Messages in this thread Patch in this message | | | Date | Fri, 28 Aug 2020 11:40:53 +0100 | From | Lee Jones <> | Subject | Re: [PATCH v4 9/9] mfd: mt6360: Merge different sub-devices I2C read/write |
| |
On Mon, 17 Aug 2020, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com> > > Remove unuse register definition.
This should be in a separate patch.
> Merge different sub-devices I2C read/write functions into one Regmap, > because PMIC and LDO part need CRC bits for access protection. > > Signed-off-by: Gene Chen <gene_chen@richtek.com> > --- > drivers/mfd/Kconfig | 1 + > drivers/mfd/mt6360-core.c | 260 +++++++++++++++++++++++++++++++++++++++------ > include/linux/mfd/mt6360.h | 240 ----------------------------------------- > 3 files changed, 226 insertions(+), 275 deletions(-) > delete mode 100644 include/linux/mfd/mt6360.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index a37d7d1..0684ddc 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -913,6 +913,7 @@ config MFD_MT6360 > select MFD_CORE > select REGMAP_I2C > select REGMAP_IRQ > + select CRC8 > depends on I2C > help > Say Y here to enable MT6360 PMU/PMIC/LDO functional support. > diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c > index 677c974..e995220 100644 > --- a/drivers/mfd/mt6360-core.c > +++ b/drivers/mfd/mt6360-core.c > @@ -14,7 +14,53 @@ > #include <linux/regmap.h> > #include <linux/slab.h> > > -#include <linux/mfd/mt6360.h> > +enum { > + MT6360_SLAVE_TCPC = 0, > + MT6360_SLAVE_PMIC, > + MT6360_SLAVE_LDO, > + MT6360_SLAVE_PMU, > + MT6360_SLAVE_MAX, > +}; > + > +struct mt6360_ddata { > + struct i2c_client *i2c[MT6360_SLAVE_MAX]; > + struct device *dev; > + struct regmap *regmap; > + struct regmap_irq_chip_data *irq_data; > + unsigned int chip_rev; > + u8 crc8_tbl[CRC8_TABLE_SIZE]; > +};
This is not a new structure, right? Where was this before? Surely it should be removed from wherever it was in the same patch that places it here?
> +#define MT6360_TCPC_SLAVEID 0x4E > +#define MT6360_PMIC_SLAVEID 0x1A > +#define MT6360_LDO_SLAVEID 0x64 > +#define MT6360_PMU_SLAVEID 0x34 > + > +#define MT6360_REG_TCPCSTART 0x00 > +#define MT6360_REG_TCPCEND 0xFF > +#define MT6360_REG_PMICSTART 0x100 > +#define MT6360_REG_PMICEND 0x13B > +#define MT6360_REG_LDOSTART 0x200 > +#define MT6360_REG_LDOEND 0x21C > +#define MT6360_REG_PMUSTART 0x300 > +#define MT6360_PMU_DEV_INFO 0x300 > +#define MT6360_PMU_CHG_IRQ1 0x3D0 > +#define MT6360_PMU_CHG_MASK1 0x3F0 > +#define MT6360_REG_PMUEND 0x3FF > + > +#define MT6360_PMU_IRQ_REGNUM 16 > + > +#define CHIP_VEN_MASK 0xF0 > +#define CHIP_VEN_MT6360 0x50 > +#define CHIP_REV_MASK 0x0F > + > +#define MT6360_ADDRESS_MASK 0x3F > +#define MT6360_DATA_SIZE_1_BYTE 0x00 > +#define MT6360_DATA_SIZE_2_BYTES 0x40 > +#define MT6360_DATA_SIZE_3_BYTES 0x80 > +#define MT6360_DATA_SIZE_4_BYTES 0xC0 > + > +#define MT6360_CRC8_POLYNOMIAL 0x7 > > /* reg 0 -> 0 ~ 7 */ > #define MT6360_CHG_TREG_EVT 4 > @@ -220,12 +266,6 @@ static const struct regmap_irq_chip mt6360_irq_chip = { > .use_ack = true, > }; > > -static const struct regmap_config mt6360_pmu_regmap_config = { > - .reg_bits = 8, > - .val_bits = 8, > - .max_register = MT6360_PMU_MAXREG, > -}; > - > static const struct resource mt6360_adc_resources[] = { > DEFINE_RES_IRQ_NAMED(MT6360_ADC_DONEI, "adc_donei"), > }; > @@ -303,7 +343,7 @@ static int mt6360_check_vendor_info(struct mt6360_ddata *ddata) > return ret; > > if ((info & CHIP_VEN_MASK) != CHIP_VEN_MT6360) { > - dev_err(&client->dev, "Device not supported\n"); > + dev_err(ddata->dev, "Device not supported\n"); > return -ENODEV; > } > > @@ -312,11 +352,163 @@ static int mt6360_check_vendor_info(struct mt6360_ddata *ddata) > return 0; > } > > -static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = { > - MT6360_PMU_SLAVEID, > +static const u16 mt6360_slave_addrs[MT6360_SLAVE_MAX] = {
Why are you changing the data type?
