lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.8 008/177] ARM: dts: omap5: Fix DSI base address and clocks
Date
From: David Shah <dave@ds0.me>

[ Upstream commit 6542e2b613c2b1952e83973dc434831332ce8e27 ]

DSI was not probing due to base address off by 0x1000, and sys_clk
missing.

With this patch, the Pyra display works if HDMI is disabled in the
device tree.

Fixes: 5a507162f096 ("ARM: dts: Configure interconnect target module for omap5 dsi1")
Signed-off-by: David Shah <dave@ds0.me>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
[tony@atomide.com: standardized subject line, added fixes tag]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/omap5.dtsi | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index fb889c5b00c9d..de55ac5e60f39 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -463,11 +463,11 @@
};
};

- target-module@5000 {
+ target-module@4000 {
compatible = "ti,sysc-omap2", "ti,sysc";
- reg = <0x5000 0x4>,
- <0x5010 0x4>,
- <0x5014 0x4>;
+ reg = <0x4000 0x4>,
+ <0x4010 0x4>,
+ <0x4014 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@@ -479,7 +479,7 @@
ti,syss-mask = <1>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x5000 0x1000>;
+ ranges = <0 0x4000 0x1000>;

dsi1: encoder@0 {
compatible = "ti,omap5-dsi";
@@ -489,8 +489,9 @@
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
- clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
- clock-names = "fck";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
};
};

@@ -520,8 +521,9 @@
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
- clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
- clock-names = "fck";
+ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
};
};

--
2.25.1


\
 
 \ /
  Last update: 2020-09-16 01:49    [W:0.768 / U:13.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site