lkml.org 
[lkml]   [2020]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] iio: adc: fsl-imx25-gcq: Replace indio_dev->mlock with own device lock
On Wed, 26 Aug 2020 15:06:09 +0300
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:

> From: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
>
> As part of the general cleanup of indio_dev->mlock, this change replaces
> it with a local lock, to protect against any other accesses during the
> reading of sample. Reading a sample requires multiple consecutive regmap
> operations and a completion callback, so this requires that no other
> read occurs until it completes.
>
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> ---
> drivers/iio/adc/fsl-imx25-gcq.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
> index 8cb51cf7a816..2a56ed0fc793 100644
> --- a/drivers/iio/adc/fsl-imx25-gcq.c
> +++ b/drivers/iio/adc/fsl-imx25-gcq.c
> @@ -38,6 +38,7 @@ struct mx25_gcq_priv {
> struct completion completed;
> struct clk *clk;
> int irq;
> + struct mutex lock;

Rule 1 of locks. Every single one need documentation so that the
scope that the lock protects is clearly stated.

Otherwise patch looks fine to me.

thanks,

Jonathan


> struct regulator *vref[4];
> u32 channel_vref_mv[MX25_NUM_CFGS];
> };
> @@ -137,9 +138,9 @@ static int mx25_gcq_read_raw(struct iio_dev *indio_dev,
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&priv->lock);
> ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val);
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&priv->lock);
> return ret;
>
> case IIO_CHAN_INFO_SCALE:
> @@ -314,6 +315,8 @@ static int mx25_gcq_probe(struct platform_device *pdev)
> return PTR_ERR(priv->regs);
> }
>
> + mutex_init(&priv->lock);
> +
> init_completion(&priv->completed);
>
> ret = mx25_gcq_setup_cfgs(pdev, priv);

\
 
 \ /
  Last update: 2020-08-29 17:30    [W:0.118 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site