lkml.org 
[lkml]   [2020]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC/RFT PATCH v2 0/5] Unify NUMA implementation between ARM64 & RISC-V
On Mon, Sep 14, 2020 at 1:07 AM Jonathan Cameron
<Jonathan.Cameron@huawei.com> wrote:
>
> On Fri, 11 Sep 2020 18:34:36 -0700
> Atish Patra <atish.patra@wdc.com> wrote:
>
>
> Hi Atish,
>
> I'm not seeing a change log from v1. Putting one in makes it easier
> for people who reviewed v1 to remember what to look for when looking
> at v2.
>

My bad. I usually add a change log in the header patch but forgot this time.
I will send out a v3 soon and update those.

Thanks for reviewing the patches.
> Either here, or individual patches after the --- is fine.
>
> Thanks,
>
> Jonathan
>
>
> > This series attempts to move the ARM64 numa implementation to common
> > code so that RISC-V can leverage that as well instead of reimplementing
> > it again.
> >
> > RISC-V specific bits are based on initial work done by Greentime Hu [1] but
> > modified to reuse the common implementation to avoid duplication.
> >
> > [1] https://lkml.org/lkml/2020/1/10/233
> >
> > This series has been tested on qemu with numa enabled for both RISC-V & ARM64.
> > It would be great if somebody can test it on numa capable ARM64 hardware platforms.
> > This patch series doesn't modify the maintainers list for the common code (arch_numa)
> > as I am not sure if somebody from ARM64 community or Greg should take up the
> > maintainership. Ganapatrao was the original author of the arm64 version.
> > I would be happy to update that in the next revision once it is decided.
> >
> > # numactl --hardware
> > available: 2 nodes (0-1)
> > node 0 cpus: 0 1 2 3
> > node 0 size: 486 MB
> > node 0 free: 470 MB
> > node 1 cpus: 4 5 6 7
> > node 1 size: 424 MB
> > node 1 free: 408 MB
> > node distances:
> > node 0 1
> > 0: 10 20
> > 1: 20 10
> > # numactl -show
> > policy: default
> > preferred node: current
> > physcpubind: 0 1 2 3 4 5 6 7
> > cpubind: 0 1
> > nodebind: 0 1
> > membind: 0 1
> >
> > For RISC-V, the following qemu series is a pre-requisite(already available in upstream)
> > to test the patches in Qemu and 2 socket OmniXtend FPGA.
> >
> > https://patchwork.kernel.org/project/qemu-devel/list/?series=303313
> >
> > The patches are also available at
> >
> > https://github.com/atishp04/linux/tree/5.10_numa_unified_v2
> >
> > There may be some minor conflicts with Mike's cleanup series [2] depending on the
> > order in which these two series are being accepted. I can rebase on top his series
> > if required.
> >
> > [2] https://lkml.org/lkml/2020/8/18/754
> >
> > Atish Patra (4):
> > numa: Move numa implementation to common code
> > arm64, numa: Change the numa init function name to be generic
> > riscv: Separate memory init from paging init
> > riscv: Add numa support for riscv64 platform
> >
> > Greentime Hu (1):
> > riscv: Add support pte_protnone and pmd_protnone if
> > CONFIG_NUMA_BALANCING
> >
> > arch/arm64/Kconfig | 1 +
> > arch/arm64/include/asm/numa.h | 45 +----------------
> > arch/arm64/kernel/acpi_numa.c | 13 -----
> > arch/arm64/mm/Makefile | 1 -
> > arch/arm64/mm/init.c | 4 +-
> > arch/riscv/Kconfig | 31 +++++++++++-
> > arch/riscv/include/asm/mmzone.h | 13 +++++
> > arch/riscv/include/asm/numa.h | 8 +++
> > arch/riscv/include/asm/pci.h | 14 ++++++
> > arch/riscv/include/asm/pgtable.h | 21 ++++++++
> > arch/riscv/kernel/setup.c | 11 ++++-
> > arch/riscv/kernel/smpboot.c | 12 ++++-
> > arch/riscv/mm/init.c | 10 +++-
> > drivers/base/Kconfig | 6 +++
> > drivers/base/Makefile | 1 +
> > .../mm/numa.c => drivers/base/arch_numa.c | 29 +++++++++--
> > include/asm-generic/numa.h | 49 +++++++++++++++++++
> > 17 files changed, 200 insertions(+), 69 deletions(-)
> > create mode 100644 arch/riscv/include/asm/mmzone.h
> > create mode 100644 arch/riscv/include/asm/numa.h
> > rename arch/arm64/mm/numa.c => drivers/base/arch_numa.c (95%)
> > create mode 100644 include/asm-generic/numa.h
> >
> > --
> > 2.24.0
> >
>
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv



--
Regards,
Atish

\
 
 \ /
  Last update: 2020-09-14 21:34    [W:0.151 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site