lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 07/14] usb: typec: tcpci_maxim: Chip level TCPC driver
On Mon, Aug 31, 2020 at 07:59:20PM -0700, Badhri Jagan Sridharan wrote:
> Chip level TCPC driver for Maxim's TCPCI implementation.
> This TCPC implementation does not support the following
> commands: COMMAND.SinkVbus, COMMAND.SourceVbusDefaultVoltage,
> COMMAND.SourceVbusHighVoltage. Instead the sinking and sourcing
> from vbus is supported by writes to custom registers.
>
> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
> ---
> Changes since v1:
> - Changing patch version to v6 to fix version number confusion.
> - Removed setting USB_PSY and terminating description with period as
> suggested by Randy.
> ---
> drivers/usb/typec/tcpm/Kconfig | 5 +
> drivers/usb/typec/tcpm/Makefile | 13 +-
> drivers/usb/typec/tcpm/tcpci.h | 1 +
> drivers/usb/typec/tcpm/tcpci_maxim.c | 474 +++++++++++++++++++++++++++
> 4 files changed, 487 insertions(+), 6 deletions(-)
> create mode 100644 drivers/usb/typec/tcpm/tcpci_maxim.c
>
> diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
> index fa3f39336246..dd0d446a4613 100644
> --- a/drivers/usb/typec/tcpm/Kconfig
> +++ b/drivers/usb/typec/tcpm/Kconfig
> @@ -27,6 +27,11 @@ config TYPEC_RT1711H
> Type-C Port Controller Manager to provide USB PD and USB
> Type-C functionalities.
>
> +config TYPEC_TCPCI_MAXIM
> + tristate "Maxim TCPCI based Type-C chip driver"
> + help
> + MAXIM TCPCI based Type-C chip driver.
> +
> endif # TYPEC_TCPCI
>
> config TYPEC_FUSB302
> diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile
> index a5ff6c8eb892..58d001cf0dd2 100644
> --- a/drivers/usb/typec/tcpm/Makefile
> +++ b/drivers/usb/typec/tcpm/Makefile
> @@ -1,7 +1,8 @@
> # SPDX-License-Identifier: GPL-2.0
> -obj-$(CONFIG_TYPEC_TCPM) += tcpm.o
> -obj-$(CONFIG_TYPEC_FUSB302) += fusb302.o
> -obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o
> -typec_wcove-y := wcove.o
> -obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o
> -obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o
> +obj-$(CONFIG_TYPEC_TCPM) += tcpm.o
> +obj-$(CONFIG_TYPEC_FUSB302) += fusb302.o
> +obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o
> +typec_wcove-y := wcove.o
> +obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o
> +obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o
> +obj-$(CONFIG_TYPEC_TCPCI_MAXIM) += tcpci_maxim.o
> diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
> index 4d441bdf24d5..82f021a82456 100644
> --- a/drivers/usb/typec/tcpm/tcpci.h
> +++ b/drivers/usb/typec/tcpm/tcpci.h
> @@ -109,6 +109,7 @@
>
> #define TCPC_RX_BYTE_CNT 0x30
> #define TCPC_RX_BUF_FRAME_TYPE 0x31
> +#define TCPC_RX_BUF_FRAME_TYPE_SOP 0
> #define TCPC_RX_HDR 0x32
> #define TCPC_RX_DATA 0x34 /* through 0x4f */
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
> new file mode 100644
> index 000000000000..b61f290a8f96
> --- /dev/null
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
> @@ -0,0 +1,474 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020, Google LLC
> + *
> + * MAXIM TCPCI based TCPC driver
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/regmap.h>
> +#include <linux/usb/pd.h>
> +#include <linux/usb/tcpm.h>
> +#include <linux/usb/typec.h>
> +
> +#include "tcpci.h"
> +
> +#define PD_ACTIVITY_TIMEOUT_MS 10000
> +
> +#define TCPC_VENDOR_ALERT 0x80
> +
> +#define TCPC_RECEIVE_BUFFER_COUNT_OFFSET 0
> +#define TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET 1
> +#define TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET 2
> +
> +/*
> + * LongMessage not supported, hence 32 bytes for buf to be read from RECEIVE_BUFFER.
> + * DEVICE_CAPABILITIES_2.LongMessage = 0, the value in READABLE_BYTE_COUNT reg shall be
> + * less than or equal to 31. Since, RECEIVE_BUFFER len = 31 + 1(READABLE_BYTE_COUNT).
> + */
> +#define TCPC_RECEIVE_BUFFER_LEN 32
> +
> +#define MAX_BUCK_BOOST_SID 0x69
> +#define MAX_BUCK_BOOST_OP 0xb9
> +#define MAX_BUCK_BOOST_OFF 0
> +#define MAX_BUCK_BOOST_SOURCE 0xa
> +#define MAX_BUCK_BOOST_SINK 0x5
> +
> +struct max_tcpci_chip {
> + struct tcpci_data data;
> + struct tcpci *tcpci;
> + struct device *dev;
> + struct i2c_client *client;
> + struct tcpm_port *port;
> +};
> +
> +static const struct regmap_range max_tcpci_tcpci_range[] = {
> + regmap_reg_range(0x00, 0x95)
> +};
> +
> +const struct regmap_access_table max_tcpci_tcpci_write_table = {
> + .yes_ranges = max_tcpci_tcpci_range,
> + .n_yes_ranges = ARRAY_SIZE(max_tcpci_tcpci_range),
> +};
> +
> +static const struct regmap_config max_tcpci_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x95,
> + .wr_table = &max_tcpci_tcpci_write_table,
> +};
> +
> +static struct max_tcpci_chip *tdata_to_max_tcpci(struct tcpci_data *tdata)