> + MT6360_TCPC_SLAVEID, > MT6360_PMIC_SLAVEID, > MT6360_LDO_SLAVEID, > - MT6360_TCPC_SLAVEID, > + MT6360_PMU_SLAVEID, > +}; > + > +static int mt6360_xlate_pmicldo_addr(u8 *addr, int rw_size) > +{ > + /* Address is already in encoded [5:0] */ > + *addr &= MT6360_ADDRESS_MASK; > + > + switch (rw_size) { > + case 1: > + *addr |= MT6360_DATA_SIZE_1_BYTE; > + break; > + case 2: > + *addr |= MT6360_DATA_SIZE_2_BYTES; > + break; > + case 3: > + *addr |= MT6360_DATA_SIZE_3_BYTES; > + break; > + case 4: > + *addr |= MT6360_DATA_SIZE_4_BYTES; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int mt6360_regmap_read(void *context, const void *reg, size_t reg_size, > + void *val, size_t val_size) > +{ > + struct mt6360_ddata *ddata = context; > + u8 bank = *(u8 *)reg, reg_addr = *(u8 *)(reg + 1);
This is messy. Put them on separate lines.
> + struct i2c_client *i2c = ddata->i2c[bank]; > + bool crc_needed = false; > + u8 *buf; > + /* first two is i2c_addr + reg_addr , last is crc8 */
First two what?
> + int alloc_size = 2 + val_size + 1, read_size = val_size;
Put these on separate lines also please.
'alloc_size' should probably be 'buf_len'.
Please define the magic numbers.
> + u8 crc; > + int ret; > + > + if (bank == MT6360_SLAVE_PMIC || bank == MT6360_SLAVE_LDO) { > + crc_needed = true; > + ret = mt6360_xlate_pmicldo_addr(®_addr, val_size); > + if (ret < 0) > + return ret; > + read_size += 1; > + } > + > + buf = kzalloc(alloc_size, GFP_KERNEL); > + if (!buf) > + return -ENOMEM; > + > + /* 7 bit slave addr + read bit */ > + buf[0] = ((i2c->addr & 0x7f) << 1) + 1;
Please define these magic numbers.
> + buf[1] = reg_addr; > + > + ret = i2c_smbus_read_i2c_block_data(i2c, reg_addr, read_size, buf + 2);
Why plus 2? Maybe define it.
> + if (ret == read_size) { > + memcpy(val, buf + 2, val_size);
As above.
> + if (crc_needed) { > + crc = crc8(ddata->crc8_tbl, buf, val_size + 2, 0); > + if (crc != buf[val_size + 2]) > + ret = -EIO; > + } > + } > + > + kfree(buf); > + > + if (ret < 0) > + return ret; > + else if (ret != read_size) > + return -EIO; > + > + return 0;
I think this reads better (be sure to check the semantics):
ret = i2c_smbus_read_i2c_block_data(i2c, reg_addr, read_size, buf + 2); if (ret < 0) goto out; if (ret != read_size) { ret -EIO; goto out; }
memcpy(val, buf + 2, val_size); if (crc_needed) { crc = crc8(ddata->crc8_tbl, buf, val_size + 2, 0); if (crc != buf[val_size + 2]) ret = -EIO; }
out: kfree(buf); return 0;
> +} > + > +static int mt6360_regmap_write(void *context, const void *val, size_t val_size) > +{ > + struct mt6360_ddata *ddata = context; > + u8 bank = *(u8 *)val, reg_addr = *(u8 *)(val + 1); > + struct i2c_client *i2c = ddata->i2c[bank]; > + bool crc_needed = false; > + u8 *buf; > + /* first two is i2c_addr + reg_addr , last crc8 + dummy */ > + int alloc_size = 2 + val_size + 2, write_size = val_size - 2; > + int ret;
Same comments as above.
> + if (bank == MT6360_SLAVE_PMIC || bank == MT6360_SLAVE_LDO) { > + crc_needed = true; > + ret = mt6360_xlate_pmicldo_addr(®_addr, val_size - 2); > + if (ret < 0) > + return ret; > + } > + > + buf = kzalloc(alloc_size, GFP_KERNEL); > + if (!buf) > + return -ENOMEM; > + > + /* 7 bit slave addr + write bit */ > + buf[0] = ((i2c->addr & 0x7f) << 1); > + buf[1] = reg_addr; > + /* val need to minus regaddr 16bit */ > + memcpy(buf + 2, val + 2, write_size); > + > + if (crc_needed) { > + buf[val_size] = crc8(ddata->crc8_tbl, buf, val_size, 0); > + write_size += 2; > + } > + > + ret = i2c_smbus_write_i2c_block_data(i2c, reg_addr, write_size, buf + 2);
No check for (ret == write_size)?
