lkml.org 
[lkml]   [2020]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V6 0/4] Add wakeup support over UART RX
Date
Changes in V2:
- As per Matthias's comment added wakeup support for all the UARTs
of SC7180.
- Added sleep state in sc7180-idp.dts file.
- Modify the if check in set_mctrl API in serial driver to avoid
making RFR high during suspend.

Changes in V3:
- As per Matthias's comments modify the idp dts pin config to keep
only the required pin settings.
- Remove the extra parentheses from serial driver patch.

Changes in V4:
- As per Matthias's comments, change the commit text to mention why
GPIO function needs to be selected in sleep.
- Add separate patch for improvements made in pin conf settings.

Changes in V5:
- Moved pinctrl and interrupt configuration to board specific files.
- Added new patch for trogdor board specific changes.

Changes in V6:
- As per Doug's comments, fixed nits in patch 2 and 3.
- As per Bjorn's comments changed the commit text and rationale for
rts, tx and rx in patch 2 and 3.

satya priya (4):
arm64: dts: qcom: sc7180: Improve the uart3 pin config for sc7180-idp
arm64: dts: qcom: sc7180: Add wakeup support for BT UART on sc7180-idp
arm64: dts: qcom: sc7180-trogdor: Add wakeup support for BT UART
tty: serial: qcom_geni_serial: Fix the UART wakeup issue

arch/arm64/boot/dts/qcom/sc7180-idp.dts | 65 +++++++++++++++++++++++++---
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 54 +++++++++++++++++++++++
drivers/tty/serial/qcom_geni_serial.c | 2 +-
3 files changed, 114 insertions(+), 7 deletions(-)

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2020-09-14 16:02    [W:0.071 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site