lkml.org 
[lkml]   [2020]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] media: ov7670: check status of ov7670_read
From
Date

On 8/28/20 8:13 AM, Nick Desaulniers wrote:
> On Fri, Aug 28, 2020 at 7:55 AM <trix@redhat.com> wrote:
>> From: Tom Rix <trix@redhat.com>
>>
>> clang static analysis flags this representative problem
>>
>> drivers/media/i2c/ov7670.c:1463:9: warning: Assigned
>> value is garbage or undefined
>> *value = gain;
>> ^ ~~~~
>>
>> gain is set by a successful call to ov7670_read()
> Indeed, it looks like gain is only valid if the return value from
> ov7670_read() is >= 0. Would it be simpler to just initialize gain to
> 0 in ov7670_g_gain?

It looks like ov7670_read() subroutines both convert > 0 returns to 0.

Setting gain, and similar cases, to 0 means it is ok the setting side effect.  maybe it would be ok if this was a void return or there was some known poison value.  I did not look into that.  There are other routines that are more than a simple get() and i wanted to use the same fix for all of them.

yeah on clang static analysis making it into kbuild!  I have been doing these fixes for a couple of months.  with a just-built clang, i run 'scan-build make randomconfig', 'scan-build make', then run scan-view on the html.  the randomconfig accounts for the very scattered fixes i have posted.  generally i would say kernel is doing pretty well, maybe 20 to 1 false to real problems.

Tom

>
> Side question; I'm super happy to see someone sending patches for
> things identified by clang's static analyzer. I'm curious, Tom, how
> did you run it? Did you use the recently landed in kbuild-next
> support for the make target `make clang-analyzer`?
>
>> So check that ov7670_read() is successful.
>>
>> The remaining static analysis problems are false positives.
>> There appears to be a limitation with checking the
>> aggregated returns.
>>
>> Signed-off-by: Tom Rix <trix@redhat.com>
>> ---
>> drivers/media/i2c/ov7670.c | 17 +++++++++++++----
>> 1 file changed, 13 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
>> index b42b289faaef..001d4b09db72 100644
>> --- a/drivers/media/i2c/ov7670.c
>> +++ b/drivers/media/i2c/ov7670.c
>> @@ -929,6 +929,8 @@ static int ov7670_set_hw(struct v4l2_subdev *sd, int hstart, int hstop,
>> ret = ov7670_write(sd, REG_HSTART, (hstart >> 3) & 0xff);
>> ret += ov7670_write(sd, REG_HSTOP, (hstop >> 3) & 0xff);
>> ret += ov7670_read(sd, REG_HREF, &v);
>> + if (ret)
>> + return ret;
>> v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7);
>> msleep(10);
>> ret += ov7670_write(sd, REG_HREF, v);
>> @@ -938,6 +940,8 @@ static int ov7670_set_hw(struct v4l2_subdev *sd, int hstart, int hstop,
>> ret += ov7670_write(sd, REG_VSTART, (vstart >> 2) & 0xff);
>> ret += ov7670_write(sd, REG_VSTOP, (vstop >> 2) & 0xff);
>> ret += ov7670_read(sd, REG_VREF, &v);
>> + if (ret)
>> + return ret;
>> v = (v & 0xf0) | ((vstop & 0x3) << 2) | (vstart & 0x3);
>> msleep(10);
>> ret += ov7670_write(sd, REG_VREF, v);
>> @@ -1460,6 +1464,8 @@ static int ov7670_g_gain(struct v4l2_subdev *sd, __s32 *value)
>> unsigned char gain;
>>
>> ret = ov7670_read(sd, REG_GAIN, &gain);
>> + if (ret)
>> + return ret;
>> *value = gain;
>> return ret;
>> }
>> @@ -1470,11 +1476,14 @@ static int ov7670_s_gain(struct v4l2_subdev *sd, int value)
>> unsigned char com8;
>>
>> ret = ov7670_write(sd, REG_GAIN, value & 0xff);
>> + if (ret)
>> + return ret;
>> /* Have to turn off AGC as well */
>> - if (ret == 0) {
>> - ret = ov7670_read(sd, REG_COM8, &com8);
>> - ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AGC);
>> - }
>> + ret = ov7670_read(sd, REG_COM8, &com8);
>> + if (ret)
>> + return ret;
>> + ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AGC);
>> +
>> return ret;
>> }
>>
>> --
>> 2.18.1
>>
>

\
 
 \ /
  Last update: 2020-08-28 17:37    [W:0.562 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site