lkml.org 
[lkml]   [2020]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/2] media: i2c: Add driver for the Analog Devices ADDI9036 ToF front-end
Hi Bogdan,

On Fri, Sep 11, 2020 at 01:32:39PM +0000, Togorean, Bogdan wrote:
> > On Thu, Sep 10, 2020 at 07:24:06PM +0300, Bogdan Togorean wrote:
> > > The ADDI9036 is a complete, 45 MHz, front-end solution for charge
> > > coupled device (CCD) time of flight (TOF) imaging applications.
> > >
> > > It has 2-lane MIPI CSI-2 RAW12 data output and i2c control interface.
> > >
> > > The programming of calibration and firmware is performed by userspace
> > > SDK through CID_USER class IOCTLs.
> >
> > I'm afraid that's not acceptable. The firmware should be loaded using
> > the Linux kernel firmware API. As for calibration, is it static data ?
> > How is it generated ?
>
> Calibration data is static data, generated at production and stored on and EEPROM
> memory on camera board. The camera board consists mainly of ADDI9036 processor
> + CCD image sensor + EEPROM.
>
> The firmware is a set of (address, data) tuples that are written via I2C.

Is it a firmware in the sense of software running on the ADDI9036, or is
it a device configuration to be loaded in registers ?

> We want this driver to be a generic one and support all implementations
> of ADDI9036 ToF processor. Now the problem is that some implementations
> store firmware + calibration on external EEPROM and some store just calibration
> data on EEPROM and firmware is loaded from a file stored in SDK. With the help
> of the 2 custom controls we move the camera model detection, firmware
> and calibration fetching from driver to user space SDK.
>
> Also an important point is that the ToF processor has 3 operating modes
> (near, medium and far). At each mode change a new set of firmware +
> calibration data is loaded into ADDI9036 chip. If we move the firmware loading
> in driver we would still need a custom enumeration control to select the working mode.
>
> > > Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
> > > ---
> > > MAINTAINERS | 10 +
> > > drivers/media/i2c/Kconfig | 14 +
> > > drivers/media/i2c/Makefile | 1 +
> > > drivers/media/i2c/addi9036.c | 673 +++++++++++++++++++++++++++++
> > > include/uapi/linux/v4l2-controls.h | 6 +
> > > 5 files changed, 704 insertions(+)
> > > create mode 100644 drivers/media/i2c/addi9036.c
> > >
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index b5cfab015bd6..fb03ad9ca920 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -477,6 +477,16 @@ W: http://wiki.analog.com/AD7879
> > > W: http://ez.analog.com/community/linux-device-drivers
> > > F: drivers/input/touchscreen/ad7879.c
> > >
> > > +ADDI9036 TOF FRONTEND DRIVER
> > > +M: Bogdan Togorean <bogdan.togorean@analog.com>
> > > +L: linux-media@vger.kernel.org
> > > +S: Supported
> > > +W: https://www.analog.com/en/products/addi9036.html
> > > +W: http://ez.analog.com/community/linux-device-drivers
> > > +T: git git://linuxtv.org/media_tree.git
> > > +F: Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
> > > +F: drivers/media/i2c/addi9036.c
> > > +
> > > ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
> > > M: Jiri Kosina <jikos@kernel.org>
> > > S: Maintained
> > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > > index c7ba76fee599..087dd307505d 100644
> > > --- a/drivers/media/i2c/Kconfig
> > > +++ b/drivers/media/i2c/Kconfig
> > > @@ -725,6 +725,20 @@ config VIDEO_APTINA_PLL
> > > config VIDEO_SMIAPP_PLL
> > > tristate
> > >
> > > +config VIDEO_ADDI9036
> > > + tristate "Analog Devices ADDI9036 ToF front-end support"
> > > + depends on I2C && VIDEO_V4L2
> > > + select MEDIA_CONTROLLER
> > > + select VIDEO_V4L2_SUBDEV_API
> > > + select V4L2_FWNODE
> > > + select REGMAP_I2C
> > > + help
> > > + This is a Video4Linux2 driver for Analog Devices ADDI9036
> > > + Time of Flight front-end.
