[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v3 2/3] dt-bindings: usb: cdns,usb3: Add cdns,phyrst-a-enable property
Controller version 0x0002450D has USB2 PHY RX sensitivity issues
that needs to be worked around by enabling phyrst-a-enable bit
in PHYRST_CFG register.

There is no way to know controller version before device controller
is started and the workaround needs to be applied for both host and
device modes, so we add this DT property.

Signed-off-by: Roger Quadros <>
Acked-by: Rob Herring <>
Documentation/devicetree/bindings/usb/cdns,usb3.yaml | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index 9b14c8443d39..ac20b98e9910 100644
--- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -61,6 +61,10 @@ properties:
buffers expressed in KB
$ref: /schemas/types.yaml#/definitions/uint32

+ cdns,phyrst-a-enable:
+ description: Enable resetting of PHY if Rx fail is detected
+ type: boolean
- compatible
- reg
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
 \ /
  Last update: 2020-09-15 14:06    [W:0.031 / U:6.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site