lkml.org 
[lkml]   [2020]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/7] PCI: layerscape: Add power management support
On Mon, Sep 07, 2020 at 01:38:01PM +0800, Zhiqiang Hou wrote:
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
>
> Add PME_Turn_Off/PME_TO_Ack handshake sequence, and finally
> put the PCIe controller into D3 state after the L2/L3 ready
> state transition process completion.
>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> ---
> drivers/pci/controller/dwc/pci-layerscape.c | 384 ++++++++++++++++++-
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 383 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index be404c16bcbe..ca9ea07f77c1 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -3,13 +3,16 @@
> * PCIe host controller driver for Freescale Layerscape SoCs
> *
> * Copyright (C) 2014 Freescale Semiconductor.
> + * Copyright 2020 NXP
> *
> * Author: Minghuan Lian <Minghuan.Lian@freescale.com>
> */
>
> +#include <linux/delay.h>
> #include <linux/kernel.h>
> #include <linux/interrupt.h>
> #include <linux/init.h>
> +#include <linux/iopoll.h>
> #include <linux/of_pci.h>
> #include <linux/of_platform.h>
> #include <linux/of_irq.h>
> @@ -27,17 +30,66 @@
> #define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response Register */
> #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted request */
>
> +#define PCIE_PM_SCR 0x44
> +#define PCIE_PM_SCR_PMEPS_D0 0x0
> +#define PCIE_PM_SCR_PMEPS_D3 0x3
> +
> +#define PCIE_LNKCTL 0x80 /* PCIe link ctrl Register */

Use the common defines.


> +
> +/* PF Message Command Register */
> +#define LS_PCIE_PF_MCR 0x2c
> +#define PF_MCR_PTOMR BIT(0)
> +#define PF_MCR_EXL2S BIT(1)
> +
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx) (0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF BIT(31)
> +#define SCFG_PEXSFTRSTCR 0x190
> +#define PEXSR(idx) BIT(idx)
> +
> +/* LS1043A PEX PME control register */
> +#define SCFG_PEXPMECR 0x144
> +#define PEXPME(idx) BIT(31 - (idx) * 4)
> +
> +/* LS1043A PEX LUT debug register */
> +#define LS_PCIE_LDBG 0x7fc
> +#define LDBG_SR BIT(30)
> +#define LDBG_WE BIT(31)
> +
> #define PCIE_IATU_NUM 6
>
> +#define LS_PCIE_IS_L2(v) \
> + (((v) & PORT_LOGIC_LTSSM_STATE_MASK) == PORT_LOGIC_LTSSM_STATE_L2)
> +
> +struct ls_pcie;
> +
> +struct ls_pcie_host_pm_ops {
> + int (*pm_init)(struct ls_pcie *pcie);
> + void (*send_turn_off_message)(struct ls_pcie *pcie);
> + void (*exit_from_l2)(struct ls_pcie *pcie);
> +};
> +
> struct ls_pcie_drvdata {
> + const u32 pf_off;
> + const u32 lut_off;
> const struct dw_pcie_host_ops *ops;
> + const struct ls_pcie_host_pm_ops *pm_ops;
> };
>
> struct ls_pcie {
> struct dw_pcie *pci;
> const struct ls_pcie_drvdata *drvdata;
> + void __iomem *pf_base;
> + void __iomem *lut_base;
> + bool big_endian;
> + bool ep_presence;
> + bool pm_support;
> + struct regmap *scfg;
> + int index;
> };
>
> +#define ls_pcie_lut_readl_addr(addr) ls_pcie_lut_readl(pcie, addr)
> +#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr)
> #define to_ls_pcie(x) dev_get_drvdata((x)->dev)
>
> static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> @@ -86,6 +138,208 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
> iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
> }
>
> +static u32 ls_pcie_lut_readl(struct ls_pcie *pcie, u32 off)
> +{
> + if (pcie->big_endian)
> + return ioread32be(pcie->lut_base + off);
> +
> + return ioread32(pcie->lut_base + off);
> +}
> +
> +static void ls_pcie_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
> +{
> + if (pcie->big_endian)
> + return iowrite32be(val, pcie->lut_base + off);
> +
> + return iowrite32(val, pcie->lut_base + off);
> +
> +}
> +
> +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> +{
> + if (pcie->big_endian)
> + return ioread32be(pcie->pf_base + off);
> +
> + return ioread32(pcie->pf_base + off);
> +}
> +
> +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> +{
