lkml.org 
[lkml]   [2020]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v2,5/6] reset-controller: ti: Introduce force-update method
Date
Introduce force-update method for assert and deassert interface,
which force the write operation in case the read already happens
to return the correct value.

Signed-off-by: Crystal Guo <crystal.guo@mediatek.com>
---
drivers/reset/reset-ti-syscon.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c
index 1c74bcb9a6c3..f4baf78afd14 100644
--- a/drivers/reset/reset-ti-syscon.c
+++ b/drivers/reset/reset-ti-syscon.c
@@ -57,6 +57,7 @@ struct ti_syscon_reset_data {
struct ti_syscon_reset_control *controls;
unsigned int nr_controls;
bool assert_deassert_together;
+ bool update_force;
};

#define to_ti_syscon_reset_data(rcdev) \
@@ -90,7 +91,10 @@ static int ti_syscon_reset_assert(struct reset_controller_dev *rcdev,
mask = BIT(control->assert_bit);
value = (control->flags & ASSERT_SET) ? mask : 0x0;

- return regmap_update_bits(data->regmap, control->assert_offset, mask, value);
+ if (data->update_force)
+ return regmap_write_bits(data->regmap, control->assert_offset, mask, value);
+ else
+ return regmap_update_bits(data->regmap, control->assert_offset, mask, value);
}

/**
@@ -121,7 +125,10 @@ static int ti_syscon_reset_deassert(struct reset_controller_dev *rcdev,
mask = BIT(control->deassert_bit);
value = (control->flags & DEASSERT_SET) ? mask : 0x0;

- return regmap_update_bits(data->regmap, control->deassert_offset, mask, value);
+ if (data->update_force)
+ return regmap_write_bits(data->regmap, control->deassert_offset, mask, value);
+ else
+ return regmap_update_bits(data->regmap, control->deassert_offset, mask, value);
}

/**
@@ -223,6 +230,10 @@ static int ti_syscon_reset_probe(struct platform_device *pdev)
data->assert_deassert_together = true;
else
data->assert_deassert_together = false;
+ if (of_property_read_bool(np, "update-force"))
+ data->update_force = true;
+ else
+ data->update_force = false;

data->rcdev.ops = &ti_syscon_reset_ops;
data->rcdev.owner = THIS_MODULE;
--
2.18.0
\
 
 \ /
  Last update: 2020-08-03 08:17    [W:1.959 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site