> > > +
> > > + To compile this driver as a module, choose M here: the
> > > + module will be called addi9036.
> > > +
> > > config VIDEO_HI556
> > > tristate "Hynix Hi-556 sensor support"
> > > depends on I2C && VIDEO_V4L2
> > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > > index f0a77473979d..631a7c7612ca 100644
> > > --- a/drivers/media/i2c/Makefile
> > > +++ b/drivers/media/i2c/Makefile
> > > @@ -26,6 +26,7 @@ obj-$(CONFIG_VIDEO_AK7375) += ak7375.o
> > > obj-$(CONFIG_VIDEO_DW9714) += dw9714.o
> > > obj-$(CONFIG_VIDEO_DW9768) += dw9768.o
> > > obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o
> > > +obj-$(CONFIG_VIDEO_ADDI9036) += addi9036.o
> > > obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
> > > obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
> > > obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
> > > diff --git a/drivers/media/i2c/addi9036.c b/drivers/media/i2c/addi9036.c
> > > new file mode 100644
> > > index 000000000000..76c3444058dc
> > > --- /dev/null
> > > +++ b/drivers/media/i2c/addi9036.c
> > > @@ -0,0 +1,673 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Driver for the Analog Devices ADDI9036 ToF front-end.
> > > + *
> > > + * Copyright (C) 2019-2020 Analog Devices, All Rights Reserved.
> > > + *
> > > + */
> > > +
> > > +#include <linux/device.h>
> > > +#include <linux/gpio/consumer.h>
> > > +#include <linux/i2c.h>
> > > +#include <linux/init.h>
> > > +#include <linux/module.h>
> > > +#include <linux/mutex.h>
> > > +#include <linux/of.h>
> > > +#include <linux/of_graph.h>
> > > +#include <linux/regmap.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/types.h>
> > > +#include <linux/version.h>
> > > +#include <media/v4l2-ctrls.h>
> > > +#include <media/v4l2-fwnode.h>
> > > +#include <media/v4l2-subdev.h>
> > > +
> > > +struct addi9036_mode_info {
> > > + u32 width;
> > > + u32 height;
> > > + u32 pixel_rate;
> > > + u32 link_freq_idx;
> > > +};
> > > +
> > > +struct addi9036 {
> > > + struct regmap *regmap;
> > > + struct device *dev;
> > > + struct v4l2_subdev sd;
> > > + struct media_pad pad;
> > > + struct v4l2_fwnode_endpoint ep;
> > > + struct v4l2_mbus_framefmt fmt;
> > > + struct v4l2_rect crop;
> > > +
> > > + const struct addi9036_mode_info *current_mode;
> > > +
> > > + struct v4l2_ctrl_handler ctrls;
> > > + struct v4l2_ctrl *pixel_rate;
> > > + struct v4l2_ctrl *link_freq;
> > > +
> > > + /* lock to protect power state */
> > > + struct mutex power_lock;
> > > + int power_count;
> > > +
> > > + struct gpio_desc *rst_gpio;
> > > +
> > > + /* controls */
> > > + struct v4l2_ctrl *set_chip_config;
> > > + struct v4l2_ctrl *reg_read;
> > > +};
> > > +
> > > +static inline struct addi9036 *to_addi9036(struct v4l2_subdev *sd)
> > > +{
> > > + return container_of(sd, struct addi9036, sd);
> > > +}
> > > +
> > > +#define V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY (V4L2_CID_USER_ADDI9036_BASE + 0)
> > > +#define V4L2_CID_AD_DEV_REG_READ_QUERY (V4L2_CID_USER_ADDI9036_BASE + 1)
> > > +
> > > +static const struct reg_sequence addi9036_powerup_setting[] = {
> > > + { 0xc4c0, 0x001c },
> > > + { 0xc4c3, 0x001c },
> > > + { 0xc4d7, 0x0000 },
> > > + { 0xc4d5, 0x0002 },
> > > + { 0xc4da, 0x0001 },
> > > + { 0xc4f0, 0x0000 },
> > > + { 0xc427, 0x0003 },
> > > + { 0xc427, 0x0001 },
> > > + { 0xc427, 0x0000 },
> > > + { 0xc426, 0x0030 },
> > > + { 0xc426, 0x0010 },
> > > + { 0xc426, 0x0000 },
> > > + { 0xc423, 0x0080 },
> > > + { 0xc431, 0x0080 },
