lkml.org 
[lkml]   [2020]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] sched: Provide USF for the portable equipment.
On Thu, Jul 30, 2020 at 09:35:43PM +0800, Dongdong Yang wrote:
> From: Dongdong Yang <yangdongdong@xiaomi.com>
>
> The power consumption and UI response are more cared
> for by the portable equipment users. USF(User Sensitive
> Feedback factor) auxiliary cpufreq governor is
> providing more utils adjustment settings to a high
> level by scenario identification.
>
> From the view of portable equipment, screen off status
> usually stands for no request from the user, however,
> the kernel is still expected to notify the user
> in time on modem, network or powerkey events occur.
> In some scenarios, such as listening to music,
> low power processors, such as DSP, take more actions
> and CPU load requirements cut down.  It would bring
> more power consumption benefit if high level have
> interfaces to adjust utils according to the current
> scenario and load.
>
> In addition, the portable equipment user usually heavy
> interact with devices by touch, and other peripherals.
> The boost preemptive counts are marking the load
> requirement urgent, vice versa. If such feedback
> factor could be set to high level according to the
> scenario, it would contribute to the power consumption
> and UI response.
>
> If no USF sysfs inode is set, and no screen on or
> off event, adjust_task_pred_demand shall not be invoked.
> Once sched_usf_up_l0_r/down_r/non_ux_r be set,
> adjust_task_pred_demand_impl shall be called back
> to update settings according to high level scenario
> identification.
>
> We can get about 17% mean power consumption save
> at listening to music with speaker on "screen
> off" scenario, as below statistical data from 7766
> XiaoMi devices for two weeks with
> sched_usf_non_ux_r be set:
>
> day1 day2 day3 day4
> count 7766.000000 7766.000000 7766.000000 7766.000000
> mean 88.035525 85.500282 83.829305 86.054997
> std 111.049980 108.258834 107.562583 108.558240
> min 0.099000 0.037000 0.067000 0.045000
> 25% 34.765500 34.021750 34.101500 34.423000
> 50% 54.950000 55.286500 54.189500 54.248500
> 75% 95.954000 93.942000 91.738000 94.0592500
> 80% 114.675000 107.430000 106.378000 108.673000
> 85% 137.851000 129.511000 127.156500 131.750750
> 90% 179.669000 170.208500 164.027000 172.348000
> 95% 272.395000 257.845500 247.750500 263.275750
> 98% 399.034500 412.170400 391.484000 402.835600
>
> day5 day6 day7 day8
> count 7766.000000 7766.00000 7766.000000 7766.000000
> mean 82.532677 79.21923 77.611380 81.075081
> std 104.870079 101.34819 103.140037 97.506221
> min 0.051000 0.02900 0.007000 0.068000
> 25% 32.873000 33.44400 31.965500 33.863500
> 50% 52.180500 51.56550 50.806500 53.080000
> 75% 90.905750 86.82625 83.859250 89.973000
> 80% 105.455000 99.64700 97.271000 104.225000
> 85% 128.300000 118.47825 116.570250 126.648250
> 90% 166.647500 149.18000 150.649500 161.087000
> 95% 247.208500 224.36050 226.380000 245.291250
> 98% 393.002000 347.92060 369.791800 378.778600
>
> day9 day10 day11 day12
> count 7766.000000 7766.000000 7766.000000 7766.000000
> mean 79.989170 83.859417 78.032930 77.060542
> std 104.226122 108.893043 102.561715 99.844276
> min 0.118000 0.017000 0.028000 0.039000
> 25% 32.056250 33.454500 31.176250 30.897750
> 50% 51.506000 54.056000 48.969500 49.069000
> 75% 88.513500 92.953500 83.506750 84.096000
> 80% 102.876000 107.845000 97.717000 98.073000
> 85% 124.363000 128.288000 118.366500 116.869250
> 90% 160.557000 167.084000 154.342500 148.187500
> 95% 231.149000 242.925750 236.759000 228.131250
> 98% 367.206600 388.619100 385.269100 376.541600
>
> day13 day14
> count 7766.000000 7766.000000
