lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2 1/4] dt-bindings: input: Convert rotary-encoder bindings to schema
On Mon, Sep 07, 2020 at 10:40:42PM +0200, Sebastian Reichel wrote:
> Convert rotary-encoder bindings to YAML schema.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
> .../bindings/input/rotary-encoder.txt | 50 ---------
> .../bindings/input/rotary-encoder.yaml | 100 ++++++++++++++++++
> 2 files changed, 100 insertions(+), 50 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.txt
> create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt
> deleted file mode 100644
> index a644408b33b8..000000000000
> --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -Rotary encoder DT bindings
> -
> -Required properties:
> -- gpios: a spec for at least two GPIOs to be used, most significant first
> -
> -Optional properties:
> -- linux,axis: the input subsystem axis to map to this rotary encoder.
> - Defaults to 0 (ABS_X / REL_X)
> -- rotary-encoder,steps: Number of steps in a full turnaround of the
> - encoder. Only relevant for absolute axis. Defaults to 24 which is a
> - typical value for such devices.
> -- rotary-encoder,relative-axis: register a relative axis rather than an
> - absolute one. Relative axis will only generate +1/-1 events on the input
> - device, hence no steps need to be passed.
> -- rotary-encoder,rollover: Automatic rollover when the rotary value becomes
> - greater than the specified steps or smaller than 0. For absolute axis only.
> -- rotary-encoder,steps-per-period: Number of steps (stable states) per period.
> - The values have the following meaning:
> - 1: Full-period mode (default)
> - 2: Half-period mode
> - 4: Quarter-period mode
> -- wakeup-source: Boolean, rotary encoder can wake up the system.
> -- rotary-encoder,encoding: String, the method used to encode steps.
> - Supported are "gray" (the default and more common) and "binary".
> -
> -Deprecated properties:
> -- rotary-encoder,half-period: Makes the driver work on half-period mode.
> - This property is deprecated. Instead, a 'steps-per-period ' value should
> - be used, such as "rotary-encoder,steps-per-period = <2>".
> -
> -See Documentation/input/devices/rotary-encoder.rst for more information.
> -
> -Example:
> -
> - rotary@0 {
> - compatible = "rotary-encoder";
> - gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
> - linux,axis = <0>; /* REL_X */
> - rotary-encoder,encoding = "gray";
> - rotary-encoder,relative-axis;
> - };
> -
> - rotary@1 {
> - compatible = "rotary-encoder";
> - gpios = <&gpio 21 0>, <&gpio 22 0>;
> - linux,axis = <1>; /* ABS_Y */
> - rotary-encoder,steps = <24>;
> - rotary-encoder,encoding = "binary";
> - rotary-encoder,rollover;
> - };
> diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.yaml b/Documentation/devicetree/bindings/input/rotary-encoder.yaml
> new file mode 100644
> index 000000000000..5b60ea86bd62
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/rotary-encoder.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/rotary-encoder.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Generic Rotary Encoder
> +
> +maintainers:
> + - Dmitry Torokhov <dmitry.torokhov@gmail.com>
> +
> +description:
> + See Documentation/input/devices/rotary-encoder.rst for more information.
> +
> +properties:
> + compatible:
> + const: rotary-encoder
> +
> + gpios:
> + minItems: 2

You need to specify maxItems too. A 'should be enough for everyone'TM
value is fine here if there's no real max.

> + description: GPIOs for the rotation signals, most significant first
> +
> + linux,axis:
> + description:
> + The input subsystem axis to map to this rotary encoder.
> + Defaults to (ABS_X / REL_X).
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 0
> +
> + rotary-encoder,rollover:
> + description:
> + Automatic rollover when the rotary value becomes greater than the
> + specified steps or smaller than 0. For absolute axis only.
> + type: boolean
> +
> + rotary-encoder,steps-per-period:
> + description: The values have the following meaning
> + 1 - Full-period mode
> + 2 - Half-period mode
> + 4 - Quarter-period mode

You need a '|' after 'descripton' to preserve formatting here.

> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4]
> + default: 1
> +
> + wakeup-source:
> + description: Rotary encoder can wake up the system.
> + type: boolean
> +
> + rotary-encoder,encoding:
> + description:
> + Method used to encode steps. Gray code is more common.
> + $ref: /schemas/types.yaml#/definitions/string
> + enum: ["gray", "binary"]
> + default: "gray"

Don't need quotes.

> +
> + rotary-encoder,half-period:
> + description:
> + Deprecated, use "rotary-encoder,steps-per-period = <2>" instead.
> + type: boolean
> + deprecated: True
> +
> + rotary-encoder,steps:
> + description:
> + Number of steps in a full turnaround of the encoder. Only relevant
> + for absolute axis. Defaults to 24 which is a typical value for such
> + devices.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 24
> +
> + rotary-encoder,relative-axis:
> + description:
> + register a relative axis rather than an absolute one. Relative axis
> + will only generate +1/-1 events on the input device, hence no steps
> + need to be passed.
> + type: boolean
> +
> +required:
> + - compatible
> + - gpios
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include "dt-bindings/gpio/gpio.h"
> + #include "dt-bindings/input/input.h"
> + rotary-encoder0 {
> + compatible = "rotary-encoder";
> + gpios = <&gpio 19 GPIO_ACTIVE_LOW>, <&gpio 20 GPIO_ACTIVE_HIGH>;
> + linux,axis = <REL_X>;
> + rotary-encoder,encoding = "gray";
> + rotary-encoder,relative-axis;
> + };
> + rotary-encoder1 {
> + compatible = "rotary-encoder";
> + gpios = <&gpio 21 GPIO_ACTIVE_HIGH>, <&gpio 22 GPIO_ACTIVE_HIGH>;
> + linux,axis = <ABS_Y>;
> + rotary-encoder,encoding = "binary";
> + rotary-encoder,rollover;
> + };
> --
> 2.28.0
>

\
 
 \ /
  Last update: 2020-09-16 00:26    [W:0.096 / U:9.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site