> +{
> + return container_of(tdata, struct max_tcpci_chip, data);
> +}
> +
> +static int max_tcpci_read16(struct max_tcpci_chip *chip, unsigned int reg, u16 *val)
> +{
> + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16));
> +}
> +
> +static int max_tcpci_write16(struct max_tcpci_chip *chip, unsigned int reg, u16 val)
> +{
> + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16));
> +}
> +
> +static int max_tcpci_read8(struct max_tcpci_chip *chip, unsigned int reg, u8 *val)
> +{
> + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8));
> +}
> +
> +static int max_tcpci_write8(struct max_tcpci_chip *chip, unsigned int reg, u8 val)
> +{
> + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8));
> +}
> +
> +static void max_tcpci_init_regs(struct max_tcpci_chip *chip)
> +{
> + u16 alert_mask = 0;
> + int ret;
> +
> + ret = max_tcpci_write16(chip, TCPC_ALERT, 0xffff);
> + if (ret < 0) {
> + dev_err(chip->dev, "Error writing to TCPC_ALERT ret:%d\n", ret);
> + return;
> + }
> +
> + ret = max_tcpci_write16(chip, TCPC_VENDOR_ALERT, 0xffff);
> + if (ret < 0) {
> + dev_err(chip->dev, "Error writing to TCPC_VENDOR_ALERT ret:%d\n", ret);
> + return;
> + }
> +
> + alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED |
> + TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS |
> + TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS;
> +
> + ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask);
> + if (ret < 0) {
> + dev_err(chip->dev, "Error writing to TCPC_ALERT_MASK ret:%d\n", ret);
> + return;
> + }
> +
> + /* Enable vbus voltage monitoring and voltage alerts */
> + ret = max_tcpci_write8(chip, TCPC_POWER_CTRL, 0);
> + if (ret < 0) {
> + dev_err(chip->dev, "Error writing to TCPC_POWER_CTRL ret:%d\n", ret);
> + return;
> + }
> +}
> +
> +static void process_rx(struct max_tcpci_chip *chip, u16 status)
> +{
> + struct pd_message msg;
> + u8 count, frame_type, rx_buf[TCPC_RECEIVE_BUFFER_LEN];
> + int ret, payload_index;
> + u8 *rx_buf_ptr;
> +
> + /*
> + * READABLE_BYTE_COUNT: Indicates the number of bytes in the RX_BUF_BYTE_x registers
> + * plus one (for the RX_BUF_FRAME_TYPE) Table 4-36.
> + * Read the count and frame type.
> + */
> + ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, 2);
> + if (ret < 0) {
> + dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d", ret);
> + return;
> + }
> +
> + count = rx_buf[TCPC_RECEIVE_BUFFER_COUNT_OFFSET];
> + frame_type = rx_buf[TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET];
> +
> + if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) {
> + max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
> + dev_err(chip->dev, "%s", count == 0 ? "error: count is 0" :
> + "error frame_type is not SOP");
> + return;
> + }
> +
> + if (count > sizeof(struct pd_message) || count + 1 > TCPC_RECEIVE_BUFFER_LEN) {
> + dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d", count);
> + return;
> + }
> +
> + /*
> + * Read count + 1 as RX_BUF_BYTE_x is hidden and can only be read through
> + * TCPC_RX_BYTE_CNT
> + */
> + count += 1;
> + ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, count);
> + if (ret < 0) {
> + dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d", ret);
> + return;
> + }
> +
> + rx_buf_ptr = rx_buf + TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET;
> + msg.header = cpu_to_le16(*(u16 *)rx_buf_ptr);
> + rx_buf_ptr = rx_buf_ptr + sizeof(msg.header);
> + for (payload_index = 0; payload_index < pd_header_cnt_le(msg.header); payload_index++,
> + rx_buf_ptr += sizeof(msg.payload[0]))
> + msg.payload[payload_index] = cpu_to_le32(*(u32 *)rx_buf_ptr);
> +
> + /*
> + * Read complete, clear RX status alert bit.
> + * Clear overflow as well if set.
> + */
> + ret = max_tcpci_write16(chip, TCPC_ALERT, status & TCPC_ALERT_RX_BUF_OVF ?
> + TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF :
> + TCPC_ALERT_RX_STATUS);
> + if (ret < 0)
> + return;
> +
> + tcpm_pd_receive(chip->port, &msg);
> +}
> +
> +static int max_tcpci_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, bool source, bool sink)
> +{
> + struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
> + u8 buffer_source[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SOURCE};
> + u8 buffer_sink[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SINK};
> + u8 buffer_none[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_OFF};
> + struct i2c_client *i2c = chip->client;
> + int ret;
> +
> + struct i2c_msg msgs[] = {
> + {
> + .addr = MAX_BUCK_BOOST_SID,
> + .flags = i2c->flags & I2C_M_TEN,
> + .len = 2,
> + .buf = source ? buffer_source : sink ? buffer_sink : buffer_none,
> + },
> + };
> +
> + if (source && sink) {
> + dev_err(chip->dev, "Both source and sink set\n");
> + return -EINVAL;
> + }