> mean 75.528036 73.702878
> std 90.750594 86.796016
> min 0.066000 0.054000
> 25% 31.170500 31.608500
> 50% 48.758500 49.215000
> 75% 84.522750 83.053000
> 80% 97.879000 94.875000
> 85% 116.680250 113.573750
> 90% 149.083500 144.089500
> 95% 226.177750 211.488750
> 98% 347.011100 331.317100
>
> Signed-off-by: Dongdong Yang <yangdongdong@xiaomi.com>
> Signed-off-by: Jun Tao <taojun@xiaomi.com>
> Signed-off-by: Qiwu Huang <huangqiwu@xiaomi.com>
> Signed-off-by: Geliang Tang <tanggeliang@xiaomi.com>
> Signed-off-by: Peng Wang <rocking@linux.alibaba.com>
> ---
> drivers/staging/Kconfig | 2 +
> drivers/staging/Makefile | 1 +
> drivers/staging/fbsched/Kconfig | 10 ++
> drivers/staging/fbsched/Makefile | 2 +
> drivers/staging/fbsched/usf.c | 351 +++++++++++++++++++++++++++++++++++++++
> kernel/sched/cpufreq_schedutil.c | 11 +-
> 6 files changed, 376 insertions(+), 1 deletion(-)
> create mode 100644 drivers/staging/fbsched/Kconfig
> create mode 100644 drivers/staging/fbsched/Makefile
> create mode 100644 drivers/staging/fbsched/usf.c
>
> diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
> index 4ec5528..05b231e 100644
> --- a/drivers/staging/Kconfig
> +++ b/drivers/staging/Kconfig
> @@ -120,4 +120,6 @@ source "drivers/staging/qlge/Kconfig"
>
> source "drivers/staging/wfx/Kconfig"
>
> +source "drivers/staging/fbsched/Kconfig"
> +
> endif # STAGING
> diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
> index 4d34198..e016ec6 100644
> --- a/drivers/staging/Makefile
> +++ b/drivers/staging/Makefile
> @@ -50,3 +50,4 @@ obj-$(CONFIG_FIELDBUS_DEV) += fieldbus/
> obj-$(CONFIG_KPC2000) += kpc2000/
> obj-$(CONFIG_QLGE) += qlge/
> obj-$(CONFIG_WFX) += wfx/
> +obj-$(CONFIG_SCHED_USF) += fbsched/
> diff --git a/drivers/staging/fbsched/Kconfig b/drivers/staging/fbsched/Kconfig
> new file mode 100644
> index 0000000..954b6af
> --- /dev/null
> +++ b/drivers/staging/fbsched/Kconfig
> @@ -0,0 +1,10 @@
> +config SCHED_USF
> + bool "User Sensitive Factors for Scheduler"
> + depends on CPU_FREQ_GOV_SCHEDUTIL && FB
> + help
> + Select this option to enable the adjustment on the cpufreq with
> + the user sensitive factors on schedule. It is special for portable
> + equipment which more power care and quick response requirement on
> + screen on.
> +
> + If unsure, say N.
> diff --git a/drivers/staging/fbsched/Makefile b/drivers/staging/fbsched/Makefile
> new file mode 100644
> index 0000000..f56aa6c
> --- /dev/null
> +++ b/drivers/staging/fbsched/Makefile
> @@ -0,0 +1,2 @@
> +LINUXINCLUDE += -include $(srctree)/kernel/sched/sched.h
> +obj-$(CONFIG_SCHED_USF) += usf.o
> diff --git a/drivers/staging/fbsched/usf.c b/drivers/staging/fbsched/usf.c
> new file mode 100644
> index 0000000..8582992
> --- /dev/null
> +++ b/drivers/staging/fbsched/usf.c
> @@ -0,0 +1,351 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 XiaoMi Inc.
> + * Author: Yang Dongdong <yangdongdong@xiaomi.com>
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + * See http://www.gnu.org/licenses/gpl-2.0.html for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/kthread.h>
> +#include <linux/cpu.h>
> +#include <linux/sysfs.h>
> +#include <linux/kthread.h>
> +#include <linux/kobject.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/kallsyms.h>
> +#include <linux/debugfs.h>
> +#include <linux/fb.h>
> +#include <linux/notifier.h>
> +
> +#define BOOST_MIN_V -100
> +#define BOOST_MAX_V 100
> +#define LEVEL_TOP 3
> +
> +#define USF_TAG "[usf_sched]"
> +
> +extern void (*adjust_task_pred_demand)(int cpuid,
> + unsigned long *util,
> + struct rq *rq);
> +DEFINE_PER_CPU(unsigned long[PID_MAX_LIMIT], task_hist_nivcsw);
> +
> +static struct {
> + bool is_sched_usf_enabled;
> + int enable_debug;