> + if (pcie->big_endian)
> + return iowrite32be(val, pcie->pf_base + off);
> +
> + return iowrite32(val, pcie->pf_base + off);
> +
> +}
> +
> +static void ls_pcie_send_turnoff_msg(struct ls_pcie *pcie)
> +{
> + u32 val;
> + int ret;
> +
> + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> + val |= PF_MCR_PTOMR;
> + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +
> + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> + val, !(val & PF_MCR_PTOMR), 100, 10000);
> + if (ret)
> + dev_info(pcie->pci->dev, "poll turn off message timeout\n");
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct ls_pcie *pcie)
> +{
> + u32 val;
> +
> + if (!pcie->scfg) {
> + dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> + return;
> + }
> +
> + /* Send Turn_off message */
> + regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> + val |= PMXMTTURNOFF;
> + regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> +
> + mdelay(10);
> +
> + /* Clear Turn_off message */
> + regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> + val &= ~PMXMTTURNOFF;
> + regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> +}
> +
> +static void ls1043a_pcie_send_turnoff_msg(struct ls_pcie *pcie)
> +{
> + u32 val;
> +
> + if (!pcie->scfg) {
> + dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> + return;
> + }
> +
> + /* Send Turn_off message */
> + regmap_read(pcie->scfg, SCFG_PEXPMECR, &val);
> + val |= PEXPME(pcie->index);
> + regmap_write(pcie->scfg, SCFG_PEXPMECR, val);
> +
> + mdelay(10);
> +
> + /* Clear Turn_off message */
> + regmap_read(pcie->scfg, SCFG_PEXPMECR, &val);
> + val &= ~PEXPME(pcie->index);
> + regmap_write(pcie->scfg, SCFG_PEXPMECR, val);
> +}
> +
> +static void ls_pcie_exit_from_l2(struct ls_pcie *pcie)
> +{
> + u32 val;
> + int ret;
> +
> + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> + val |= PF_MCR_EXL2S;
> + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +
> + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> + val, !(val & PF_MCR_EXL2S), 100, 10000);
> + if (ret)
> + dev_info(pcie->pci->dev, "poll exit L2 state timeout\n");
> +}
> +
> +static void ls_pcie_retrain_link(struct ls_pcie *pcie)
> +{
> + struct dw_pcie *pci = pcie->pci;
> + u32 val;
> +
> + val = dw_pcie_readw_dbi(pci, PCIE_LNKCTL);
> + val |= PCI_EXP_LNKCTL_RL;
> + dw_pcie_writew_dbi(pci, PCIE_LNKCTL, val);
> +}
> +
> +static void ls1021a_pcie_exit_from_l2(struct ls_pcie *pcie)
> +{
> + u32 val;
> +
> + regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> + val |= PEXSR(pcie->index);
> + regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> +
> + regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> + val &= ~PEXSR(pcie->index);
> + regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> +
> + mdelay(1);
> +
> + ls_pcie_retrain_link(pcie);
> +}
> +static void ls1043a_pcie_exit_from_l2(struct ls_pcie *pcie)
> +{
> + u32 val;
> +
> + val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> + val |= LDBG_WE;
> + ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> + val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> + val |= LDBG_SR;
> + ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> + val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> + val &= ~LDBG_SR;
> + ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> + val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> + val &= ~LDBG_WE;
> + ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> + mdelay(1);
> +
> + ls_pcie_retrain_link(pcie);
> +}
> +
> +static int ls1021a_pcie_pm_init(struct ls_pcie *pcie)
> +{
> + struct device *dev = pcie->pci->dev;
> + u32 index[2];
> + int ret;
> +
> + pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "fsl,pcie-scfg");
> + if (IS_ERR(pcie->scfg)) {
> + ret = PTR_ERR(pcie->scfg);
> + dev_err(dev, "No syscfg phandle specified\n");
> + pcie->scfg = NULL;
> + return ret;
> + }
> +
> + ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg",
