lkml.org 
[lkml]   [2020]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 01/23] dt-bindings: iommu: mediatek: Convert IOMMU to DT schema
On Sat, Sep 05, 2020 at 04:08:58PM +0800, Yong Wu wrote:
> Convert MediaTek IOMMU to DT schema.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../bindings/iommu/mediatek,iommu.txt | 103 ------------
> .../bindings/iommu/mediatek,iommu.yaml | 150 ++++++++++++++++++
> 2 files changed, 150 insertions(+), 103 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> create mode 100644 Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
>
> diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> deleted file mode 100644
> index c1ccd8582eb2..000000000000
> --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> +++ /dev/null
> @@ -1,103 +0,0 @@
> -* Mediatek IOMMU Architecture Implementation
> -
> - Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U), and
> -this M4U have two generations of HW architecture. Generation one uses flat
> -pagetable, and only supports 4K size page mapping. Generation two uses the
> -ARM Short-Descriptor translation table format for address translation.
> -
> - About the M4U Hardware Block Diagram, please check below:
> -
> - EMI (External Memory Interface)
> - |
> - m4u (Multimedia Memory Management Unit)
> - |
> - +--------+
> - | |
> - gals0-rx gals1-rx (Global Async Local Sync rx)
> - | |
> - | |
> - gals0-tx gals1-tx (Global Async Local Sync tx)
> - | | Some SoCs may have GALS.
> - +--------+
> - |
> - SMI Common(Smart Multimedia Interface Common)
> - |
> - +----------------+-------
> - | |
> - | gals-rx There may be GALS in some larbs.
> - | |
> - | |
> - | gals-tx
> - | |
> - SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb).
> - (display) (vdec)
> - | |
> - | |
> - +-----+-----+ +----+----+
> - | | | | | |
> - | | |... | | | ... There are different ports in each larb.
> - | | | | | |
> -OVL0 RDMA0 WDMA0 MC PP VLD
> -
> - As above, The Multimedia HW will go through SMI and M4U while it
> -access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
> -smi local arbiter and smi common. It will control whether the Multimedia
> -HW should go though the m4u for translation or bypass it and talk
> -directly with EMI. And also SMI help control the power domain and clocks for
> -each local arbiter.
> - Normally we specify a local arbiter(larb) for each multimedia HW
> -like display, video decode, and camera. And there are different ports
> -in each larb. Take a example, There are many ports like MC, PP, VLD in the
> -video decode local arbiter, all these ports are according to the video HW.
> - In some SoCs, there may be a GALS(Global Async Local Sync) module between
> -smi-common and m4u, and additional GALS module between smi-larb and
> -smi-common. GALS can been seen as a "asynchronous fifo" which could help
> -synchronize for the modules in different clock frequency.
> -
> -Required properties:
> -- compatible : must be one of the following string:
> - "mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
> - "mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
> - "mediatek,mt6779-m4u" for mt6779 which uses generation two m4u HW.
> - "mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
> - generation one m4u HW.
> - "mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
> - "mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW.
> -- reg : m4u register base and size.
> -- interrupts : the interrupt of m4u.
> -- clocks : must contain one entry for each clock-names.
> -- clock-names : Only 1 optional clock:
> - - "bclk": the block clock of m4u.
> - Here is the list which require this "bclk":
> - - mt2701, mt2712, mt7623 and mt8173.
> - Note that m4u use the EMI clock which always has been enabled before kernel
> - if there is no this "bclk".
> -- mediatek,larbs : List of phandle to the local arbiters in the current Socs.
> - Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort
> - according to the local arbiter index, like larb0, larb1, larb2...
> -- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
> - Specifies the mtk_m4u_id as defined in
> - dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
> - dt-binding/memory/mt2712-larb-port.h for mt2712,
> - dt-binding/memory/mt6779-larb-port.h for mt6779,
> - dt-binding/memory/mt8173-larb-port.h for mt8173, and
> - dt-binding/memory/mt8183-larb-port.h for mt8183.
> -
> -Example:
> - iommu: iommu@10205000 {
> - compatible = "mediatek,mt8173-m4u";
> - reg = <0 0x10205000 0 0x1000>;
> - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
> - clocks = <&infracfg CLK_INFRA_M4U>;
> - clock-names = "bclk";
> - mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 &larb4 &larb5>;
> - #iommu-cells = <1>;
> - };
> -
> -Example for a client device:
> - display {
> - compatible = "mediatek,mt8173-disp";
> - iommus = <&iommu M4U_PORT_DISP_OVL0>,
> - <&iommu M4U_PORT_DISP_RDMA0>;
> - ...
> - };
> diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
> new file mode 100644
> index 000000000000..d7b31bda3e35
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
> @@ -0,0 +1,150 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iommu/mediatek,iommu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek IOMMU Architecture Implementation
> +
> +maintainers:
> + - Yong Wu <yong.wu@mediatek.com>
> + - Chao Hao <chao.hao@mediatek.com>
> +
> +description: |+
> + Some MediaTek SOCs contain a Multimedia Memory Management Unit (M4U), and
> + this M4U have two generations of HW architecture. Generation one uses flat
> + pagetable, and only supports 4K size page mapping. Generation two uses the
> + ARM Short-Descriptor translation table format for address translation.
> +
> + About the M4U Hardware Block Diagram, please check below:
> +
> + EMI (External Memory Interface)
> + |
> + m4u (Multimedia Memory Management Unit)
> + |
> + +--------+
> + | |
> + gals0-rx gals1-rx (Global Async Local Sync rx)
> + | |
> + | |
> + gals0-tx gals1-tx (Global Async Local Sync tx)
> + | | Some SoCs may have GALS.
> + +--------+
> + |
> + SMI Common(Smart Multimedia Interface Common)
> + |
> + +----------------+-------
> + | |
> + | gals-rx There may be GALS in some larbs.
> + | |
> + | |
> + | gals-tx
> + | |
> + SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb).
> + (display) (vdec)
> + | |
> + | |
> + +-----+-----+ +----+----+
> + | | | | | |
> + | | |... | | | ... There are different ports in each larb.
> + | | | | | |
> + OVL0 RDMA0 WDMA0 MC PP VLD
> +
> + As above, The Multimedia HW will go through SMI and M4U while it
> + access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
> + smi local arbiter and smi common. It will control whether the Multimedia
> + HW should go though the m4u for translation or bypass it and talk
> + directly with EMI. And also SMI help control the power domain and clocks for
> + each local arbiter.
> +
> + Normally we specify a local arbiter(larb) for each multimedia HW
> + like display, video decode, and camera. And there are different ports
> + in each larb. Take a example, There are many ports like MC, PP, VLD in the
> + video decode local arbiter, all these ports are according to the video HW.
> +
> + In some SoCs, there may be a GALS(Global Async Local Sync) module between
> + smi-common and m4u, and additional GALS module between smi-larb and
> + smi-common. GALS can been seen as a "asynchronous fifo" which could help
> + synchronize for the modules in different clock frequency.
> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt2701-m4u #mt2701 generation one HW
> + - mediatek,mt2712-m4u #mt2712 generation two HW
> + - mediatek,mt6779-m4u #mt6779 generation two HW
> + - mediatek,mt7623-m4u, mediatek,mt2701-m4u #mt7623 generation one HW