> > > + { 0x4001, 0x0007 },
> > > + { 0x7c22, 0x0004 }
> > > +};
> > > +
> > > +static const struct reg_sequence addi9036_powerdown_setting[] = {
> > > + { 0xc022, 0x0001 },
> > > + { 0x4001, 0x0006 },
> > > + { 0x7c22, 0x0004 },
> > > + { 0xc431, 0x0082 },
> > > + { 0xc423, 0x0000 },
> > > + { 0xc426, 0x0020 },
> > > + { 0xc427, 0x0002 },
> > > + { 0xc4c0, 0x003c },
> > > + { 0xc4c3, 0x003c },
> > > + { 0xc4d5, 0x0003 },
> > > + { 0xc4da, 0x0000 },
> > > + { 0xc4d7, 0x0001 },
> > > + { 0xc4f0, 0x0001 }
> > > +};
> > > +
> > > +static const s64 link_freq_tbl[] = {
> > > + 110529000,
> > > + 221184000,
> > > +};
> > > +
> > > +/* Elements of the structure must be ordered ascending by width & height */
> > > +static const struct addi9036_mode_info addi9036_mode_info_data[] = {
> > > + {
> > > + .width = 640,
> > > + .height = 480,
> > > + .pixel_rate = 36864000,
> > > + .link_freq_idx = 0 /* an index in link_freq_tbl[] */
> > > + },
> > > + {
> > > + .width = 640,
> > > + .height = 960,
> > > + .pixel_rate = 73728000,
> > > + .link_freq_idx = 1 /* an index in link_freq_tbl[] */
> > > + },
> > > +};
> > > +
> > > +static bool addi9306_readable_register(struct device *dev, unsigned int reg)
> > > +{
> > > + if (((reg >= 0x4000) && (reg <= 0x6FFF)) ||
> > > + ((reg >= 0x7C00) && (reg <= 0x7FFF)) ||
> > > + ((reg >= 0xC000) && (reg <= 0xC200)) ||
> > > + ((reg >= 0xC300) && (reg <= 0xC6BF)))
> > > + return true;
> > > + else
> > > + return false;
> > > +}
> > > +
> > > +static bool addi9306_writeable_register(struct device *dev, unsigned int reg)
> > > +{
> > > + if (((reg >= 0x4000) && (reg <= 0x6FFF)) ||
> > > + ((reg >= 0x7C00) && (reg <= 0x7FFF)) ||
> > > + ((reg >= 0xC000) && (reg <= 0xC113)) ||
> > > + ((reg >= 0xC300) && (reg <= 0xC7FF)))
> > > + return true;
> > > + else
> > > + return false;
> > > +}
> > > +
> > > +static const struct regmap_config addi9036_i2c_regmap_config = {
> > > + .reg_bits = 16,
> > > + .val_bits = 16,
> > > +
> > > + .max_register = 0xC7FF,
> > > + .writeable_reg = addi9306_writeable_register,
> > > + .readable_reg = addi9306_readable_register,
> > > + .cache_type = REGCACHE_NONE,
> > > +};
> > > +
> > > +static int addi9036_set_power_on(struct addi9036 *addi9036)
> > > +{
> > > + int ret;
> > > +
> > > + if (addi9036->rst_gpio)
> > > + gpiod_set_value_cansleep(addi9036->rst_gpio, 0);
> > > +
> > > + ret = regmap_register_patch(addi9036->regmap, addi9036_powerup_setting,
> > > + ARRAY_SIZE(addi9036_powerup_setting));
> > > + if (ret)
> > > + dev_err(addi9036->dev, "Could not set power up registers\n");
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int addi9036_set_power_off(struct addi9036 *addi9036)
> > > +{
> > > + int ret;
> > > +
> > > + ret = regmap_register_patch(addi9036->regmap,
> > > + addi9036_powerdown_setting,
> > > + ARRAY_SIZE(addi9036_powerdown_setting));
> > > + if (ret)
> > > + dev_err(addi9036->dev, "could not set power down registers\n");
> > > +
> > > + if (addi9036->rst_gpio)
> > > + gpiod_set_value_cansleep(addi9036->rst_gpio, 1);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int addi9036_s_power(struct v4l2_subdev *sd, int on)
> > > +{
> > > + struct addi9036 *addi9036 = to_addi9036(sd);
> > > + int ret = 0;
> > > +
> > > + mutex_lock(&addi9036->power_lock);
> > > +
> > > + dev_dbg(addi9036->dev, "s_power: %d\n", on);
> > > +
> > > + /* If the power count is modified from 0 to != 0 or from != 0 to 0,
> > > + * update the power state.
