lkml.org 
[lkml]   [2020]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
Date
Hi,

> -----Original Message-----
> From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Sent: Friday, July 31, 2020 6:37 AM
> To: Shaikh, Azhar <azhar.shaikh@intel.com>
> Cc: bleung@chromium.org; enric.balletbo@collabora.com;
> groeck@chromium.org; pmalani@chromium.org; linux-
> kernel@vger.kernel.org; Patel, Utkarsh H <utkarsh.h.patel@intel.com>;
> Bowman, Casey G <casey.g.bowman@intel.com>; Mani, Rajmohan
> <rajmohan.mani@intel.com>
> Subject: Re: [PATCH] platform/chrome: cros_ec_typec: Avoid setting usb
> role twice during disconnect
>
> Hi,
>
> I guess this is was supposed to be PATCH v2 2/2, right?
>

That is correct.

> On Thu, Jul 30, 2020 at 03:52:57PM -0700, Azhar Shaikh wrote:
> > On disconnect port partner is removed and usb role is set to NONE.
> > But then in cros_typec_port_update() the role is set again.
> > Avoid this by moving usb_role_switch_set_role() to
> > cros_typec_configure_mux().
> >
> > Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
> > Suggested-by: Prashant Malani <pmalani@chromium.org>
>
> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
>
> > ---
> > drivers/platform/chrome/cros_ec_typec.c | 10 +++++++---
> > 1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/platform/chrome/cros_ec_typec.c
> > b/drivers/platform/chrome/cros_ec_typec.c
> > index eb4713b7ae14..df97431b2275 100644
> > --- a/drivers/platform/chrome/cros_ec_typec.c
> > +++ b/drivers/platform/chrome/cros_ec_typec.c
> > @@ -515,6 +515,12 @@ static int cros_typec_configure_mux(struct
> cros_typec_data *typec, int port_num,
> > if (ret)
> > return ret;
> >
> > + ret = usb_role_switch_set_role(typec->ports[port_num]->role_sw,
> > + pd_ctrl->role &
> PD_CTRL_RESP_ROLE_DATA
> > + ? USB_ROLE_HOST : USB_ROLE_DEVICE);
> > + if (ret)
> > + return ret;
> > +
> > if (mux_flags & USB_PD_MUX_TBT_COMPAT_ENABLED) {
> > ret = cros_typec_enable_tbt(typec, port_num, pd_ctrl);
> > } else if (mux_flags & USB_PD_MUX_DP_ENABLED) { @@ -589,9
> +595,7 @@
> > static int cros_typec_port_update(struct cros_typec_data *typec, int
> port_num)
> > if (ret)
> > dev_warn(typec->dev, "Configure muxes failed, err = %d\n",
> ret);
> >
> > - return usb_role_switch_set_role(typec->ports[port_num]-
> >role_sw,
> > - resp.role & PD_CTRL_RESP_ROLE_DATA
> > - ? USB_ROLE_HOST : USB_ROLE_DEVICE);
> > + return ret;
> > }
> >
> > static int cros_typec_get_cmd_version(struct cros_typec_data *typec)
> > --
> > 2.17.1
>
> thanks,
>
> --
> heikki

\
 
 \ /
  Last update: 2020-08-03 17:58    [W:0.192 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site