This is not right.

items:
- const: mediatek,mt7623-m4u
- const: mediatek,mt2701-m4u

And that has to be under a 'oneOf' with the rest of this.

> + - mediatek,mt8173-m4u #mt8173 generation two HW
> + - mediatek,mt8183-m4u #mt8183 generation two HW
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + bclk is optional. here is the list which require this bclk:
> + mt2701, mt2712, mt7623 and mt8173.
> + M4U will use the EMI clock which always has been enabled before
> + kernel if there is no this bclk.
> + items:
> + - description: bclk is the block clock.
> +
> + clock-names:
> + items:
> + - const: bclk
> +
> + mediatek,larbs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: |
> + List of phandle to the local arbiters in the current Socs.
> + Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort
> + according to the local arbiter index, like larb0, larb1, larb2...
> +
> + '#iommu-cells':
> + const: 1
> + description: |
> + This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as
> + defined in
> + dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623,
> + dt-binding/memory/mt2712-larb-port.h for mt2712,
> + dt-binding/memory/mt6779-larb-port.h for mt6779,
> + dt-binding/memory/mt8173-larb-port.h for mt8173,
> + dt-binding/memory/mt8183-larb-port.h for mt8183.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - mediatek,larbs
> + - '#iommu-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + iommu: iommu@10205000 {
> + compatible = "mediatek,mt8173-m4u";
> + reg = <0x10205000 0x1000>;
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_INFRA_M4U>;
> + clock-names = "bclk";
> + mediatek,larbs = <&larb0 &larb1 &larb2
> + &larb3 &larb4 &larb5>;
> + #iommu-cells = <1>;
> + };
> +
> + - |
> + #include <dt-bindings/memory/mt8173-larb-port.h>
> +
> + /* Example for a client device */
> + display {
> + compatible = "mediatek,mt8173-disp";
> + iommus = <&iommu M4U_PORT_DISP_OVL0>,
> + <&iommu M4U_PORT_DISP_RDMA0>;
> + };
> --
> 2.18.0

\
 
 \ /
  Last update: 2020-09-15 01:22    [W:0.197 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site