> + kfree(buf); > + > + if (ret < 0) > + return ret; > + > + return 0;
How about:
ret = i2c_smbus_write_i2c_block_data(i2c, reg_addr, write_size, buf + 2); if (ret > 0) ret = 0;
kfree(buf); return ret;
> +} > + > +static const struct regmap_bus mt6360_regmap_bus = { > + .read = mt6360_regmap_read, > + .write = mt6360_regmap_write, > + > + /* due to pmic and ldo crc access size limit */
"Due to PMIC and LDO CRC access ..."
> + .max_raw_read = 4, > + .max_raw_write = 4, > +}; > + > +static bool mt6360_is_readwrite_reg(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case MT6360_REG_TCPCSTART ... MT6360_REG_TCPCEND: > + fallthrough; > + case MT6360_REG_PMICSTART ... MT6360_REG_PMICEND: > + fallthrough; > + case MT6360_REG_LDOSTART ... MT6360_REG_LDOEND: > + fallthrough; > + case MT6360_REG_PMUSTART ... MT6360_REG_PMUEND: > + return true; > + } > + > + return false; > +} > + > +static const struct regmap_config mt6360_regmap_config = { > + .reg_bits = 16, > + .val_bits = 8, > + .reg_format_endian = REGMAP_ENDIAN_BIG, > + .max_register = MT6360_REG_PMUEND, > + .writeable_reg = mt6360_is_readwrite_reg, > + .readable_reg = mt6360_is_readwrite_reg, > }; > > static int mt6360_probe(struct i2c_client *client) > @@ -329,9 +521,23 @@ static int mt6360_probe(struct i2c_client *client) > return -ENOMEM; > > ddata->dev = &client->dev; > - i2c_set_clientdata(client, ddata); > > - ddata->regmap = devm_regmap_init_i2c(client, &mt6360_pmu_regmap_config); > + for (i = 0; i < MT6360_SLAVE_MAX - 1; i++) { > + ddata->i2c[i] = devm_i2c_new_dummy_device(&client->dev, > + client->adapter, > + mt6360_slave_addrs[i]); > + if (IS_ERR(ddata->i2c[i])) { > + dev_err(&client->dev, > + "Failed to get new dummy I2C device for address 0x%x", > + mt6360_slave_addrs[i]); > + return PTR_ERR(ddata->i2c[i]);
Do you have to free the new devices you just allocated?
> + } > + } > + ddata->i2c[MT6360_SLAVE_MAX - 1] = client; > + > + crc8_populate_msb(ddata->crc8_tbl, MT6360_CRC8_POLYNOMIAL); > + ddata->regmap = __devm_regmap_init(ddata->dev, &mt6360_regmap_bus, ddata, > + &mt6360_regmap_config, NULL, NULL);
Why "__devm_*"? Isn't that an internal function?
> if (IS_ERR(ddata->regmap)) { > dev_err(&client->dev, "Failed to register regmap\n"); > return PTR_ERR(ddata->regmap); > @@ -341,34 +547,18 @@ static int mt6360_probe(struct i2c_client *client) > if (ret) > return ret; > > - ret = devm_regmap_add_irq_chip(&client->dev, ddata->regmap, client->irq, > - 0, 0, &mt6360_irq_chip, > - &ddata->irq_data); > + ret = devm_regmap_add_irq_chip(&client->dev, ddata->regmap, client->irq, 0, 0, > + &mt6360_irq_chip, &ddata->irq_data); > if (ret) { > dev_err(&client->dev, "Failed to add Regmap IRQ Chip\n"); > return ret; > } > > - ddata->i2c[0] = client; > - for (i = 1; i < MT6360_SLAVE_MAX; i++) { > - ddata->i2c[i] = devm_i2c_new_dummy_device(&client->dev, > - client->adapter, > - mt6360_slave_addr[i]); > - if (IS_ERR(ddata->i2c[i])) { > - dev_err(&client->dev, > - "Failed to get new dummy I2C device for address 0x%x", > - mt6360_slave_addr[i]); > - return PTR_ERR(ddata->i2c[i]); > - } > - i2c_set_clientdata(ddata->i2c[i], ddata); > - } > - > - ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, > - mt6360_devs, ARRAY_SIZE(mt6360_devs), NULL, > - 