> > > + */
> > > + if (addi9036->power_count == !on) {
> > > + if (on)
> > > + ret = addi9036_set_power_on(addi9036);
> > > + else
> > > + ret = addi9036_set_power_off(addi9036);
> > > + }
> > > +
> > > + if (!ret) {
> > > + /* Update the power count. */
> > > + addi9036->power_count += on ? 1 : -1;
> > > + WARN(addi9036->power_count < 0, "Unbalanced power count\n");
> > > + WARN(addi9036->power_count > 1, "Duplicated s_power call\n");
> > > + }
> > > +
> > > + mutex_unlock(&addi9036->power_lock);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int addi9036_set_chip_config(struct addi9036 *addi9036,
> > > + struct v4l2_ctrl *ctrl)
> > > +{
> > > + int index;
> > > + unsigned short *reg, *val;
> > > +
> > > + reg = (unsigned short *)(ctrl->p_new.p_u16);
> > > + val = (unsigned short *)(ctrl->p_new.p_u16 + 1);
> > > +
> > > + for (index = 0; index < ctrl->elems; index += 2) {
> > > + regmap_write(addi9036->regmap, *reg, *val);
> > > + reg += 2;
> > > + val += 2;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int addi9036_s_ctrl(struct v4l2_ctrl *ctrl)
> > > +{
> > > + struct addi9036 *addi9036 = container_of(ctrl->handler,
> > > + struct addi9036, ctrls);
> > > + int ret = 0;
> > > + unsigned int val;
> > > +
> > > + switch (ctrl->id) {
> > > + case V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY:
> > > + ret = addi9036_set_chip_config(addi9036, ctrl);
> > > + break;
> > > + case V4L2_CID_AD_DEV_REG_READ_QUERY:
> > > + ret = regmap_read(addi9036->regmap, *(u16 *)(ctrl-
> > >p_new.p_u16),
> > > + &val);
> > > + if (ret)
> > > + dev_warn(addi9036->dev,
> > > + "could not read from register\n");
> > > + else
> > > + *(u16 *)(ctrl->p_new.p_u16) = val;
> > > + break;
> > > + case V4L2_CID_PIXEL_RATE:
> > > + case V4L2_CID_LINK_FREQ:
> > > + break;
> > > + default:
> > > + dev_err(addi9036->dev, "%s > Unhandled: %x param=%x\n",
> > > + __func__, ctrl->id, ctrl->val);
> > > + ret = -EINVAL;
> > > + break;
> > > + }
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static const struct v4l2_ctrl_ops addi9036_ctrl_ops = {
> > > + .s_ctrl = addi9036_s_ctrl,
> > > +};
> > > +
> > > +static const struct v4l2_ctrl_config addi9036_ctrl_chip_config = {
> > > + .ops = &addi9036_ctrl_ops,
> > > + .id = V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY,
> > > + .name = "chip_config",
> > > + .type = V4L2_CTRL_TYPE_U16,
> > > + .def = 0xFF,
> > > + .min = 0x00,
> > > + .max = 0xFFFF,
> > > + .step = 1,
> > > + .dims = { 2048 },
> > > + .elem_size = 2
> > > +};
> > > +
> > > +static const struct v4l2_ctrl_config addi9036_ctrl_reg_read = {
> > > + .ops = &addi9036_ctrl_ops,
> > > + .id = V4L2_CID_AD_DEV_REG_READ_QUERY,
> > > + .name = "reg_read",
> > > + .type = V4L2_CTRL_TYPE_U16,
> > > + .def = 0,
> > > + .min = 0x00,
> > > + .max = 0xFFFF,
> > > + .step = 1
> > > +};
> > > +
> > > +static int addi9036_enum_mbus_code(struct v4l2_subdev *sd,
> > > + struct v4l2_subdev_pad_config *cfg,
> > > + struct v4l2_subdev_mbus_code_enum *code)
> > > +{
> > > + if (code->index > 0)
> > > + return -EINVAL;
> > > +
