lkml.org 
[lkml]   [2020]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 17/19] spi: Fix memory leak on splited transfers
Date
From: Gustav Wiklander <gustavwi@axis.com>

[ Upstream commit b59a7ca15464c78ea1ba3b280cfc5ac5ece11ade ]

In the prepare_message callback the bus driver has the
opportunity to split a transfer into smaller chunks.
spi_map_msg is done after prepare_message.

Function spi_res_release releases the splited transfers
in the message. Therefore spi_res_release should be called
after spi_map_msg.

The previous try at this was commit c9ba7a16d0f1
which released the splited transfers after
spi_finalize_current_message had been called.
This introduced a race since the message struct could be
out of scope because the spi_sync call got completed.

Fixes this leak on spi bus driver spi-bcm2835.c when transfer
size is greater than 65532:

Kmemleak:
sg_alloc_table+0x28/0xc8
spi_map_buf+0xa4/0x300
__spi_pump_messages+0x370/0x748
__spi_sync+0x1d4/0x270
spi_sync+0x34/0x58
spi_test_execute_msg+0x60/0x340 [spi_loopback_test]
spi_test_run_iter+0x548/0x578 [spi_loopback_test]
spi_test_run_test+0x94/0x140 [spi_loopback_test]
spi_test_run_tests+0x150/0x180 [spi_loopback_test]
spi_loopback_test_probe+0x50/0xd0 [spi_loopback_test]
spi_drv_probe+0x84/0xe0

Signed-off-by: Gustav Wiklander <gustavwi@axis.com>
Link: https://lore.kernel.org/r/20200908151129.15915-1-gustav.wiklander@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 92e6b6774d98e..1fd529a2d2f6b 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1116,8 +1116,6 @@ static int spi_transfer_one_message(struct spi_controller *ctlr,
if (msg->status && ctlr->handle_err)
ctlr->handle_err(ctlr, msg);

- spi_res_release(ctlr, msg);
-
spi_finalize_current_message(ctlr);

return ret;
@@ -1375,6 +1373,13 @@ void spi_finalize_current_message(struct spi_controller *ctlr)

spi_unmap_msg(ctlr, mesg);

+ /* In the prepare_messages callback the spi bus has the opportunity to
+ * split a transfer to smaller chunks.
+ * Release splited transfers here since spi_map_msg is done on the
+ * splited transfers.
+ */
+ spi_res_release(ctlr, mesg);
+
if (ctlr->cur_msg_prepared && ctlr->unprepare_message) {
ret = ctlr->unprepare_message(ctlr, mesg);
if (ret) {
--
2.25.1
\
 
 \ /
  Last update: 2020-09-14 16:28    [W:0.074 / U:1.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site