lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1] soc: fsl: rcpm: Add ACPI support
From
Date
On 9/15/20 1:06 PM, kuldip dwivedi wrote:
> Add ACPI support in fsl RCPM driver. This is required
> to support ACPI S3 state. S3 is the ACPI sleep state
> that is known as "sleep" or "suspend to RAM".
> It essentially turns off most power of the system but
> keeps memory powered.
>
> Signed-off-by: tanveer <tanveer.alam@puresoftware.com>
> Signed-off-by: kuldip dwivedi <kuldip.dwivedi@puresoftware.com>

Why does the OS need to program this device? Can't this be done by firmware?

> ---
>
> Notes:
> 1. Add ACPI match table
> 2. NXP team members are added for confirming HID changes
> 3. There is only one node in ACPI so no need to check for
> current device explicitly
> 4. These changes are tested on LX2160A and LS1046A platforms
>
> drivers/soc/fsl/rcpm.c | 22 +++++++++++++++++++---
> 1 file changed, 19 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
> index a093dbe6d2cb..e75a436fb159 100644
> --- a/drivers/soc/fsl/rcpm.c
> +++ b/drivers/soc/fsl/rcpm.c
> @@ -2,10 +2,12 @@
> //
> // rcpm.c - Freescale QorIQ RCPM driver
> //
> -// Copyright 2019 NXP
> +// Copyright 2019-2020 NXP
> +// Copyright 2020 Puresoftware Ltd.
> //
> // Author: Ran Wang <ran.wang_1@nxp.com>
>
> +#include <linux/acpi.h>
> #include <linux/init.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> @@ -57,8 +59,13 @@ static int rcpm_pm_prepare(struct device *dev)
> rcpm->wakeup_cells + 1);
>
> /* Wakeup source should refer to current rcpm device */
> - if (ret || (np->phandle != value[0]))
> - continue;
> + if (is_acpi_node(dev->fwnode)) {
> + if (ret)
> + continue;
> + } else {
> + if (ret || (np->phandle != value[0]))
> + continue;
> + }
>
> /* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the
> * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup"
> @@ -139,10 +146,19 @@ static const struct of_device_id rcpm_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, rcpm_of_match);
>
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id rcpm_acpi_match[] = {
> + { "NXP0015", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, rcpm_acpi_match);
> +#endif
> +
> static struct platform_driver rcpm_driver = {
> .driver = {
> .name = "rcpm",
> .of_match_table = rcpm_of_match,
> + .acpi_match_table = ACPI_PTR(rcpm_acpi_match),
> .pm = &rcpm_pm_ops,
> },
> .probe = rcpm_probe,
>

\
 
 \ /
  Last update: 2020-09-16 02:57    [W:0.056 / U:12.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site