lkml.org 
[lkml]   [2020]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 00/12] SVM cleanup and INVPCID feature support
From
Date


On 9/12/20 12:08 PM, Paolo Bonzini wrote:
> On 11/09/20 21:27, Babu Moger wrote:
>> The following series adds the support for PCID/INVPCID on AMD guests.
>> While doing it re-structured the vmcb_control_area data structure to
>> combine all the intercept vectors into one 32 bit array. Makes it easy
>> for future additions. Re-arranged few pcid related code to make it common
>> between SVM and VMX.
>>
>> INVPCID interceptions are added only when the guest is running with shadow
>> page table enabled. In this case the hypervisor needs to handle the tlbflush
>> based on the type of invpcid instruction.
>>
>> For the guests with nested page table (NPT) support, the INVPCID feature
>> works as running it natively. KVM does not need to do any special handling.
>>
>> AMD documentation for INVPCID feature is available at "AMD64 Architecture
>> Programmer’s Manual Volume 2: System Programming, Pub. 24593 Rev. 3.34(or later)"
>>
>> The documentation can be obtained at the links below:
>> Link: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.amd.com%2Fsystem%2Ffiles%2FTechDocs%2F24593.pdf&data=02%7C01%7Cbabu.moger%40amd.com%7Cd2bca7c6209743a7fe0e08d8573e70fd%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637355274033139116&sdata=C3EGywJcz3rAPmjckWGKbm7GkHR1Xyrl%2BIL9sEijhcQ%3D&reserved=0
>> Link: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzilla.kernel.org%2Fshow_bug.cgi%3Fid%3D206537&data=02%7C01%7Cbabu.moger%40amd.com%7Cd2bca7c6209743a7fe0e08d8573e70fd%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637355274033139116&sdata=29n8WNNpcUgVQRUyxbiSPcWJGTL5uV%2FaHgHXU1b9BjI%3D&reserved=0
>> ---
>>
>> v6:
>> One minor change in patch #04. Otherwise same as v5.
>> Updated all the patches by Reviewed-by.
>>
>> v5:
>> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Flkml%2F159846887637.18873.14677728679411578606.stgit%40bmoger-ubuntu%2F&data=02%7C01%7Cbabu.moger%40amd.com%7Cd2bca7c6209743a7fe0e08d8573e70fd%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637355274033139116&sdata=D7HvBj6OArmpKsiaZj0Qk3mIHWYOOUN23f53ajhQpOY%3D&reserved=0
>> All the changes are related to rebase.
>> Aplies cleanly on mainline and kvm(master) tree.
>> Resending it to get some attention.
>>
>> v4:
>> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Flkml%2F159676101387.12805.18038347880482984693.stgit%40bmoger-ubuntu%2F&data=02%7C01%7Cbabu.moger%40amd.com%7Cd2bca7c6209743a7fe0e08d8573e70fd%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637355274033139116&sdata=7og620g0qsxee7Wd60emz5YdbA44Al4tiUJX5n46MhE%3D&reserved=0
>> 1. Changed the functions __set_intercept/__clr_intercept/__is_intercept to
>> to vmcb_set_intercept/vmcb_clr_intercept/vmcb_is_intercept by passing
>> vmcb_control_area structure(Suggested by Paolo).
>> 2. Rearranged the commit 7a35e515a7055 ("KVM: VMX: Properly handle kvm_read/write_guest_virt*())
>> to make it common across both SVM/VMX(Suggested by Jim Mattson).
>> 3. Took care of few other comments from Jim Mattson. Dropped "Reviewed-by"
>> on few patches which I have changed since v3.
>>
>> v3:
>> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Flkml%2F159597929496.12744.14654593948763926416.stgit%40bmoger-ubuntu%2F&data=02%7C01%7Cbabu.moger%40amd.com%7Cd2bca7c6209743a7fe0e08d8573e70fd%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637355274033139116&sdata=hvPNH827bmo1VL%2F%2FIv%2F%2ByQdVBygOpI1tkgQ6ASf5Wt8%3D&reserved=0
>> 1. Addressing the comments from Jim Mattson. Follow the v2 link below
>> for the context.
>> 2. Introduced the generic __set_intercept, __clr_intercept and is_intercept
>> using native __set_bit, clear_bit and test_bit.
>> 3. Combined all the intercepts vectors into single 32 bit array.
>> 4. Removed set_intercept_cr, clr_intercept_cr, set_exception_intercepts,
>> clr_exception_intercept etc. Used the generic set_intercept and
>> clr_intercept where applicable.
>> 5. Tested both L1 guest and l2 nested guests.
>>
>> v2:
>> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Flkml%2F159234483706.6230.13753828995249423191.stgit%40bmoger-ubuntu%2F&data=02%7C01%7Cbabu.moger%40amd.com%7Cd2bca7c6209743a7fe0e08d8573e70fd%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637355274033139116&sdata=rP%2BlRJ91tk1VXS3YX8TdP2L9vORiIj8gN3ZZLKIXfeY%3D&reserved=0
>> - Taken care of few comments from Jim Mattson.
>> - KVM interceptions added only when tdp is off. No interceptions
>> when tdp is on.
>> - Reverted the fault priority to original order in VMX.
>>
>> v1:
>> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Flkml%2F159191202523.31436.11959784252237488867.stgit%40bmoger-ubuntu%2F&data=02%7C01%7Cbabu.moger%40amd.com%7Cd2bca7c6209743a7fe0e08d8573e70fd%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637355274033139116&sdata=IGmv%2BLF60dmGVSCwcTU6sTDMvW1%2BEWUqTA5K%2FAowuxM%3D&reserved=0
>>
>> Babu Moger (12):
>> KVM: SVM: Introduce vmcb_(set_intercept/clr_intercept/_is_intercept)
>> KVM: SVM: Change intercept_cr to generic intercepts
>> KVM: SVM: Change intercept_dr to generic intercepts
>> KVM: SVM: Modify intercept_exceptions to generic intercepts
>> KVM: SVM: Modify 64 bit intercept field to two 32 bit vectors
>> KVM: SVM: Add new intercept vector in vmcb_control_area
>> KVM: nSVM: Cleanup nested_state data structure
>> KVM: SVM: Remove set_cr_intercept, clr_cr_intercept and is_cr_intercept
>> KVM: SVM: Remove set_exception_intercept and clr_exception_intercept
>> KVM: X86: Rename and move the function vmx_handle_memory_failure to x86.c
>> KVM: X86: Move handling of INVPCID types to x86
>> KVM:SVM: Enable INVPCID feature on AMD
>>
>>
>> arch/x86/include/asm/svm.h | 117 +++++++++++++++++++++++++----------
>> arch/x86/include/uapi/asm/svm.h | 2 +
>> arch/x86/kvm/svm/nested.c | 66 +++++++++-----------
>> arch/x86/kvm/svm/svm.c | 131 ++++++++++++++++++++++++++-------------
>> arch/x86/kvm/svm/svm.h | 87 +++++++++-----------------
>> arch/x86/kvm/trace.h | 21 ++++--
>> arch/x86/kvm/vmx/nested.c | 12 ++--
>> arch/x86/kvm/vmx/vmx.c | 95 ----------------------------
>> arch/x86/kvm/vmx/vmx.h | 2 -
>> arch/x86/kvm/x86.c | 106 ++++++++++++++++++++++++++++++++
>> arch/x86/kvm/x86.h | 3 +
>> 11 files changed, 364 insertions(+), 278 deletions(-)
>>
>> --
>> Signature
>>
>
> Queued except for patch 9 with only some changes to the names (mostly
> replacing "vector" with "word"). It should get to kvm.git on Monday or
> Tuesday, please give it a shot.

Thanks Paolo. Tested Guest/nested guest/kvm units tests. Everything works
as expected.

\
 
 \ /
  Last update: 2020-09-14 20:33    [W:0.975 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site