lkml.org 
[lkml]   [2020]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format
From
Date

On 8/3/2020 11:52 PM, Rob Herring wrote:
> On Mon, Aug 3, 2020 at 2:28 AM Rohit Kumar <rohitkr@codeaurora.org> wrote:
>> Thanks Rob for reviewing
>>
>> On 7/23/2020 10:46 PM, Rob Herring wrote:
>>> On Wed, Jul 22, 2020 at 04:01:55PM +0530, Rohit kumar wrote:
>>>> Update lpass-cpu binding with yaml formats.
>>>>
>>>> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
>>>> ---
>>>> .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 ---------------
>>>> .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 185 +++++++++++++++++++++
>>>> 2 files changed, 185 insertions(+), 130 deletions(-)
>>>> delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>>>> create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>>>> deleted file mode 100644
>>>> index c21392e..00000000
>>>> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>>>> +++ /dev/null
>>>> @@ -1,130 +0,0 @@
>>>> -* Qualcomm Technologies LPASS CPU DAI
>>>> -
>>>> -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
>>>> -
>>>> -Required properties:
>>>> -
>>>> -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
>>>> - "qcom,lpass-cpu-sc7180"
>>>> -- clocks : Must contain an entry for each entry in clock-names.
>>>> -- clock-names : A list which must include the following entries:
>>>> - * "ahbix-clk"
>>>> - * "mi2s-osr-clk"
>>>> - * "mi2s-bit-clk"
>>>> - : required clocks for "qcom,lpass-cpu-apq8016"
>>>> - * "ahbix-clk"
>>>> - * "mi2s-bit-clk0"
>>>> - * "mi2s-bit-clk1"
>>>> - * "mi2s-bit-clk2"
>>>> - * "mi2s-bit-clk3"
>>>> - * "pcnoc-mport-clk"
>>>> - * "pcnoc-sway-clk"
>>>> - : required clocks for "qcom,lpass-cpu-sc7180"
>>>> - * "audio-core"
>>>> - * "mclk0"
>>>> - * "mi2s-bit-clk0"
>>>> - * "mi2s-bit-clk1"
>>>> - * "pcnoc-sway-clk"
>>>> - * "pcnoc-mport-clk"
>>>> -
>>>> -- interrupts : Must contain an entry for each entry in
>>>> - interrupt-names.
>>>> -- interrupt-names : A list which must include the following entries:
>>>> - * "lpass-irq-lpaif"
>>>> -- pinctrl-N : One property must exist for each entry in
>>>> - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
>>>> - for details of the property values.
>>>> -- pinctrl-names : Must contain a "default" entry.
>>>> -- reg : Must contain an address for each entry in reg-names.
>>>> -- reg-names : A list which must include the following entries:
>>>> - * "lpass-lpaif"
>>>> -- #address-cells : Must be 1
>>>> -- #size-cells : Must be 0
>>>> -
>>>> -
>>>> -
>>>> -Optional properties:
>>>> -
>>>> -- qcom,adsp : Phandle for the audio DSP node
>>>> -
>>>> -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
>>>> -The SD lines to use can be configured by adding subnodes for each of the DAIs.
>>>> -
>>>> -Required properties for each DAI (represented by a subnode):
>>>> -- reg : Must be one of the DAI IDs
>>>> - (usually part of dt-bindings header)
>>>> -- qcom,playback-sd-lines: List of serial data lines to use for playback
>>>> - Each SD line should be represented by a number from 0-3.
>>>> -- qcom,capture-sd-lines : List of serial data lines to use for capture
>>>> - Each SD line should be represented by a number from 0-3.
>>>> -
>>>> -Note that adding a subnode changes the default to "no lines configured",
>>>> -so both playback and capture lines should be configured when a subnode is added.
>>>> -
>>>> -Examples:
>>>> -1)
>>>> -
>>>> -lpass@28100000 {
>>>> - compatible = "qcom,lpass-cpu";
>>>> - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
>>>> - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
>>>> - interrupts = <0 85 1>;
>>>> - interrupt-names = "lpass-irq-lpaif";
>>>> - pinctrl-names = "default", "idle";
>>>> - pinctrl-0 = <&mi2s_default>;
>>>> - pinctrl-1 = <&mi2s_idle>;
>>>> - reg = <0x28100000 0x10000>;
>>>> - reg-names = "lpass-lpaif";
>>>> - qcom,adsp = <&adsp>;
>>>> -
>>>> - #address-cells = <1>;
>>>> - #size-cells = <0>;
>>>> -
>>>> - /* Optional to set different MI2S SD lines */
>>>> - dai@3 {
>>>> - reg = <MI2S_QUATERNARY>;
>>>> - qcom,playback-sd-lines = <0 1>;
>>>> - };
>>>> -};
>>>> -
>>>> -2)
>>>> -
>>>> -#include <dt-bindings/sound/sc7180-lpass.h>
>>>> -
>>>> -lpass_cpu: lpass {
>>>> - compatible = "qcom,lpass-cpu-sc7180";
>>>> -
>>>> - reg = <0 0x62F00000 0 0x29000>;
