lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] PCI: Add quirks for Juniper ASICs to fix PCIe gen
Date
Some of the Juniper ASICs report incorrect PCIe gen type for the PCIe
link to the root port. Make the root port to ignore these fields.
        
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Ming Qiao <mqiao@juniper.net>
---
drivers/pci/quirks.c | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 04dd490..0a28a09 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5658,6 +5658,45 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JUNIPER, 0x00A9, quirk_jnx_fpga);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JUNIPER, 0x00AA, quirk_jnx_fpga);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_XILINX, 0x0505, quirk_jnx_fpga);

+static struct dmi_system_id jnx_asic_pci_bug_affected_platforms[] = {
+ {
+ .ident = "Juniper Networks PTX MLC Card",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Juniper Networks Inc."),
+ DMI_MATCH(DMI_BOARD_NAME, "0C0A")
+ },
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(dmi, jnx_asic_pci_bug_affected_platforms);
+
+#define INTEL_DEBUG_REG 0x8F8
+#define INTEL_DEBUG_REG_IGNORE_GEN BIT(3)
+
+/*
+ * Some Juniper ASICs have an issue where they report incorrect gen type
+ * (Gen-1 / Gen-2) for the PCIe link to the root port.
+ * This workaround needs to be applied to each Intel root port which connects
+ * to such juniper ASIC. It causes the root port to ignore the incorrect
+ * fields.
+ */
+static void fixup_jnx_intel_root_port(struct pci_dev *dev)
+{
+ struct pci_dev *root;
+ u32 tmp32;
+ int ret;
+
+ root = pcie_find_root_port(dev);
+ if (!root || root->vendor != PCI_VENDOR_ID_INTEL)
+ return;
+
+ ret = pci_read_config_dword(root, INTEL_DEBUG_REG, &tmp32);
+ tmp32 |= INTEL_DEBUG_REG_IGNORE_GEN;
+ ret |= pci_write_config_dword(root, INTEL_DEBUG_REG, tmp32);
+ if (ret)
+ dev_err(&root->dev, "Failed on root port quirk. CONFIG_PCI_MMCONFIG not selected?\n");
+}
+
/*
* PCI class reported by some Juniper ASICs is not correct.
* Change it to NETWORK.
@@ -5665,6 +5704,9 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_XILINX, 0x0505, quirk_jnx_fpga);
static void quirk_jnx_asic(struct pci_dev *dev)
{
dev->class = PCI_CLASS_NETWORK_OTHER << 8;
+
+ if (dmi_check_system(jnx_asic_pci_bug_affected_platforms))
+ fixup_jnx_intel_root_port(dev)
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JUNIPER, 0x003C, quirk_jnx_asic);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JUNIPER, 0x003D, quirk_jnx_asic);
--
2.10.0
\
 
 \ /
  Last update: 2020-09-16 00:26    [W:0.045 / U:4.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site