Make this a bool. Use true false.

> + int is_screen_on;

Bool

> + struct kobject *kobj;
> + struct dentry *debugfs_entry;
> + int sysctl_sched_usf_up_l0;
> + int sysctl_sched_usf_down;
> + int sysctl_sched_usf_non_ux;
> + int usf_up_l0;
> + int usf_down;
> + int usf_non_ux;
> +} usf_vdev;
> +
> +static void adjust_task_pred_demand_impl(int cpuid,
> + unsigned long *util,
> + struct rq *rq)
> +{
> + /* sysctl_sched_latency/sysctl_sched_min_granularity */
> + u32 bl_sw_num = 3;
> +
> + if (!usf_vdev.is_sched_usf_enabled || !rq || !rq->curr)
> + return;
> +
> + if (usf_vdev.is_screen_on) {
> + if (rq->curr->nivcsw >
> + (per_cpu(task_hist_nivcsw, cpuid)[rq->curr->pid]
> + + bl_sw_num + 1)) {
> + (*util) += (*util) >> usf_vdev.usf_up_l0;
> + } else if (rq->curr->nivcsw <
> + (per_cpu(task_hist_nivcsw, cpuid)[rq->curr->pid]
> + + bl_sw_num - 1) && (rq->nr_running < bl_sw_num)) {
> + (*util) >>= usf_vdev.usf_down;
> + }
> + per_cpu(task_hist_nivcsw, cpuid)[rq->curr->pid] =
> + rq->curr->nivcsw;
> + } else if (rq->curr->mm) {
> + (*util) >>= usf_vdev.usf_non_ux;
> + }
> +
> + if (unlikely(usf_vdev.enable_debug))
> + trace_printk
> + ("%s: cpu_id=%d non_ux=%d usf_up=%d usf_down=%d util=%lu\n",
> + USF_TAG, cpuid, usf_vdev.usf_non_ux,
> + usf_vdev.usf_up_l0, usf_vdev.usf_down, *util);
> +}
> +
> +static int usf_lcd_notifier(struct notifier_block *nb,
> + unsigned long val, void *data)
> +{
> + struct fb_event *evdata = data;
> + unsigned int blank;
> +
> + if (!evdata)
> + return 0;
> +
> + if (val != FB_EVENT_BLANK)
> + return 0;
> +
> + if (evdata->data && val == FB_EVENT_BLANK) {
> + blank = *(int *)(evdata->data);
> +
> + switch (blank) {
> + case FB_BLANK_POWERDOWN:
> + usf_vdev.is_screen_on = 0;
> + if (usf_vdev.sysctl_sched_usf_non_ux != 0)
> + adjust_task_pred_demand =
> + &adjust_task_pred_demand_impl;
> + else
> + adjust_task_pred_demand = NULL;
> +
> + break;
> +
> + case FB_BLANK_UNBLANK:
> + usf_vdev.is_screen_on = 1;
> + if (usf_vdev.sysctl_sched_usf_up_l0 != 0 ||
> + usf_vdev.sysctl_sched_usf_down != 0)
> + adjust_task_pred_demand =
> + &adjust_task_pred_demand_impl;
> + else
> + adjust_task_pred_demand = NULL;
> + break;
> + default:
> + break;
> + }
> +
> + usf_vdev.is_sched_usf_enabled = 1;

s/1/true/

> + if (usf_vdev.enable_debug)
> + trace_printk("%s : usf_vdev.is_screen_on:%d\n",
> + __func__, usf_vdev.is_screen_on);
> + }
> + return NOTIFY_OK;
> +}
> +
> +static struct notifier_block usf_lcd_nb = {
> + .notifier_call = usf_lcd_notifier,
> + .priority = INT_MAX,
> +};
> +
> +static ssize_t store_sched_usf_up_l0_r(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t count)
> +{
> + int val = 0;
> + int ret;
> +
> + ret = kstrtoint(buf, 0, &val);
> + if (ret) {
> + pr_err(USF_TAG "set state fail ret=%d\n", ret);