So can buffer_none ever be used?

> + ret = i2c_transfer(i2c->adapter, msgs, 1);
> +
> + return ret < 0 ? ret : 1;
> +}
> +
> +static void process_power_status(struct max_tcpci_chip *chip)
> +{
> + u8 pwr_status;
> + int ret;
> +
> + ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &pwr_status);
> + if (ret < 0)
> + return;
> +
> + if (pwr_status == 0xff)
> + max_tcpci_init_regs(chip);
> + else
> + tcpm_vbus_change(chip->port);
> +}
> +
> +static void process_tx(struct max_tcpci_chip *chip, u16 status)
> +{
> + if (status & TCPC_ALERT_TX_SUCCESS)
> + tcpm_pd_transmit_complete(chip->port, TCPC_TX_SUCCESS);
> + else if (status & TCPC_ALERT_TX_DISCARDED)
> + tcpm_pd_transmit_complete(chip->port, TCPC_TX_DISCARDED);
> + else if (status & TCPC_ALERT_TX_FAILED)
> + tcpm_pd_transmit_complete(chip->port, TCPC_TX_FAILED);
> +
> + /* Reinit regs as Hard reset sets them to default value */
> + if ((status & TCPC_ALERT_TX_SUCCESS) && (status & TCPC_ALERT_TX_FAILED))
> + max_tcpci_init_regs(chip);
> +}
> +
> +static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
> +{
> + u16 mask;
> + int ret;
> +
> + /*
> + * Clear alert status for everything except RX_STATUS, which shouldn't
> + * be cleared until we have successfully retrieved message.
> + */
> + if (status & ~TCPC_ALERT_RX_STATUS) {
> + mask = status & TCPC_ALERT_RX_BUF_OVF ?
> + status & ~(TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF) :
> + status & ~TCPC_ALERT_RX_STATUS;
> + ret = max_tcpci_write16(chip, TCPC_ALERT, mask);
> + if (ret < 0) {
> + dev_err(chip->dev, "ALERT clear failed\n");
> + return ret;
> + }
> + }
> +
> + if (status & TCPC_ALERT_RX_BUF_OVF && !(status & TCPC_ALERT_RX_STATUS)) {
> + ret = max_tcpci_write16(chip, TCPC_ALERT, (TCPC_ALERT_RX_STATUS |
> + TCPC_ALERT_RX_BUF_OVF));
> + if (ret < 0) {
> + dev_err(chip->dev, "ALERT clear failed\n");
> + return ret;
> + }
> + }
> +
> + if (status & TCPC_ALERT_RX_STATUS)
> + process_rx(chip, status);
> +
> + if (status & TCPC_ALERT_TX_DISCARDED)
> + dev_info(chip->dev, "TX_DISCARDED");

