lkml.org 
[lkml]   [2020]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 12/15] ARM: dts: aspeed: align GPIO hog names with dtschema
Date
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 16 ++++++++--------
2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 1fa233d2da26..0aa437486a0d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -560,7 +560,7 @@
gpio-controller;
#gpio-cells = <2>;

- smbus0 {
+ smbus0-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index cb85168f6761..577c211c469e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -827,7 +827,7 @@
gpio-controller;
#gpio-cells = <2>;

- smbus0 {
+ smbus0-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -852,7 +852,7 @@
gpio-controller;
#gpio-cells = <2>;

- smbus1 {
+ smbus1-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -900,7 +900,7 @@
gpio-controller;
#gpio-cells = <2>;

- smbus2 {
+ smbus2-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -925,7 +925,7 @@
gpio-controller;
#gpio-cells = <2>;

- smbus3 {
+ smbus3-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -992,7 +992,7 @@
gpio-controller;
#gpio-cells = <2>;

- smbus4 {
+ smbus4-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -1017,7 +1017,7 @@
gpio-controller;
#gpio-cells = <2>;

- smbus5 {
+ smbus5-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -1065,7 +1065,7 @@
gpio-controller;
#gpio-cells = <2>;

- smbus6 {
+ smbus6-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
@@ -1090,7 +1090,7 @@
gpio-controller;
#gpio-cells = <2>;

- smbus7 {
+ smbus7-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
--
2.17.1
\
 
 \ /
  Last update: 2020-09-10 20:13    [W:0.239 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site