lkml.org 
[lkml]   [2020]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH V3 15/21] mmc: sdhci: UHS-II support, modify set_power() to handle vdd2
From
Date
On 14/09/20 8:45 am, AKASHI Takahiro wrote:
> Adrian,
>
> On Fri, Aug 21, 2020 at 05:11:18PM +0300, Adrian Hunter wrote:
>> On 10/07/20 2:11 pm, Ben Chuang wrote:
>>> From: AKASHI Takahiro <takahiro.akashi@linaro.org>
>>>
>>> VDD2 is used for powering UHS-II interface.
>>> Modify sdhci_set_power_and_bus_voltage(), sdhci_set_power_noreg()
>>> and sdhci_set_power_noreg() to handle VDD2.
>>
>> vdd2 is always 1.8 V and I suspect there may never be support for anything
>> else, so we should start with 1.8 V only.
>
> What do you mean here?
> You don't want to add an extra argument, vdd2, to sdhci_set_power().
> Correct?

Yes

>
>> Also can we create uhs2_set_power_reg() and uhs2_set_power_noreg() and use
>> the existing ->set_power() callback
>
> Again what do you expect here?
>
> Do you want to see any platform-specific mmc driver who supports UHS-II
> to implement its own call back like:

Not exactly. I expect there to be a common implementation in sdhci-uhs2.c
called sdhci_uhs2_set_power() for example, that drivers can use by setting
their .set_power = sdhci_uhs2_set_power. If they need platform-specific
code as well then their platform-specific code can call
sdhci_uhs2_set_power() if desired.

>
> void sdhci_foo_set_power(struct sdhci_host *host, unsigned char mode,
> unsigned short vdd)
> {
> sdhci_set_power(host, mode,vdd);
>
> /* in case that sdhci_uhs2 module is not inserted */
> if (!(mmc->caps & MMC_CAP_UHS2))
> return;
>
> /* vdd2 specific operation */
> if (IS_ERR_OR_NULL(host->mmc->supply.vmmc2))
> sdhci_uhs2_set_power_noreg(host, mode);
> else
> sdhci_uhs2_set_power_reg(host, mode);
>
> /* maybe more platform-specific initialization */
> }
>
> struct sdhci_ops sdhci_foo_ops = {
> .set_power = sdhci_foo_set_power,
> ...
> }
>
> Is this what you mean?
> (I'm not quite sure yet that sdhci_ush2_set_power_noreg() can be split off
> from sdhci_set_power_noreg().)
>
> -Takahiro Akashi

\
 
 \ /
  Last update: 2020-09-14 08:37    [W:0.073 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site