lkml.org 
[lkml]   [2020]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH 5/5] ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device
    On Thu, 20 Aug 2020 at 16:12, Eddie James <eajames@linux.ibm.com> wrote:
    >
    > Set I2C bus 7 to multi-master mode and add the panel device that will
    > register as a slave.
    >
    > Signed-off-by: Eddie James <eajames@linux.ibm.com>

    Same comments as for Tacoma.

    Reviewed-by: Joel Stanley <joel@jms.id.au>

    > ---
    > arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 ++++++
    > 1 file changed, 6 insertions(+)
    >
    > diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
    > index b94421f6cbd5..f121f3c26a3a 100644
    > --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
    > +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
    > @@ -698,6 +698,7 @@ eeprom@53 {
    > };
    >
    > &i2c7 {
    > + multi-master;
    > status = "okay";
    >
    > si7021-a20@20 {
    > @@ -831,6 +832,11 @@ gpio@15 {
    > };
    > };
    >
    > + ibm-panel@62 {
    > + compatible = "ibm,op-panel";
    > + reg = <0x40000062>; /* I2C_OWN_SLAVE_ADDRESS */
    > + };
    > +
    > dps: dps310@76 {
    > compatible = "infineon,dps310";
    > reg = <0x76>;
    > --
    > 2.26.2
    >

    \
     
     \ /
      Last update: 2020-09-01 08:02    [W:5.508 / U:0.056 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site