Don't print an error. Just return ret;

> + return ret;
> + }
> +
> + if ((val >= 0) && (val <= BOOST_MAX_V)) {
> + usf_vdev.sysctl_sched_usf_up_l0 = val;
> + usf_vdev.usf_up_l0 = LEVEL_TOP -
> + DIV_ROUND_UP(val, BOOST_MAX_V / 2);
> + } else {
> + pr_err(USF_TAG "%d should fall into [%d %d]",
> + val, 0, BOOST_MAX_V);

Flip this test around and return an error code on invalide input:

if (val < 0 || val > BOOST_MAX_V)
return -EINVAL;

Print an error here if you want.

> + }
> + if ((usf_vdev.sysctl_sched_usf_up_l0 == 0) &&
> + (usf_vdev.sysctl_sched_usf_down == 0))
> + adjust_task_pred_demand = NULL;
> + else
> + adjust_task_pred_demand = &adjust_task_pred_demand_impl;

There needs to be some locking around adjust_task_pred_demand.

> +
> + return count;
> +}
> +
> +static ssize_t store_sched_usf_down_r(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t count)
> +{
> + int val = 0;
> + int ret;
> +
> + ret = kstrtoint(buf, 0, &val);
> + if (ret) {
> + pr_err(USF_TAG "set state fail ret=%d\n", ret);
> + return ret;
> + }
> +
> + if ((val >= BOOST_MIN_V) && (val <= 0)) {
> + usf_vdev.sysctl_sched_usf_down = val;
> + usf_vdev.usf_down = DIV_ROUND_UP(-val, -BOOST_MIN_V / 2);
> + } else {
> + pr_err(USF_TAG "%d should fall into [%d %d]",
> + val, BOOST_MIN_V, 0);

All the same comments as above.

> + }i
> + if ((usf_vdev.sysctl_sched_usf_up_l0 == 0) &&
> + (usf_vdev.sysctl_sched_usf_down == 0))
> + adjust_task_pred_demand = NULL;
> + else
> + adjust_task_pred_demand = &adjust_task_pred_demand_impl;
> +
> + return count;
> +}
> +
> +static ssize_t store_sched_usf_non_ux_r(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t count)
> +{
> + int val = 0;
> + int ret;
> +
> + ret = kstrtoint(buf, 0, &val);
> + if (ret) {
> + pr_err(USF_TAG "set state fail ret=%d\n", ret);
> + return ret;
> + }
> +
> + if ((val >= BOOST_MIN_V) && (val <= 0)) {
> + usf_vdev.sysctl_sched_usf_non_ux = val;
> + usf_vdev.usf_non_ux = DIV_ROUND_UP(-val, -BOOST_MIN_V / 2);
> + } else {
> + pr_err(USF_TAG "%d should fall into [%d %d]",
> + val, BOOST_MIN_V, 0);
> + }
> + if (usf_vdev.sysctl_sched_usf_non_ux == 0)
> + adjust_task_pred_demand = NULL;
> + else
> + adjust_task_pred_demand = &adjust_task_pred_demand_impl;
> +
> + return count;

Same.

> +}
> +
> +#define usf_attr_rw(_name) \
> +static struct kobj_attribute _name = \
> +__ATTR(_name, 0664, show_##_name, store_##_name)
> +
> +#define usf_show_node(_name, _value) \
> +static ssize_t show_##_name \
> +(struct kobject *kobj, struct kobj_attribute *attr, char *buf) \
> +{ \
> + unsigned int len = 0; \
> + unsigned int max_len = 8; \
> + len += \
> + snprintf(buf + len, max_len - len, "%d", \
> + usf_vdev.sysctl_##_value); \
> + return len; \


Just do this:

return sprintf(buf, "%d", usf_vdev.sysctl_##_value);