> + index, 2);
> + if (ret) {
> + pcie->scfg = NULL;
> + return ret;
> + }
> +
> + pcie->index = index[1];
> +
> + return 0;
> +}
> +
> +static int ls_pcie_pm_init(struct ls_pcie *pcie)
> +{
> + return 0;
> +}
> +
> +static void ls_pcie_set_dstate(struct ls_pcie *pcie, u32 dstate)
> +{
> + struct dw_pcie *pci = pcie->pci;
> + u32 val;
> +
> + val = dw_pcie_readw_dbi(pci, PCIE_PM_SCR);
> + val &= ~PCI_PM_CTRL_STATE_MASK;
> + val |= dstate;
> + dw_pcie_writew_dbi(pci, PCIE_PM_SCR, val);
> +}
> +
> static int ls_pcie_host_init(struct pcie_port *pp)
> {
> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> @@ -133,20 +387,52 @@ static int ls_pcie_msi_host_init(struct pcie_port *pp)
> return 0;
> }
>
> +static struct ls_pcie_host_pm_ops ls1021a_pcie_host_pm_ops = {
> + .pm_init = &ls1021a_pcie_pm_init,
> + .send_turn_off_message = &ls1021a_pcie_send_turnoff_msg,
> + .exit_from_l2 = &ls1021a_pcie_exit_from_l2,
> +};
> +
> +static struct ls_pcie_host_pm_ops ls1043a_pcie_host_pm_ops = {
> + .pm_init = &ls1021a_pcie_pm_init,
> + .send_turn_off_message = &ls1043a_pcie_send_turnoff_msg,
> + .exit_from_l2 = &ls1043a_pcie_exit_from_l2,
> +};
> +
> +static struct ls_pcie_host_pm_ops ls_pcie_host_pm_ops = {
> + .pm_init = &ls_pcie_pm_init,
> + .send_turn_off_message = &ls_pcie_send_turnoff_msg,
> + .exit_from_l2 = &ls_pcie_exit_from_l2,
> +};
> +
> static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> .host_init = ls_pcie_host_init,
> .msi_host_init = ls_pcie_msi_host_init,
> };
>
> +static const struct ls_pcie_drvdata ls1021a_drvdata = {
> + .ops = &ls_pcie_host_ops,
> + .pm_ops = &ls1021a_pcie_host_pm_ops,
> +};
> +
> +static const struct ls_pcie_drvdata ls1043a_drvdata = {
> + .ops = &ls_pcie_host_ops,
> + .lut_off = 0x10000,
> + .pm_ops = &ls1043a_pcie_host_pm_ops,
> +};
> +
> static const struct ls_pcie_drvdata layerscape_drvdata = {
> .ops = &ls_pcie_host_ops,
> + .lut_off = 0x80000,
> + .pf_off = 0xc0000,
> + .pm_ops = &ls_pcie_host_pm_ops,
> };
>
> static const struct of_device_id ls_pcie_of_match[] = {
> { .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
> - { .compatible = "fsl,ls1021a-pcie", .data = &layerscape_drvdata },
> + { .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
> { .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> - { .compatible = "fsl,ls1043a-pcie", .data = &layerscape_drvdata },
> + { .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
> { .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
> { .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
> { .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> @@ -170,6 +456,15 @@ static int __init ls_add_pcie_port(struct ls_pcie *pcie)
> return ret;
> }
>
> + if (dw_pcie_link_up(pci)) {
> + dev_dbg(pci->dev, "Endpoint is present\n");
> + pcie->ep_presence = true;
> + }
> +
> + if (pcie->drvdata->pm_ops && pcie->drvdata->pm_ops->pm_init &&
> + !pcie->drvdata->pm_ops->pm_init(pcie))
> + pcie->pm_support = true;
> +
> return 0;
> }
>
> @@ -200,6 +495,14 @@ static int __init ls_pcie_probe(struct platform_device *pdev)
> if (IS_ERR(pci->dbi_base))
> return PTR_ERR(pci->dbi_base);
>
> + pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
> +
> + if (pcie->drvdata->lut_off)
> + pcie->lut_base = pci->dbi_base + pcie->drvdata->lut_off;
> +
> + if (pcie->drvdata->pf_off)
> + pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> +
> if (!ls_pcie_is_bridge(pcie))
> return -ENODEV;
>
> @@ -212,11 +515,88 @@ static int __init ls_pcie_probe(struct platform_device *pdev)
> return 0;
> }
>
> +static bool ls_pcie_pm_check(struct ls_pcie *pcie)
> +{
> + if (!pcie->ep_presence) {
> + dev_dbg(pcie->pci->dev, "Endpoint isn't present\n");
> + return false;
> + }
> +
> + if (!pcie->pm_support)
> + return false;
> +
> + return true;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int ls_pcie_suspend_noirq(struct device *dev)

Why is noirq variant needed? Most drivers don't need this.

