lkml.org 
[lkml]   [2020]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: gadget: aspeed: fixup vhub port irq handling
On Mon, Aug 31, 2020 at 12:54:57PM +0300, Felipe Balbi wrote:
>
> Hi,
>
> Tao Ren <rentao.bupt@gmail.com> writes:
> > On Mon, Aug 17, 2020 at 04:49:32PM +0300, Felipe Balbi wrote:
> >>
> >> Hi,
> >>
> >> rentao.bupt@gmail.com writes:
> >> > From: Tao Ren <rentao.bupt@gmail.com>
> >> >
> >> > This is a follow-on patch for commit a23be4ed8f48 ("usb: gadget: aspeed:
> >> > improve vhub port irq handling"): for_each_set_bit() is replaced with
> >> > simple for() loop because for() loop runs faster on ASPEED BMC.
> >> >
> >> > Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
> >> > ---
> >> > drivers/usb/gadget/udc/aspeed-vhub/core.c | 10 +++-------
> >> > drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 3 +++
> >> > 2 files changed, 6 insertions(+), 7 deletions(-)
> >> >
> >> > diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> >> > index cdf96911e4b1..be7bb64e3594 100644
> >> > --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
> >> > +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> >> > @@ -135,13 +135,9 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
> >> >
> >> > /* Handle device interrupts */
> >> > if (istat & vhub->port_irq_mask) {
> >> > - unsigned long bitmap = istat;
> >> > - int offset = VHUB_IRQ_DEV1_BIT;
> >> > - int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports;
> >> > -
> >> > - for_each_set_bit_from(offset, &bitmap, size) {
> >> > - i = offset - VHUB_IRQ_DEV1_BIT;
> >> > - ast_vhub_dev_irq(&vhub->ports[i].dev);
> >> > + for (i = 0; i < vhub->max_ports; i++) {
> >> > + if (istat & VHUB_DEV_IRQ(i))
> >> > + ast_vhub_dev_irq(&vhub->ports[i].dev);
> >>
> >> how have you measured your statement above? for_each_set_bit() does
> >> exactly what you did. Unless your architecture has an instruction which
> >> helps finds the next set bit (like cls on ARM), which, then, makes it
> >> much faster.
> >
> > I did some testing and result shows for() loop runs faster than
> > for_each_set_bit() loop. Please refer to details below (discussion with
> > Benjamin in the original patch) and kindly let me know your suggestions.
>
> no strong feelings, just surprised that you're already worried about
> 20~40 cycles of cpu time ;-)
>
> Patch applied for next merge window

Thanks Felipe. Ben had some concerns about interrupt handling cost on
AST2400 BMC (ARM9), hence we did the comparison and noticed the small
difference :)


Cheers,

Tao

\
 
 \ /
  Last update: 2020-09-01 01:26    [W:0.061 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site