lkml.org 
[lkml]   [2020]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field
Date
The AT24 EEPROM driver does not initialise the 'id' field of the
nvmem_config structure and because the entire structure is not
initialised, it ends up with a random value. This causes the NVMEM
driver to append the device 'devid' value to name of the NVMEM
device. Although this is not a problem per-se, for I2C devices such as
the AT24, that already have a device unique name, there does not seem
much value in appending an additional 0 to the I2C name. For example,
appending a 0 to an I2C device name such as 1-0050 does not seem
necessary and maybe even a bit confusing. Therefore, fix this by
setting the NVMEM config.id to NVMEM_DEVID_NONE for AT24 EEPROMs.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
drivers/misc/eeprom/at24.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index e9df1ca251df..3f7a3bb6a36c 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -715,6 +715,7 @@ static int at24_probe(struct i2c_client *client)

nvmem_config.name = dev_name(dev);
nvmem_config.dev = dev;
+ nvmem_config.id = NVMEM_DEVID_NONE;
nvmem_config.read_only = !writable;
nvmem_config.root_only = !(flags & AT24_FLAG_IRUGO);
nvmem_config.owner = THIS_MODULE;
--
2.25.1
\
 
 \ /
  Last update: 2020-09-10 23:32    [W:0.084 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site