Messages in this thread Patch in this message | | | From | Marc Zyngier <> | Subject | [PATCH v3 08/16] irqchip/gic: Configure SGIs as standard interrupts | Date | Tue, 1 Sep 2020 15:43:16 +0100 |
| |
Change the way we deal with GIC SGIs by turning them into proper IRQs, and calling into the arch code to register the interrupt range instead of a callback.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> --- drivers/irqchip/irq-gic.c | 103 +++++++++++++++++++++++--------------- 1 file changed, 63 insertions(+), 40 deletions(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 4ffd62af888f..4be2b62f816f 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -315,7 +315,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type) static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu) { /* Only interrupts on the primary GIC can be forwarded to a vcpu. */ - if (cascading_gic_irq(d)) + if (cascading_gic_irq(d) || gic_irq(d) < 16) return -EINVAL; if (vcpu) @@ -335,31 +335,22 @@ static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK); irqnr = irqstat & GICC_IAR_INT_ID_MASK; - if (likely(irqnr > 15 && irqnr < 1020)) { - if (static_branch_likely(&supports_deactivate_key)) - writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI); - isb(); - handle_domain_irq(gic->domain, irqnr, regs); - continue; - } - if (irqnr < 16) { + if (unlikely(irqnr >= 1020)) + break; + + if (static_branch_likely(&supports_deactivate_key)) writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI); - if (static_branch_likely(&supports_deactivate_key)) - writel_relaxed(irqstat, cpu_base + GIC_CPU_DEACTIVATE); -#ifdef CONFIG_SMP - /* - * Ensure any shared data written by the CPU sending - * the IPI is read after we've read the ACK register - * on the GIC. - * - * Pairs with the write barrier in gic_raise_softirq - */ + isb(); + + /* + * Ensure any shared data written by the CPU sending the IPI + * is read after we've read the ACK register on the GIC. + * + * Pairs with the write barrier in gic_ipi_send_mask + */ + if (irqnr <= 15) smp_rmb(); - handle_IPI(irqnr, regs); -#endif - continue; - } - break; + handle_domain_irq(gic->domain, irqnr, regs); } while (1); } @@ -793,14 +784,14 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, return IRQ_SET_MASK_OK_DONE; } -static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) +static void gic_ipi_send_mask(struct irq_data *d, const struct cpumask *mask) { int cpu; unsigned long flags, map = 0; if (unlikely(nr_cpu_ids == 1)) { /* Only one CPU? let's do a self-IPI... */ - writel_relaxed(2 << 24 | irq, + writel_relaxed(2 << 24 | d->hwirq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); return; } @@ -818,7 +809,7 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) dmb(ishst); /* this always happens on GIC0 */ - writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); + writel_relaxed(map << 16 | d->hwirq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); gic_unlock_irqrestore(flags); } @@ -831,14 +822,28 @@ static int gic_starting_cpu(unsigned int cpu) static __init void gic_smp_init(void) { - set_smp_cross_call(gic_raise_softirq); + struct irq_fwspec sgi_fwspec = { + .fwnode = gic_data[0].domain->fwnode, + .param_count = 1, + }; + int base_sgi; + cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_GIC_STARTING, "irqchip/arm/gic:starting", gic_starting_cpu, NULL); + + base_sgi = __irq_domain_alloc_irqs(gic_data[0].domain, -1, 8, + NUMA_NO_NODE, &sgi_fwspec, + false, NULL); + if (WARN_ON(base_sgi <= 0)) + return; + + set_smp_ipi_range(base_sgi, 8); } #else #define gic_smp_init() do { } while(0) #define gic_set_affinity NULL +#define gic_ipi_send_mask NULL #endif #ifdef CONFIG_BL_SWITCHER @@ -985,15 +990,24 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq, { struct gic_chip_data *gic = d->host_data; - if (hw < 32) { + switch (hw) { + case 0 ... 15: + irq_set_percpu_devid(irq); + irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data, + handle_percpu_devid_fasteoi_ipi, + NULL, NULL); + break; + case 16 ... 31: irq_set_percpu_devid(irq); irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data, handle_percpu_devid_irq, NULL, NULL); - } else { + break; + default: irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data, handle_fasteoi_irq, NULL, NULL); irq_set_probe(irq); irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(irq))); + break; } return 0; } @@ -1007,19 +1021,26 @@ static int gic_irq_domain_translate(struct irq_domain *d, unsigned long *hwirq, unsigned int *type) { + if (fwspec->param_count == 1 && fwspec->param[0] < 16) { + *hwirq = fwspec->param[0]; + *type = IRQ_TYPE_EDGE_RISING; + return 0; + } + if (is_of_node(fwspec->fwnode)) { if (fwspec->param_count < 3) return -EINVAL; - /* Get the interrupt number and add 16 to skip over SGIs */ - *hwirq = fwspec->param[1] + 16; - - /* - * For SPIs, we need to add 16 more to get the GIC irq - * ID number - */ - if (!fwspec->param[0]) - *hwirq += 16; + switch (fwspec->param[0]) { + case 0: /* SPI */ + *hwirq = fwspec->param[1] + 32; + break; + case 1: /* PPI */ + *hwirq = fwspec->param[1] + 16; + break; + default: + return -EINVAL; + } *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK; @@ -1088,8 +1109,10 @@ static void gic_init_chip(struct gic_chip_data *gic, struct device *dev, gic->chip.irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity; } - if (gic == &gic_data[0]) + if (gic == &gic_data[0]) { gic->chip.irq_set_affinity = gic_set_affinity; + gic->chip.ipi_send_mask = gic_ipi_send_mask; + } } static int gic_init_bases(struct gic_chip_data *gic, -- 2.27.0
| |