lkml.org 
[lkml]   [2020]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT 09/10] arm64: dts: exynos: Correct port of USB-C connector node on Exynos5433 TM2
Date
The USB-C connector bindings require port@0.  Such port was already
described in DTS but outside of the connector itself. Put it into
proper place to fix dtbs_check warnings like:

arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: musb_connector: ports: 'port@0' is a required property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Not tested on HQ. Please kindly review and test.

Best regards,
Krzysztof
---
.../boot/dts/exynos/exynos5433-tm2-common.dtsi | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 6246cce2a15e..bab6c1addd5f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -871,6 +871,13 @@
#address-cells = <1>;
#size-cells = <0>;

+ port@0 {
+ reg = <0>;
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+
port@3 {
reg = <3>;
musb_con_to_mhl: endpoint {
@@ -879,14 +886,6 @@
};
};
};
-
- ports {
- port {
- muic_to_usb: endpoint {
- remote-endpoint = <&usb_to_muic>;
- };
- };
- };
};

regulators {
--
2.17.1
\
 
 \ /
  Last update: 2020-08-29 16:27    [W:0.324 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site