> > > + code->code = MEDIA_BUS_FMT_SBGGR12_1X12;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int addi9036_enum_frame_size(struct v4l2_subdev *subdev,
> > > + struct v4l2_subdev_pad_config *cfg,
> > > + struct v4l2_subdev_frame_size_enum *fse)
> > > +{
> > > + if (fse->code != MEDIA_BUS_FMT_SBGGR12_1X12)
> > > + return -EINVAL;
> > > +
> > > + if (fse->index >= ARRAY_SIZE(addi9036_mode_info_data))
> > > + return -EINVAL;
> > > +
> > > + fse->min_width = addi9036_mode_info_data[fse->index].width;
> > > + fse->max_width = addi9036_mode_info_data[fse->index].width;
> > > + fse->min_height = addi9036_mode_info_data[fse->index].height;
> > > + fse->max_height = addi9036_mode_info_data[fse->index].height;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static struct v4l2_mbus_framefmt *
> > > +addi9036_get_pad_format(struct addi9036 *addi9036,
> > > + struct v4l2_subdev_pad_config *cfg,
> > > + unsigned int pad,
> > > + enum v4l2_subdev_format_whence which)
> > > +{
> > > + switch (which) {
> > > + case V4L2_SUBDEV_FORMAT_TRY:
> > > + return v4l2_subdev_get_try_format(&addi9036->sd, cfg, pad);
> > > + case V4L2_SUBDEV_FORMAT_ACTIVE:
> > > + return &addi9036->fmt;
> > > + default:
> > > + return NULL;
> > > + }
> > > +}
> > > +
> > > +static int addi9036_get_format(struct v4l2_subdev *sd,
> > > + struct v4l2_subdev_pad_config *cfg,
> > > + struct v4l2_subdev_format *format)
> > > +{
> > > + struct addi9036 *addi9036 = to_addi9036(sd);
> > > + struct v4l2_mbus_framefmt *pad_format;
> > > +
> > > + pad_format = addi9036_get_pad_format(addi9036, cfg, format->pad,
> > > + format->which);
> > > +
> > > + if (!pad_format)
> > > + return -EINVAL;
> > > +
> > > + format->format = *pad_format;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static struct v4l2_rect *
> > > +addi9036_get_pad_crop(struct addi9036 *addi9036,
> > > + struct v4l2_subdev_pad_config *cfg,
> > > + unsigned int pad, enum v4l2_subdev_format_whence which)
> > > +{
> > > + switch (which) {
> > > + case V4L2_SUBDEV_FORMAT_TRY:
> > > + return v4l2_subdev_get_try_crop(&addi9036->sd, cfg, pad);
> > > + case V4L2_SUBDEV_FORMAT_ACTIVE:
> > > + return &addi9036->crop;
> > > + default:
> > > + return NULL;
> > > + }
> > > +}
> > > +
> > > +static const struct addi9036_mode_info *
> > > +addi9036_find_nearest_mode(unsigned int width, unsigned int height)
> > > +{
> > > + unsigned int i;
> > > +
> > > + for (i = ARRAY_SIZE(addi9036_mode_info_data) - 1; i > 0; i--) {
> > > + if (addi9036_mode_info_data[i].width <= width &&
> > > + addi9036_mode_info_data[i].height <= height)
> > > + break;
> > > + }
> > > +
> > > + return &addi9036_mode_info_data[i];
> > > +}
> > > +
> > > +static int addi9036_set_format(struct v4l2_subdev *sd,
> > > + struct v4l2_subdev_pad_config *cfg,
> > > + struct v4l2_subdev_format *format)
> > > +{
> > > + struct addi9036 *addi9036 = to_addi9036(sd);
> > > + struct v4l2_mbus_framefmt *framefmt;
> > > + struct v4l2_rect *crop;
> > > + const struct addi9036_mode_info *new_mode;
> > > + int ret;
> > > +
> > > + dev_dbg(addi9036->dev, "set_fmt: %x %dx%d\n",
> > > + format->format.code, format->format.width,
> > > + format->format.height);
> > > +