> +}
> +
> +usf_show_node(sched_usf_up_l0_r, sched_usf_up_l0);
> +usf_show_node(sched_usf_down_r, sched_usf_down);
> +usf_show_node(sched_usf_non_ux_r, sched_usf_non_ux);
> +
> +usf_attr_rw(sched_usf_up_l0_r);
> +usf_attr_rw(sched_usf_down_r);
> +usf_attr_rw(sched_usf_non_ux_r);
> +
> +static struct attribute *sched_attrs[] = {
> + &sched_usf_up_l0_r.attr,
> + &sched_usf_down_r.attr,
> + &sched_usf_non_ux_r.attr,
> + NULL,
> +};
> +
> +static struct attribute_group sched_attr_group = {
> + .attrs = sched_attrs,
> +};
> +
> +static int usf_dbg_get(void *data, u64 *val)
> +{
> + *val = (u64)usf_vdev.enable_debug;
> +
> + return 0;
> +}
> +
> +static int usf_dbg_set(void *data, u64 val)
> +{
> + usf_vdev.enable_debug = !!val;
> + return 0;
> +}
> +
> +DEFINE_SIMPLE_ATTRIBUTE(usf_dbg_fops, usf_dbg_get,
> + usf_dbg_set, "%llu\n");
> +
> +static int __init intera_monitor_init(void)
> +{
> + int res = -1;

Don't initialize this. It just silences uninitialized variable warnings
so it will lead to accidental bugs.

> + struct attribute_group *attr_group;
> +
> + res = fb_register_client(&usf_lcd_nb);
> + if (res < 0) {
> + pr_err("Failed to register usf_lcd_nb!\n");
> + return res;
> + }
> +
> + /*
> + * create a sched_usf in cpu_subsys:
> + * /sys/devices/system/cpu/sched_usf/...
> + */
> + attr_group = &sched_attr_group;
> + usf_vdev.kobj = kobject_create_and_add("sched_usf",
> + &cpu_subsys.dev_root->kobj);
> +
> + if (!usf_vdev.kobj) {
> + pr_err("Failed to create sched_usf!\n");
> + res = -ENOMEM;
> + goto out;
> + } else {

Delete the else. Pull the code in one indent level.

> + res = sysfs_create_group(usf_vdev.kobj, attr_group);
> + if (res) {
> + kobject_put(usf_vdev.kobj);
> + goto out;
> + } else {

Delete this else statement.

> + kobject_uevent(usf_vdev.kobj, KOBJ_ADD);
> + }
> + }
> +
> + usf_vdev.enable_debug = 0;
> + usf_vdev.debugfs_entry = debugfs_create_file("usf_dbg",
> + 0660, NULL, NULL,
> + &usf_dbg_fops);
> + if (!usf_vdev.debugfs_entry)
> + pr_err("Failed to create usf_dbg!\n");

debugfs never returns NULL. Generally debugfs_create_file() returns
are not supposed to be error checked. Just delete the check.

> +
> + usf_vdev.is_sched_usf_enabled = 0;
> + usf_vdev.sysctl_sched_usf_up_l0 = 0;
> + usf_vdev.sysctl_sched_usf_down = 0;
> + usf_vdev.sysctl_sched_usf_non_ux = 0;
> + adjust_task_pred_demand = NULL;


No need to set all these to zero/NULL. It's already zero.

> +
> + return 0;
> +out:
> + fb_unregister_client(&usf_lcd_nb);
> + return res;
> +}
> +
> +module_init(intera_monitor_init);
> +
> +static void __exit intera_monitor_exit(void)
> +{
> + if (usf_vdev.kobj)

Delet this impossible condition.

> + kobject_put(usf_vdev.kobj);
> + if (usf_vdev.debugfs_entry)

Delete this unnecessary condition.

> + debugfs_remove(usf_vdev.debugfs_entry);
> + fb_unregister_client(&usf_lcd_nb);
> + usf_vdev.is_sched_usf_enabled = 0;
> + usf_vdev.sysctl_sched_usf_up_l0 = 0;
> + usf_vdev.sysctl_sched_usf_down = 0;
> + usf_vdev.sysctl_sched_usf_non_ux = 0;
> + adjust_task_pred_demand = NULL;

No need to set all these to zero/NULL.

regards,
dan carpenter

\
 
 \ /
  Last update: 2020-08-03 14:45    [W:0.102 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site