lkml.org 
[lkml]   [2020]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 3/3] vfio/pci: Decouple PCI_COMMAND_MEMORY bit checks from is_virtfn
Date
While it is true that devices with is_virtfn=1 will have a Memory Space
Enable bit that is hard-wired to 0, this is not the only case where we
see this behavior -- For example some bare-metal hypervisors lack
Memory Space Enable bit emulation for devices not setting is_virtfn
(s390). Fix this by instead checking for the newly-added
no_command_memory bit which directly denotes the need for
PCI_COMMAND_MEMORY emulation in vfio.

Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
---
drivers/vfio/pci/vfio_pci_config.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index d98843f..5076d01 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -406,7 +406,7 @@ bool __vfio_pci_memory_enabled(struct vfio_pci_device *vdev)
* PF SR-IOV capability, there's therefore no need to trigger
* faults based on the virtual value.
*/
- return pdev->is_virtfn || (cmd & PCI_COMMAND_MEMORY);
+ return pdev->no_command_memory || (cmd & PCI_COMMAND_MEMORY);
}

/*
@@ -520,8 +520,8 @@ static int vfio_basic_config_read(struct vfio_pci_device *vdev, int pos,

count = vfio_default_config_read(vdev, pos, count, perm, offset, val);

- /* Mask in virtual memory enable for SR-IOV devices */
- if (offset == PCI_COMMAND && vdev->pdev->is_virtfn) {
+ /* Mask in virtual memory enable */
+ if (offset == PCI_COMMAND && vdev->pdev->no_command_memory) {
u16 cmd = le16_to_cpu(*(__le16 *)&vdev->vconfig[PCI_COMMAND]);
u32 tmp_val = le32_to_cpu(*val);

@@ -589,9 +589,11 @@ static int vfio_basic_config_write(struct vfio_pci_device *vdev, int pos,
* shows it disabled (phys_mem/io, then the device has
* undergone some kind of backdoor reset and needs to be
* restored before we allow it to enable the bars.
- * SR-IOV devices will trigger this, but we catch them later
+ * SR-IOV devices will trigger this - for mem enable let's
+ * catch this now and for io enable it will be caught later
*/
- if ((new_mem && virt_mem && !phys_mem) ||
+ if ((new_mem && virt_mem && !phys_mem &&
+ !pdev->no_command_memory) ||
(new_io && virt_io && !phys_io) ||
vfio_need_bar_restore(vdev))
vfio_bar_restore(vdev);
@@ -1734,12 +1736,14 @@ int vfio_config_init(struct vfio_pci_device *vdev)
vconfig[PCI_INTERRUPT_PIN]);

vconfig[PCI_INTERRUPT_PIN] = 0; /* Gratuitous for good VFs */
-
+ }
+ if (pdev->no_command_memory) {
/*
- * VFs do no implement the memory enable bit of the COMMAND
- * register therefore we'll not have it set in our initial
- * copy of config space after pci_enable_device(). For
- * consistency with PFs, set the virtual enable bit here.
+ * VFs and devices that set pdev->no_command_memory do not
+ * implement the memory enable bit of the COMMAND register
+ * therefore we'll not have it set in our initial copy of
+ * config space after pci_enable_device(). For consistency
+ * with PFs, set the virtual enable bit here.
*/
*(__le16 *)&vconfig[PCI_COMMAND] |=
cpu_to_le16(PCI_COMMAND_MEMORY);
--
1.8.3.1
\
 
 \ /
  Last update: 2020-09-10 22:04    [W:0.087 / U:3.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site