>>>> -
>>>> - iommus = <&apps_smmu 0x1020 0>;
>>>> -
>>>> - power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
>>>> - clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
>>>> - <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
>>>> - <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
>>>> - <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
>>>> - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
>>>> - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
>>>> - clock-names = "pcnoc-sway-clk", "audio-core",
>>>> - "mclk0", "pcnoc-mport-clk",
>>>> - "mi2s-bit-clk0", "mi2s-bit-clk1";
>>>> - interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
>>>> - interrupt-names = "lpass-irq-lpaif";
>>>> -
>>>> -
>>>> - #sound-dai-cells = <1>;
>>>> -
>>>> - #address-cells = <1>;
>>>> - #size-cells = <0>;
>>>> -
>>>> - mi2s-primary@0 {
>>>> - reg = <MI2S_PRIMARY>;
>>>> - qcom,playback-sd-lines = <1>;
>>>> - qcom,capture-sd-lines = <0>;
>>>> - };
>>>> -
>>>> - mi2s-secondary@1 {
>>>> - reg = <MI2S_SECONDARY>;
>>>> - qcom,playback-sd-lines = <0>;
>>>> - };
>>>> -};
>>>> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>>>> new file mode 100644
>>>> index 00000000..03c598f
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>>>> @@ -0,0 +1,185 @@
>>>> +# SPDX-License-Identifier: GPL-2.0-only
>>> If all the authors are QCom or Linaro please dual license.
>> Ok
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Qualcomm LPASS CPU dai driver bindings
>>>> +
>>>> +maintainers:
>>>> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>>>> + - Rohit kumar <rohitkr@codeaurora.org>
>>>> +
>>>> +description: |
>>>> + Qualcomm SOC Low-Power Audio SubSystem (LPASS) that consist of MI2S interface
>>>> + for audio data transfer on external codecs. LPASS cpu driver is a module to
>>>> + configure Low-Power Audio Interface(LPAIF) core registers across different
>>>> + IP versions.
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + oneOf:
>>>> + - const: qcom,lpass-cpu
>>>> + description: For IPQ806x
>>>> +
>>>> + - const: qcom,apq8016-lpass-cpu
>>>> + description: For APQ8016
>>>> +
>>>> + - const: qcom,lpass-cpu-sc7180
>>>> + description: For SC7180
>>> Use enum rather than oneOf+const
>> Sure
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> + description: LPAIF core registers
>>>> +
>>>> + clocks:
>>>> + minItems: 3
>>>> + maxItems: 6
>>>> +
>>>> + clock-names:
>>>> + minItems: 3
>>>> + maxItems: 6
>>>> +
>>>> + interrupts:
>>>> + maxItems: 1
>>>> + description: LPAIF DMA buffer interrupt
>>>> +
>>>> + qcom,adsp:
>>>> + $ref: /schemas/types.yaml#/definitions/phandle
>>>> + description: Phandle for the audio DSP node
>>>> +
>>>> + iommus:
>>>> + maxItems: 1
>>>> + description: Phandle to apps_smmu node with sid mask
>>>> +
>>>> + power-domains:
>>>> + maxItems: 1
>>>> +
>>>> + '#sound-dai-cells':
>>>> + const: 1
>>>> +
>>>> +patternProperties:
>>>> + "(^mi2s-[0-9a-f]$|mi2s)":
>>>> + type: object
>>>> + description: Required properties for each DAI
>>>> +
>>>> + properties:
>>>> + reg:
>>>> + maxItems: 1
>>>> + description: Must be one of the DAI ID
>>>> +
>>>> + required:
>>>> + - reg
>>>> +
>>>> +
>>> Extra blank line.
>> Ok
>>>> +required:
>>>> + - compatible
>>>> + - reg
>>>> + - clocks
>>>> + - clock-names
>>>> + - interrupts
>>>> + - '#sound-dai-cells'
>>> Add:
>>>
>>> additionalProperties: false
>> If I am adding this, I am getting below error:
>>
>> Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml:
>> lpass@62f00000: '#address-cells', '#size-cells' do not match any of the
>> regexes: '(^mi2s-[0-9a-f]$|mi2s)', 'pinctrl-[0-9]+'
>>
>>
>> I think this is coming because we have not mentioned mi2s-primary@0 in
>> required fields.
>> The field name is variable based on the interface to which peripheral is
>> connected to.
>> It can be either of primary/secondary/tertiary/quaternary. Can you
>> please suggest how to
>> avoid this error?
> No, the error is because you didn't list '#address-cells' and
> '#size-cells' as properties.
Thanks Rob for the input. Posted v5 patches with the change.
>
> Rob

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.

\
 
 \ /
  Last update: 2020-08-05 05:34    [W:1.809 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site