lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 5/5] irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs
Date
From: Suman Anna <s-anna@ti.com>

The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP,
commonly called ICSSG. The PRUSS INTC present within the ICSSG supports
more System Events (160 vs 64), more Interrupt Channels and Host Interrupts
(20 vs 10) compared to the previous generation PRUSS INTC instances. The
first 2 and the last 10 of these host interrupt lines are used by the
PRU and other auxiliary cores and sub-modules within the ICSSG, with 8
host interrupts connected to MPU. The host interrupts 5, 6, 7 are also
connected to the other ICSSG instances within the SoC and can be
partitioned as per system integration through the board dts files.

Enhance the PRUSS INTC driver to add support for this ICSSG INTC
instance.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
---
v5->v6:
- No change.
v4->v5:
- Rename: s/num_host_intrs/num_host_events/ regarding to change
introduced in patch #2.
v3->v4:
- Move generic part to "irqchip/irq-pruss-intc: Add a PRUSS irqchip
driver for PRUSS interrupts" patch and leave only platform related
code.
v2->v3:
- Change patch order: use it directly after "irqchip/irq-pruss-intc:
Implement irq_{get,set}_irqchip_state ops" and before new
"irqchip/irq-pruss-intc: Add event mapping support" in order to reduce
diff.
v1->v2:
- https://patchwork.kernel.org/patch/11069773/
---
drivers/irqchip/Kconfig | 2 +-
drivers/irqchip/irq-pruss-intc.c | 9 +++++++++
2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 733e59f..25c8944 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -495,7 +495,7 @@ config TI_SCI_INTA_IRQCHIP

config TI_PRUSS_INTC
tristate "TI PRU-ICSS Interrupt Controller"
- depends on ARCH_DAVINCI || SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE
+ depends on ARCH_DAVINCI || SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3
select IRQ_DOMAIN
help
This enables support for the PRU-ICSS Local Interrupt Controller
diff --git a/drivers/irqchip/irq-pruss-intc.c b/drivers/irqchip/irq-pruss-intc.c
index 41c6271..4be501e 100644
--- a/drivers/irqchip/irq-pruss-intc.c
+++ b/drivers/irqchip/irq-pruss-intc.c
@@ -628,11 +628,20 @@ static const struct pruss_intc_match_data pruss_intc_data = {
.num_host_events = 10,
};

+static const struct pruss_intc_match_data icssg_intc_data = {
+ .num_system_events = 160,
+ .num_host_events = 20,
+};
+
static const struct of_device_id pruss_intc_of_match[] = {
{
.compatible = "ti,pruss-intc",
.data = &pruss_intc_data,
},
+ {
+ .compatible = "ti,icssg-intc",
+ .data = &icssg_intc_data,
+ },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, pruss_intc_of_match);
--
2.7.4
\
 
 \ /
  Last update: 2020-09-16 02:58    [W:0.034 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site