lkml.org 
[lkml]   [2020]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
From
Date
Rob,

sorry for late reply, I have my head in setup production install the dt-schema
and rerun the check, with 2020-6 no warnings lets fix it.

Chris

On 13/7/2020 11:00 pm, Rob Herring wrote:
> On Sun, 12 Jul 2020 12:44:10 +0800, Chris Ruehl wrote:
>> Add documentation for the newly added DTS support in the shtc1 driver.
>> To align with the drivers logic to have high precision by default
>> a boolean sensirion,low_precision is used to switch to low precision.
>>
>> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
>> ---
>> .../bindings/hwmon/sensirion,shtc1.yaml | 57 +++++++++++++++++++
>> 1 file changed, 57 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>>
>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:24.13-26: Warning (reg_format): /example-0/i2c1/shtc3@70:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:22.20-26.13: Warning (avoid_default_addr_size): /example-0/i2c1/shtc3@70: Relying on default #address-cells value
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:22.20-26.13: Warning (avoid_default_addr_size): /example-0/i2c1/shtc3@70: Relying on default #size-cells value
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
>
>
> See https://patchwork.ozlabs.org/patch/1327453
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
>
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
>
> Please check and re-submit.
>

--
GTSYS Limited RFID Technology
9/F, Unit E, R07, Kwai Shing Industrial Building Phase 2,
42-46 Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong
Tel (852) 9079 9521

Disclaimer: https://www.gtsys.com.hk/email/classified.html

\
 
 \ /
  Last update: 2020-08-07 08:29    [W:0.050 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site