> > > + crop = addi9036_get_pad_crop(addi9036, cfg, format->pad,
> > > + format->which);
> > > +
> > > + if (!crop)
> > > + return -EINVAL;
> > > +
> > > + new_mode = addi9036_find_nearest_mode(format->format.width,
> > > + format->format.height);
> > > + crop->width = new_mode->width;
> > > + crop->height = new_mode->height;
> > > +
> > > + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > > + ret = v4l2_ctrl_s_ctrl_int64(addi9036->pixel_rate,
> > > + new_mode->pixel_rate);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + ret = v4l2_ctrl_s_ctrl(addi9036->link_freq,
> > > + new_mode->link_freq_idx);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + addi9036->current_mode = new_mode;
> > > + }
> > > +
> > > + framefmt = addi9036_get_pad_format(addi9036, cfg, format->pad,
> > > + format->which);
> > > +
> > > + if (!framefmt)
> > > + return -EINVAL;
> > > +
> > > + framefmt->width = crop->width;
> > > + framefmt->height = crop->height;
> > > + framefmt->code = MEDIA_BUS_FMT_SBGGR12_1X12;
> > > + framefmt->field = V4L2_FIELD_NONE;
> > > + framefmt->colorspace = V4L2_COLORSPACE_SRGB;
> > > +
> > > + format->format = *framefmt;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int addi9036_entity_init_cfg(struct v4l2_subdev *subdev,
> > > + struct v4l2_subdev_pad_config *cfg)
> > > +{
> > > + struct v4l2_subdev_format fmt = { 0 };
> > > +
> > > + if (cfg)
> > > + fmt.which = V4L2_SUBDEV_FORMAT_TRY;
> > > + else
> > > + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > > +
> > > + fmt.format.width = 640;
> > > + fmt.format.height = 960;
> > > +
> > > + addi9036_set_format(subdev, cfg, &fmt);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int addi9036_get_selection(struct v4l2_subdev *sd,
> > > + struct v4l2_subdev_pad_config *cfg,
> > > + struct v4l2_subdev_selection *sel)
> > > +{
> > > + struct addi9036 *addi9036 = to_addi9036(sd);
> > > +
> > > + if (sel->target != V4L2_SEL_TGT_CROP)
> > > + return -EINVAL;
> > > +
> > > + sel->r = *addi9036_get_pad_crop(addi9036, cfg, sel->pad, sel->which);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int addi9036_s_stream(struct v4l2_subdev *subdev, int enable)
> > > +{
> > > + struct addi9036 *addi9036 = to_addi9036(subdev);
> > > +
> > > + dev_dbg(addi9036->dev, "stream %d\n", enable);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct v4l2_subdev_core_ops addi9036_core_ops = {
> > > + .s_power = addi9036_s_power,
> > > +};
> > > +
> > > +static const struct v4l2_subdev_video_ops addi9036_video_ops = {
> > > + .s_stream = addi9036_s_stream,
> > > +};
> > > +
> > > +static const struct v4l2_subdev_pad_ops addi9036_subdev_pad_ops = {
> > > + .init_cfg = addi9036_entity_init_cfg,
> > > + .enum_mbus_code = addi9036_enum_mbus_code,
> > > + .enum_frame_size = addi9036_enum_frame_size,
> > > + .get_fmt = addi9036_get_format,
> > > + .set_fmt = addi9036_set_format,
> > > + .get_selection = addi9036_get_selection,
> > > +};
> > > +
> > > +static const struct v4l2_subdev_ops addi9036_subdev_ops = {
> > > + .core = &addi9036_core_ops,
> > > + .video = &addi9036_video_ops,
> > > + .pad = &addi9036_subdev_pad_ops,
> > > +};
> > > +
