lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: usb: Add binding for onboard USB hubs
On Mon, Sep 14, 2020 at 11:27:48AM -0700, Matthias Kaehlcke wrote:
> Onboard USB hubs need to be powered and may require initiaization of
> other resources (like GPIOs or clocks) to work properly. This adds
> a device tree binding for these hubs.

We already have bindings for these. 2 in fact as I2C controlled hubs are
often described under the I2C bus.

>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> ---
>
> .../bindings/usb/onboard_usb_hub.yaml | 70 +++++++++++++++++++
> 1 file changed, 70 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml b/Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
> new file mode 100644
> index 000000000000..f82d8f459eed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/onboard_usb_hub.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Binding for onboard USB hubs
> +
> +maintainers:
> + - Matthias Kaehlcke <mka@chromium.org>
> +
> +allOf:
> + - $ref: /schemas/usb/onboard_usb_hub.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - onboard-usb-hub
> + - realtek,rts5411
> +
> + power-off-in-suspend:
> + description:
> + The hub should be powered off during system suspend. When the
> + "wakeup-source" property is also provided the hub is only powered
> + off during suspend when no wakeup capable descendants are connected.
> + type: boolean
> +
> + vdd-supply:
> + description:
> + phandle to the regulator that provides power to the hub.
> +
> + wakeup-source:
> + description:
> + Wakeup capable USB devices connected to this hub can be used as
> + wakeup source.
> + type: boolean
> +
> +required:
> + - compatible
> + - vdd-supply
> +
> +examples:
> + - |
> + usb_hub: usb-hub {
> + compatible = "realtek,rts5411", "onboard-usb-hub";
> + vdd-supply = <&pp3300_hub>;
> + power-off-in-suspend;
> + wakeup-source;

This is the hub device?

> + };
> +
> + &usb_1_dwc3 {
> + dr_mode = "host";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* 2.0 hub on port 1 */
> + hub@1 {
> + compatible = "usbbda,5411";
> + reg = <1>;
> + hub = <&usb_hub>;

Or this node is?

> + };
> +
> + /* 3.0 hub on port 2 */
> + hub@2 {
> + compatible = "usbbda,411";
> + reg = <2>;
> + hub = <&usb_hub>;

Or this node is?

The hub node belongs here.

If you really have it connected to 2 upstream ports, then just do
one node with 'reg = <1 2>;'.

Rob

> + };
> +
> +...
> --
> 2.28.0.618.gf4bc123cb7-goog
>

\
 
 \ /
  Last update: 2020-09-16 02:17    [W:0.125 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site