What does that mean? Is it relevant for the user?

> +
> + if (status & TCPC_ALERT_VBUS_DISCNCT)
> + tcpm_vbus_change(chip->port);
> +
> + if (status & TCPC_ALERT_CC_STATUS)
> + tcpm_cc_change(chip->port);
> +
> + if (status & TCPC_ALERT_POWER_STATUS)
> + process_power_status(chip);
> +
> + if (status & TCPC_ALERT_RX_HARD_RST) {
> + tcpm_pd_hard_reset(chip->port);
> + max_tcpci_init_regs(chip);
> + }
> +
> + if (status & TCPC_ALERT_TX_SUCCESS || status & TCPC_ALERT_TX_DISCARDED || status &
> + TCPC_ALERT_TX_FAILED)
> + process_tx(chip, status);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t max_tcpci_irq(int irq, void *dev_id)
> +{
> + struct max_tcpci_chip *chip = dev_id;
> + u16 status;
> + irqreturn_t irq_return;
> + int ret;
> +
> + if (!chip->port)
> + return IRQ_HANDLED;
> +
> + ret = max_tcpci_read16(chip, TCPC_ALERT, &status);
> + if (ret < 0) {
> + dev_err(chip->dev, "ALERT read failed\n");
> + return ret;
> + }
> + while (status) {
> + irq_return = _max_tcpci_irq(chip, status);
> + /* Do not return if the ALERT is already set. */
> + ret = max_tcpci_read16(chip, TCPC_ALERT, &status);
> + if (ret < 0)
> + break;
> + }
> +
> + return irq_return;
> +}
> +
> +static irqreturn_t max_tcpci_isr(int irq, void *dev_id)
> +{
> + struct max_tcpci_chip *chip = dev_id;
> +
> + pm_wakeup_event(chip->dev, PD_ACTIVITY_TIMEOUT_MS);
> +
> + if (!chip->port)
> + return IRQ_HANDLED;
> +
> + return IRQ_WAKE_THREAD;
> +}
> +
> +static int max_tcpci_init_alert(struct max_tcpci_chip *chip, struct i2c_client *client)
> +{
> + int ret, irq_gpio;
> +
> + irq_gpio = of_get_named_gpio(client->dev.of_node, "usbpd,usbpd_int", 0);
> + client->irq = gpio_to_irq(irq_gpio);
> + if (!client->irq)
> + return -ENODEV;
> +
> + ret = devm_request_threaded_irq(chip->dev, client->irq, max_tcpci_isr, max_tcpci_irq,
> + (IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev),
> + chip);
> +
> + if (ret < 0)
> + return ret;
> +
> + enable_irq_wake(client->irq);
> + return 0;
> +}
> +
> +static int max_tcpci_start_toggling(struct tcpci *tcpci, struct tcpci_data *tdata,
> + enum typec_cc_status cc)
> +{
> + struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
> +
> + max_tcpci_init_regs(chip);
> +
> + return 0;
> +}
> +
> +static int tcpci_init(struct tcpci *tcpci, struct tcpci_data *data)
> +{
> + /*
> + * Generic TCPCI overwrites the regs once this driver initializes
> + * them. Prevent this by returning -1.
> + */
> + return -1;
> +}
> +
> +static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id)
> +{
> + int ret;
> + struct max_tcpci_chip *chip;
> + u8 power_status;
> +
> + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + chip->client = client;
> + chip->data.regmap = devm_regmap_init_i2c(client, &max_tcpci_regmap_config);
> + if (IS_ERR(chip->data.regmap)) {
> + dev_err(&client->dev, "Regmap init failed\n");
> + return PTR_ERR(chip->data.regmap);
> + }
> +
> + chip->dev = &client->dev;
> + i2c_set_clientdata(client, chip);
> +
> + ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &power_status);
> + if (ret < 0)
> + return ret;
> +
> + if (power_status & TCPC_POWER_STATUS_UNINIT) {
> + dev_err(&client->dev, "TCPC not ready!");
> + return -EPROBE_DEFER;
> + }

