lkml.org 
[lkml]   [2020]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs
From
Date
Quoting Taniya Das (2020-09-08 10:07:26)
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index 26139ef..fb27fcf 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -1561,3 +1571,75 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
> .set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
> };
> EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
> +
> +void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> + const struct alpha_pll_config *config)
> +{
> + if (config->l)
> + regmap_write(regmap, PLL_L_VAL(pll), config->l);
> +
> + if (config->alpha)
> + regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
> +
> + if (config->user_ctl_val)
> + regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
> +
> + if (config->config_ctl_val)
> + regmap_write(regmap, PLL_CONFIG_CTL(pll),
> + config->config_ctl_val);
> +
> + if (config->config_ctl_hi_val)
> + regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
> + config->config_ctl_hi_val);
> +
> + if (config->test_ctl_val)
> + regmap_write(regmap, PLL_TEST_CTL(pll),
> + config->test_ctl_val);
> +
> + if (config->test_ctl_hi_val)
> + regmap_write(regmap, PLL_TEST_CTL_U(pll),
> + config->test_ctl_hi_val);
> +}
> +EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
> +
> +static int alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,

Why not clk_alpha_pll prefix? We should prefix the other PLL functions
in here with clk_alpha_ like trion and fabia

> + unsigned long prate)
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + u32 l, alpha_width = pll_alpha_width(pll);
> + unsigned long rrate;
> + u64 a;
> +
> + rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
> +
> + /*
> + * Due to limited number of bits for fractional rate programming, the
> + * rounded up rate could be marginally higher than the requested rate.
> + */
> + if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
> + pr_err("Call set rate on the PLL with rounded rates!\n");
> + return -EINVAL;
> + }

See commit f78f29079327 ("clk: qcom: alpha-pll: Make error prints more
informative") where I tried to make this better. Can you extract this
check into a function that helps us understand the error better?

> +
> + /* change L_VAL without having to go through the power on sequence */
> + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
> + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
> +
> + /* Ensure that the write above goes through before proceeding. */
> + mb();

regmap has an mb() in it. Remove this?

> +
> + if (clk_hw_is_enabled(hw))
> + return wait_for_pll_enable_lock(pll);
> +
> + return 0;
> +}
> +
> +const struct clk_ops clk_alpha_pll_agera_ops = {
> + .enable = clk_alpha_pll_enable,
> + .disable = clk_alpha_pll_disable,
> + .is_enabled = clk_alpha_pll_is_enabled,
> + .recalc_rate = alpha_pll_fabia_recalc_rate,
> + .round_rate = clk_alpha_pll_round_rate,
> + .set_rate = alpha_pll_agera_set_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);

\
 
 \ /
  Last update: 2020-09-15 02:15    [W:0.159 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site