfe0",
"vfe1";
- power-domains = <&mmcc VFE0_GDSC>;
+ power-domains = <&mmcc VFE0_GDSC>,
+ <&mmcc VFE1_GDSC>;
clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
<&mmcc CAMSS_ISPIF_AHB_CLK>,
<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
--
2.25.1
\
 
 \ /
  Last update: 2020-09-15 16:32    [W:0.025 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site