> +{
> + struct ls_pcie *pcie = dev_get_drvdata(dev);
> + struct dw_pcie *pci = pcie->pci;
> + u32 val;
> + int ret;
> +
> + if (!ls_pcie_pm_check(pcie))
> + return 0;
> +
> + pcie->drvdata->pm_ops->send_turn_off_message(pcie);
> +
> + /* 10ms timeout to check L2 ready */
> + ret = readl_poll_timeout(pci->dbi_base + PCIE_PORT_DEBUG0,
> + val, LS_PCIE_IS_L2(val), 100, 10000);
> + if (ret) {
> + dev_err(dev, "PCIe link enter L2 timeout! ltssm = 0x%x\n", val);
> + return ret;
> + }
> +
> + ls_pcie_set_dstate(pcie, PCIE_PM_SCR_PMEPS_D3);
> +
> + return 0;
> +}
> +
> +static int ls_pcie_resume_noirq(struct device *dev)
> +{
> + struct ls_pcie *pcie = dev_get_drvdata(dev);
> + struct dw_pcie *pci = pcie->pci;
> + int ret;
> +
> + if (!ls_pcie_pm_check(pcie))
> + return 0;
> +
> + ls_pcie_set_dstate(pcie, PCIE_PM_SCR_PMEPS_D0);
> +
> + pcie->drvdata->pm_ops->exit_from_l2(pcie);
> +
> + /* delay 10ms to access EP */
> + mdelay(10);
> +
> + ret = ls_pcie_host_init(&pci->pp);
> + if (ret) {
> + dev_err(dev, "ls_pcie_host_init failed! ret = 0x%x\n", ret);
> + return ret;
> + }
> +
> + ret = dw_pcie_wait_for_link(pci);
> + if (ret) {
> + dev_err(dev, "wait link up timeout! ret = 0x%x\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static const struct dev_pm_ops ls_pcie_pm_ops = {
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq,
> + ls_pcie_resume_noirq)
> +};
> +
> static struct platform_driver ls_pcie_driver = {
> .driver = {
> .name = "layerscape-pcie",
> .of_match_table = ls_pcie_of_match,
> .suppress_bind_attrs = true,
> + .pm = &ls_pcie_pm_ops,
> },
> };
> builtin_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index f911760dcc69..1f2fd03d1eba 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -46,6 +46,7 @@
> #define PCIE_PORT_DEBUG0 0x728
> #define PORT_LOGIC_LTSSM_STATE_MASK 0x1f
> #define PORT_LOGIC_LTSSM_STATE_L0 0x11
> +#define PORT_LOGIC_LTSSM_STATE_L2 0x15
> #define PCIE_PORT_DEBUG1 0x72C
> #define PCIE_PORT_DEBUG1_LINK_UP BIT(4)
> #define PCIE_PORT_DEBUG1_LINK_IN_TRAINING BIT(29)
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-09-15 03:30    [W:0.208 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site