lkml.org 
[lkml]   [2020]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] usb: phy: tegra: Use IS_ERR() to check and simplify code
From
Date
Hello!

On 10.09.2020 14:56, Tang Bin wrote:

> Use IS_ERR() and PTR_ERR() instead of PTR_ERR_OR_ZERO() to
> simplify code, avoid redundant judgements.
>
> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
> ---
> drivers/usb/phy/phy-tegra-usb.c | 25 ++++++++++---------------
> 1 file changed, 10 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
> index 6153cc35a..3b901429d 100644
> --- a/drivers/usb/phy/phy-tegra-usb.c
> +++ b/drivers/usb/phy/phy-tegra-usb.c
> @@ -1121,10 +1121,9 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
> return PTR_ERR(tegra_phy->vbus);
>
> tegra_phy->pll_u = devm_clk_get(&pdev->dev, "pll_u");
> - err = PTR_ERR_OR_ZERO(tegra_phy->pll_u);
> - if (err) {
> + if (IS_ERR(tegra_phy->pll_u)) {
> dev_err(&pdev->dev, "Failed to get pll_u clock: %d\n", err);

'err' should be changed here too...

> - return err;
> + return PTR_ERR(tegra_phy->pll_u);
> }
>
> phy_type = of_usb_get_phy_mode(np);
> @@ -1135,20 +1134,18 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
> return err;
>
> tegra_phy->pad_clk = devm_clk_get(&pdev->dev, "utmi-pads");
> - err = PTR_ERR_OR_ZERO(tegra_phy->pad_clk);
> - if (err) {
> + if (IS_ERR(tegra_phy->pad_clk)) {
> dev_err(&pdev->dev,
> "Failed to get UTMIP pad clock: %d\n", err);

Same here.

> - return err;
> + return PTR_ERR(tegra_phy->pad_clk);
> }
>
> reset = devm_reset_control_get_optional_shared(&pdev->dev,
> "utmi-pads");
> - err = PTR_ERR_OR_ZERO(reset);
> - if (err) {
> + if (IS_ERR(reset)) {
> dev_err(&pdev->dev,
> "Failed to get UTMI-pads reset: %d\n", err);

And here.

> - return err;
> + return PTR_ERR(reset);
> }
> tegra_phy->pad_rst = reset;
> break;
> @@ -1157,22 +1154,20 @@ static int tegra_usb_phy_probe(struct platform_device *pdev)
> tegra_phy->is_ulpi_phy = true;
>
> tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link");
> - err = PTR_ERR_OR_ZERO(tegra_phy->clk);
> - if (err) {
> + if (IS_ERR(tegra_phy->clk)) {
> dev_err(&pdev->dev,
> "Failed to get ULPI clock: %d\n", err);

And here.

> - return err;
> + return PTR_ERR(tegra_phy->clk);
> }
>
> gpiod = devm_gpiod_get_from_of_node(&pdev->dev, np,
> "nvidia,phy-reset-gpio",
> 0, GPIOD_OUT_HIGH,
> "ulpi_phy_reset_b");
> - err = PTR_ERR_OR_ZERO(gpiod);
> - if (err) {
> + if (IS_ERR(gpiod)) {
> dev_err(&pdev->dev,
> "Request failed for reset GPIO: %d\n", err);

And here.

> - return err;
> + return PTR_ERR(gpiod);
> }
> tegra_phy->reset_gpio = gpiod;
>

Overall, this patch is broken and not even worth redoing -- the current
code seems good...

MBR, Sergei

\
 
 \ /
  Last update: 2020-09-11 10:31    [W:0.092 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site