lkml.org 
[lkml]   [2020]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 04/90] ath10k: enable transmit data ack RSSI for QCA9884
Date
From: Abhishek Ambure <aambure@codeaurora.org>

commit cc78dc3b790619aa05f22a86a9152986bd73698c upstream.

For all data packets transmitted, host gets htt tx completion event. Some QCA9984
firmware releases support WMI_SERVICE_TX_DATA_ACK_RSSI, which gives data
ack rssi values to host through htt event of data tx completion. Data ack rssi
values are valid if A0 bit is set in HTT rx message. So enable the feature also
for QCA9884.

Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
[kvalo@codeaurora.org: improve commit log]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/net/wireless/ath/ath10k/hw.c | 1 +
1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -1145,6 +1145,7 @@ static bool ath10k_qca99x0_rx_desc_msdu_
const struct ath10k_hw_ops qca99x0_ops = {
.rx_desc_get_l3_pad_bytes = ath10k_qca99x0_rx_desc_get_l3_pad_bytes,
.rx_desc_get_msdu_limit_error = ath10k_qca99x0_rx_desc_msdu_limit_error,
+ .is_rssi_enable = ath10k_htt_tx_rssi_enable,
};

const struct ath10k_hw_ops qca6174_ops = {

\
 
 \ /
  Last update: 2020-08-03 14:45    [W:0.811 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site