lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] ASoC: tlv320aic32x4: Enable fast charge
On 15/09/2020 12:50:34+0100, Mark Brown wrote:
> On Tue, Sep 15, 2020 at 10:26:02AM +0200, Alexandre Belloni wrote:
> > On 11/09/2020 19:31:40+0200, Miquel Raynal wrote:
>
> > > + /*
> > > + * Enable the fast charging feature and ensure the needed 40ms ellapsed
> > > + * before using the analog circuits.
> > > + */
> > > + snd_soc_component_write(component, AIC32X4_REFPOWERUP,
> > > + AIC32X4_REFPOWERUP_40MS);
> > > + msleep(40);
> > > +
>
> > Maybe the actual REFPOWERUP value could be exposed as a control so
> > userspace has a way to set the policy?
>
> We very rarely do this, there's not usially anything
>

Could you suggest something then? This mainly changes the power
codec power consumption. I guess people will want to trade latency
for less consumption.

> > I'm not sure it make sense to have the delay in probe because it is not
> > enable the analog part of the codec. The delay should probable be after
> > the clocks have been set up because the datasheet says that it is mdac
> > and madc that is starting the analog circuitry.
>
> Deferring the delay to a workqueue is the usual thing where there's
> concerns about slowing down boot.

Well, that was not my concern. I didn't realize Miquel actually used the
Force power-up values and though the actual power up happened after
configuring the clocks (as is the case for the dafule values). In this
case, the delay is at the proper location.

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-09-16 02:44    [W:0.093 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site