Messages in this thread Patch in this message | | | From | Lad Prabhakar <> | Subject | [PATCH v2 1/4] dt-bindings: media: i2c: ov5640: Document bus-type property | Date | Mon, 3 Aug 2020 15:31:44 +0100 |
| |
Document the possible bus-type's supported by the OV5640 sensor driver.
Also add the bus-type in example node.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- Documentation/devicetree/bindings/media/i2c/ov5640.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt index c97c2f2da12d..00131dbb147e 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt +++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt @@ -36,9 +36,15 @@ Endpoint node required properties for parallel connection are: - data-shift: shall be set to <2> for 8 bits parallel bus (lines 9:2 are used) or <0> for 10 bits parallel bus - hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. + (Required for bus-type 5) - vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. + (Required for bus-type 5) - pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock - signal. + signal. (Required for bus-type 5) +- bus-type: data bus type. Possible values are: + 4 - MIPI CSI-2 D-PHY + 5 - Parallel + 6 - Bt.656 Examples: @@ -86,6 +92,7 @@ Examples: hsync-active = <0>; vsync-active = <0>; pclk-sample = <1>; + bus-type = <5>; }; }; }; -- 2.17.1
| |