lkml.org 
[lkml]   [2020]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 0/4] Remove LPC register partitioning
Date
Hello,

Thanks for your prompt feedback.

> -----Original Message-----
> From: Andrew Jeffery <andrew@aj.id.au>
> Sent: Friday, September 11, 2020 12:46 PM
> To: Joel Stanley <joel@jms.id.au>; ChiaWei Wang
> <chiawei_wang@aspeedtech.com>
> Subject: Re: [PATCH 0/4] Remove LPC register partitioning
>
>
> On Fri, 11 Sep 2020, at 13:33, Joel Stanley wrote:
> > Hello,
> >
> > On Fri, 11 Sep 2020 at 03:46, Chia-Wei, Wang
> > <chiawei_wang@aspeedtech.com> wrote:
> > >
> > > The LPC controller has no concept of the BMC and the Host partitions.
> > > The incorrect partitioning can impose unnecessary range restrictions
> > > on register access through the syscon regmap interface.
> > >
> > > For instance, HICRB contains the I/O port address configuration of
> > > KCS channel 1/2. However, the KCS#1/#2 drivers cannot access HICRB
> > > as it is located at the other LPC partition.
>
> Thanks for addressing this, I've regretted that choice for a while now.
>
> The split was rooted in trying to support pinmux while not being across every
> detail of the LPC controller, and so I made some poor decisions.
>
> > >
> > > In addition, to be backward compatible, the newly added HW control
> > > bits could be added at any reserved bits over the LPC addressing space.
> > >
> > > Thereby, this patch series aims to remove the LPC partitioning for
> > > better driver development and maintenance.
> >
> > I support this cleanup. The only consideration is to be careful with
> > breaking the driver/device-tree relationship. We either need to ensure
> > the drivers remain compatible with both device trees.
> >
> > Another solution is to get agreement from all parties that for the LPC
> > device the device tree is always the one shipped with the kernel, so
> > it is okay to make incompatible changes.
If it is possible, I would prefer this solution to avoid adding additional if-logic for the compatibility support in the driver implementation.
As the patch can be less change made to register offset definitions and leave the core logic untouched.
> >
> > While we are doing a cleanup, Andrew suggested we remove the detailed
> > description of LPC out of the device tree. We would have the one LPC
> > node, and create a LPC driver that creates all of the sub devices
> > (snoop, FW cycles, kcs, bt, vuart). Andrew, can you elaborate on this
> > plan?
>
> I dug up the conversation I had with Rob over a year ago about being unhappy
> with what I'd cooked up.
>
> https://lore.kernel.org/linux-arm-kernel/CAL_JsqJ+sFDG8eKbV3gvmqVHx+otW
> bki4dY213apzXgfhbXXEw@mail.gmail.com/
>
> But I think you covered most of the idea there: We have the LPC driver create
> the subdevices and that moves the details out of the devicetree.
> However, I haven't thought about it more than that, and I think there are still
> problems with that idea. For instance, how we manage configuration of those
> devices, and how to enable only the devices a given platform actually cares
> about (i.e. the problems that devicetree solves for us).
Another concern to make centralized LPC driver implementation more complicated is the relationship with eSPI driver.
AST2500 binds the reset control of LPC and eSPI together. If eSPI is used for the Host communication, the behavior in current "lpc-ctrl" should be skipped but not for KCS, BT, Snoop, etc.
And this will be much easier to achieve by devicetree if LPC sub devices are individually described.
>
> It may be that the only way to do that is with platform code, and that's not
> really a direction we should be going either.
>

\
 
 \ /
  Last update: 2020-09-11 10:22    [W:0.087 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site