lkml.org 
[lkml]   [2020]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] leds: mt6360: Add LED driver for MT6360
From
Date
On 9/10/20 10:25 PM, Pavel Machek wrote:
> Hi!
>
>>>> 1. set FLED1 brightness
>>>> # echo 1 > /sys/class/leds/white:flash1/flash_brightness
>>>> 2. enable FLED1 strobe
>>>> # echo 1 > /sys/class/leds/white:flash1/flash_strobe
>>>> 3 . turn off FLED1 strobe (just used to gaurantee the strobe mode
>>>> flash leds must be turned off)
>>>> # echo 0 > /sys/class/leds/white:flash1/flash_strobe
>>>
>>> I believe I'd preffer only exposing torch functionality in
>>> /sys/class/leds. .. strobe can be supported using v4l2 APIs.
>>
>> Actually having LED flash class without strobe is pointless.
>> If you looked at led_classdev_flash_register_ext() you would see that
>> it fails with uninitialized strobe_set op. And V4L2 API for strobing
>> flash calls strobe_set from LED flash class beneath.
>>
>> That was the idea behind LED and V4L2 flash API unification - there
>> is one hardware driver needed, the V4L2 Flash layer just takes over
>> control over it when needed.
>
> I agree that one driver is enough.
>
> But we should not need flash_strobe file in sysfs. Simply use V4L2 for
> that.

Apart from the fact that we can't remove it from LED flash class ABI
now, why would you like to prevent the user from exploiting main feature
of the hardware?

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2020-09-10 22:38    [W:0.061 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site