> > > +static int addi9036_probe(struct i2c_client *client)
> > > +{
> > > + struct device *dev = &client->dev;
> > > + struct fwnode_handle *endpoint;
> > > + struct addi9036 *addi9036;
> > > + int ret;
> > > +
> > > + dev_dbg(dev, "%s: i2c addr = 0x%x\n", __func__, client->addr);
> > > +
> > > + addi9036 = devm_kzalloc(dev, sizeof(struct addi9036), GFP_KERNEL);
> > > + if (!addi9036)
> > > + return -ENOMEM;
> > > +
> > > + addi9036->dev = dev;
> > > +
> > > + addi9036->regmap = devm_regmap_init_i2c(client,
> > > + &addi9036_i2c_regmap_config);
> > > + if (IS_ERR(addi9036->regmap)) {
> > > + dev_err(dev, "Error initializing i2c regmap\n");
> > > + return PTR_ERR(addi9036->regmap);
> > > + }
> > > +
> > > + mutex_init(&addi9036->power_lock);
> > > +
> > > + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> > > + if (!endpoint) {
> > > + dev_err(dev, "endpoint node not found\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + ret = v4l2_fwnode_endpoint_parse(endpoint, &addi9036->ep);
> > > + if (ret < 0) {
> > > + dev_err(dev, "parsing endpoint node failed\n");
> > > + return ret;
> > > + }
> > > + fwnode_handle_put(endpoint);
> > > +
> > > + if (addi9036->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
> > > + dev_err(dev, "invalid bus type, must be MIPI CSI2\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + addi9036->rst_gpio = gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> > > + if (IS_ERR(addi9036->rst_gpio)) {
> > > + dev_info(dev, "Unable to get \"reset\" gpio\n");
> > > + return PTR_ERR(addi9036->rst_gpio);
> > > + }
> > > +
> > > + v4l2_ctrl_handler_init(&addi9036->ctrls, 4);
> > > +
> > > + addi9036->pixel_rate = v4l2_ctrl_new_std(&addi9036->ctrls,
> > > + &addi9036_ctrl_ops,
> > > + V4L2_CID_PIXEL_RATE,
> > > + 1, INT_MAX, 1, 1);
> > > + addi9036->link_freq = v4l2_ctrl_new_int_menu(&addi9036->ctrls,
> > > + &addi9036_ctrl_ops,
> > > + V4L2_CID_LINK_FREQ,
> > > + ARRAY_SIZE(
> > > + link_freq_tbl) - 1,
> > > + 0, link_freq_tbl);
> > > + if (addi9036->link_freq)
> > > + addi9036->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > > +
> > > + addi9036->set_chip_config = v4l2_ctrl_new_custom(&addi9036->ctrls,
> > > + &addi9036_ctrl_chip_config,
> > > + NULL);
> > > +
> > > + addi9036->reg_read = v4l2_ctrl_new_custom(&addi9036->ctrls,
> > > + &addi9036_ctrl_reg_read,
> > > + NULL);
> > > +
> > > + addi9036->sd.ctrl_handler = &addi9036->ctrls;
> > > +
> > > + if (addi9036->ctrls.error) {
> > > + dev_err(dev, "%s: control initialization error %d\n",
> > > + __func__, addi9036->ctrls.error);
> > > + ret = addi9036->ctrls.error;
> > > + goto free_ctrl;
> > > + }
> > > +
> > > + v4l2_i2c_subdev_init(&addi9036->sd, client, &addi9036_subdev_ops);
> > > + addi9036->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > > + addi9036->pad.flags = MEDIA_PAD_FL_SOURCE;
> > > + addi9036->sd.dev = &client->dev;
> > > + addi9036->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > > +
> > > + ret = media_entity_pads_init(&addi9036->sd.entity, 1, &addi9036->pad);
> > > +
> > > + if (ret < 0) {
> > > + dev_err(dev, "could not register media entity\n");
