lkml.org 
[lkml]   [2020]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next + leds v2 6/7] net: phy: marvell: add support for LEDs controlled by Marvell PHYs
On Thu 2020-09-10 15:15:41, Andrew Lunn wrote:
> On Thu, Sep 10, 2020 at 02:23:41PM +0200, Pavel Machek wrote:
> > On Wed 2020-09-09 18:25:51, Marek Behún wrote:
> > > This patch adds support for controlling the LEDs connected to several
> > > families of Marvell PHYs via the PHY HW LED trigger API. These families
> > > are: 88E1112, 88E1121R, 88E1240, 88E1340S, 88E1510 and 88E1545. More can
> > > be added.
> > >
> > > This patch does not yet add support for compound LED modes. This could
> > > be achieved via the LED multicolor framework.
> > >
> > > Settings such as HW blink rate or pulse stretch duration are not yet
> > > supported.
> > >
> > > Signed-off-by: Marek Behún <marek.behun@nic.cz>
> >
> > I suggest limiting to "useful" hardware modes, and documenting what
> > those modes do somewhere.
>
> I think to keep the YAML DT verification happy, they will need to be
> listed in the marvell PHY binding documentation.

Well, this should really go to the sysfs documenation. Not sure what
to do with DT.

But perhaps driver can set reasonable defaults without DT input?

Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-09-10 20:28    [W:0.160 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site