That looks wrong. There is no guarantee that this wasn't the last
device that is registered for a while. Or is there?

I think you should consider TCPC_POWER_STATUS_UNINIT in tcpci_init(),
just like tcpci.c does. Or is there some reason why you are checking
it here?

> +
> + /* Chip level tcpci callbacks */
> + chip->data.set_vbus = max_tcpci_set_vbus;
> + chip->data.start_drp_toggling = max_tcpci_start_toggling;
> + chip->data.TX_BUF_BYTE_x_hidden = true;
> + chip->data.init = tcpci_init;
> +
> + max_tcpci_init_regs(chip);
> + chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
> + if (IS_ERR_OR_NULL(chip->tcpci)) {
> + dev_err(&client->dev, "TCPCI port registration failed");
> + ret = PTR_ERR(chip->tcpci);
> + return PTR_ERR(chip->tcpci);
> + }
> + chip->port = tcpci_get_tcpm_port(chip->tcpci);
> + ret = max_tcpci_init_alert(chip, client);
> + if (ret < 0)
> + goto unreg_port;
> +
> + device_init_wakeup(chip->dev, true);
> + return 0;
> +
> +unreg_port:
> + tcpci_unregister_port(chip->tcpci);
> +
> + return ret;
> +}
> +
> +static int max_tcpci_remove(struct i2c_client *client)
> +{
> + struct max_tcpci_chip *chip = i2c_get_clientdata(client);
> +
> + if (!IS_ERR_OR_NULL(chip->tcpci))
> + tcpci_unregister_port(chip->tcpci);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id max_tcpci_id[] = {
> + { "maxtcpc", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, max_tcpci_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id max_tcpci_of_match[] = {
> + { .compatible = "maxim,tcpc", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, max_tcpci_of_match);
> +#endif
> +
> +static struct i2c_driver max_tcpci_i2c_driver = {
> + .driver = {
> + .name = "maxtcpc",
> + .of_match_table = of_match_ptr(max_tcpci_of_match),
> + },
> + .probe = max_tcpci_probe,
> + .remove = max_tcpci_remove,
> + .id_table = max_tcpci_id,
> +};
> +module_i2c_driver(max_tcpci_i2c_driver);
> +
> +MODULE_AUTHOR("Badhri Jagan Sridharan <badhri@google.com>");
> +MODULE_DESCRIPTION("Maxim TCPCI based USB Type-C Port Controller Interface Driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.28.0.402.g5ffc5be6b7-goog

thanks,

--
heikki

\
 
 \ /
  Last update: 2020-09-15 14:52    [W:0.581 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site