> > > + goto free_ctrl;
> > > + }
> > > +
> > > + ret = addi9036_s_power(&addi9036->sd, true);
> > > + if (ret < 0) {
> > > + dev_err(dev, "could not power up addi9036\n");
> > > + goto free_entity;
> > > + }
> > > +
> > > + dev_info(dev, "addi9036 detected at address 0x%02x\n", client->addr);
> > > +
> > > + ret = addi9036_s_power(&addi9036->sd, false);
> > > + if (ret < 0) {
> > > + dev_err(dev, "could not power down addi9036\n");
> > > + goto free_entity;
> > > + }
> > > +
> > > + addi9036_entity_init_cfg(&addi9036->sd, NULL);
> > > +
> > > + ret = v4l2_async_register_subdev(&addi9036->sd);
> > > + if (ret < 0)
> > > + dev_err(dev, "could not register v4l2 device\n");
> > > +
> > > + return 0;
> > > +
> > > +free_entity:
> > > + media_entity_cleanup(&addi9036->sd.entity);
> > > +free_ctrl:
> > > + v4l2_ctrl_handler_free(&addi9036->ctrls);
> > > + mutex_destroy(&addi9036->power_lock);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int addi9036_remove(struct i2c_client *client)
> > > +{
> > > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > > + struct addi9036 *addi9036 = to_addi9036(sd);
> > > +
> > > + v4l2_async_unregister_subdev(&addi9036->sd);
> > > + media_entity_cleanup(&addi9036->sd.entity);
> > > + if (addi9036->rst_gpio)
> > > + gpiod_put(addi9036->rst_gpio);
> > > + v4l2_ctrl_handler_free(&addi9036->ctrls);
> > > + mutex_destroy(&addi9036->power_lock);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct i2c_device_id addi9036_id[] = {
> > > + { "addi9036", 0 },
> > > + {}
> > > +};
> > > +MODULE_DEVICE_TABLE(i2c, addi9036_id);
> > > +
> > > +static const struct of_device_id addi9036_of_match[] = {
> > > + { .compatible = "adi,addi9036" },
> > > + { /* sentinel */ }
> > > +};
> > > +MODULE_DEVICE_TABLE(of, addi9036_of_match);
> > > +
> > > +static struct i2c_driver addi9036_i2c_driver = {
> > > + .driver = {
> > > + .of_match_table = addi9036_of_match,
> > > + .name = "addi9036",
> > > + },
> > > + .probe_new = addi9036_probe,
> > > + .remove = addi9036_remove,
> > > + .id_table = addi9036_id,
> > > +};
> > > +
> > > +module_i2c_driver(addi9036_i2c_driver);
> > > +
> > > +MODULE_DESCRIPTION("Analog Devices ADDI9036 Camera Driver");
> > > +MODULE_AUTHOR("Bogdan Togorean");
> > > +MODULE_LICENSE("GPL v2");
> > > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2- controls.h
> > > index 62271418c1be..f88b56479bc1 100644
> > > --- a/include/uapi/linux/v4l2-controls.h
> > > +++ b/include/uapi/linux/v4l2-controls.h
> > > @@ -198,6 +198,12 @@ enum v4l2_colorfx {
> > > */
> > > #define V4L2_CID_USER_ATMEL_ISC_BASE (V4L2_CID_USER_BASE + 0x10c0)
> > >
> > > +/*
> > > + * The base for the addi9036 driver controls.
> > > + * We reserve 16 controls for this driver.
> > > + */
> > > +#define V4L2_CID_USER_ADDI9036_BASE (V4L2_CID_USER_BASE + 0x10e0)
> > > +
> > > /* MPEG-class control IDs */
> > > /* The MPEG controls are applicable to all codec controls
> > > * and the 'MPEG' part of the define is historical */

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2020-09-15 23:26    [W:0.096 / U:19.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site