0, regmap_irq_get_domain(ddata->irq_data)); > + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, mt6360_devs, > + ARRAY_SIZE(mt6360_devs), NULL, 0, > + regmap_irq_get_domain(ddata->irq_data)); > if (ret) { > - dev_err(&client->dev, > - "Failed to register subordinate devices\n"); > + dev_err(&client->dev, "Failed to register subordinate devices\n"); > return ret; > } > > diff --git a/include/linux/mfd/mt6360.h b/include/linux/mfd/mt6360.h > deleted file mode 100644 > index da0fb5c..0000000 > --- a/include/linux/mfd/mt6360.h > +++ /dev/null > @@ -1,240 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0 */ > -/* > - * Copyright (c) 2020 MediaTek Inc. > - */ > - > -#ifndef __MT6360_H__ > -#define __MT6360_H__ > - > -#include <linux/regmap.h> > - > -enum { > - MT6360_SLAVE_PMU = 0, > - MT6360_SLAVE_PMIC, > - MT6360_SLAVE_LDO, > - MT6360_SLAVE_TCPC, > - MT6360_SLAVE_MAX, > -}; > - > -#define MT6360_PMU_SLAVEID 0x34 > -#define MT6360_PMIC_SLAVEID 0x1A > -#define MT6360_LDO_SLAVEID 0x64 > -#define MT6360_TCPC_SLAVEID 0x4E > - > -struct mt6360_data { > - struct i2c_client *i2c[MT6360_SLAVE_MAX]; > - struct device *dev; > - struct regmap *regmap; > - struct regmap_irq_chip_data *irq_data; > - unsigned int chip_rev; > -}; > - > -/* PMU register defininition */ > -#define MT6360_PMU_DEV_INFO 0x00 > -#define MT6360_PMU_CORE_CTRL1 0x01 > -#define MT6360_PMU_RST1 0x02 > -#define MT6360_PMU_CRCEN 0x03 > -#define MT6360_PMU_RST_PAS_CODE1 0x04 > -#define MT6360_PMU_RST_PAS_CODE2 0x05 > -#define MT6360_PMU_CORE_CTRL2 0x06 > -#define MT6360_PMU_TM_PAS_CODE1 0x07 > -#define MT6360_PMU_TM_PAS_CODE2 0x08 > -#define MT6360_PMU_TM_PAS_CODE3 0x09 > -#define MT6360_PMU_TM_PAS_CODE4 0x0A > -#define MT6360_PMU_IRQ_IND 0x0B > -#define MT6360_PMU_IRQ_MASK 0x0C > -#define MT6360_PMU_IRQ_SET 0x0D > -#define MT6360_PMU_SHDN_CTRL 0x0E > -#define MT6360_PMU_TM_INF 0x0F > -#define MT6360_PMU_I2C_CTRL 0x10 > -#define MT6360_PMU_CHG_CTRL1 0x11 > -#define MT6360_PMU_CHG_CTRL2 0x12 > -#define MT6360_PMU_CHG_CTRL3 0x13 > -#define MT6360_PMU_CHG_CTRL4 0x14 > -#define MT6360_PMU_CHG_CTRL5 0x15 > -#define MT6360_PMU_CHG_CTRL6 0x16 > -#define MT6360_PMU_CHG_CTRL7 0x17 > -#define MT6360_PMU_CHG_CTRL8 0x18 > -#define MT6360_PMU_CHG_CTRL9 0x19 > -#define MT6360_PMU_CHG_CTRL10 0x1A > -#define MT6360_PMU_CHG_CTRL11 0x1B > -#define MT6360_PMU_CHG_CTRL12 0x1C > -#define MT6360_PMU_CHG_CTRL13 0x1D > -#define MT6360_PMU_CHG_CTRL14 0x1E > -#define MT6360_PMU_CHG_CTRL15 0x1F > -#define MT6360_PMU_CHG_CTRL16 0x20 > -#define MT6360_PMU_CHG_AICC_RESULT 0x21 > -#define MT6360_PMU_DEVICE_TYPE 0x22 > -#define MT6360_PMU_QC_CONTROL1 0x23 > -#define MT6360_PMU_QC_CONTROL2 0x24 > -#define MT6360_PMU_QC30_CONTROL1 0x25 > -#define MT6360_PMU_QC30_CONTROL2 0x26 > -#define MT6360_PMU_USB_STATUS1 0x27 > -#define MT6360_PMU_QC_STATUS1 0x28 > -#define MT6360_PMU_QC_STATUS2 0x29 > -#define MT6360_PMU_CHG_PUMP 0x2A > -#define MT6360_PMU_CHG_CTRL17 0x2B > -#define MT6360_PMU_CHG_CTRL18 0x2C > -#define MT6360_PMU_CHRDET_CTRL1 0x2D > -#define MT6360_PMU_CHRDET_CTRL2 0x2E > -#define MT6360_PMU_DPDN_CTRL 0x2F > -#define MT6360_PMU_CHG_HIDDEN_CTRL1 0x30 > -#define MT6360_PMU_CHG_HIDDEN_CTRL2 0x31 > -#define MT6360_PMU_CHG_HIDDEN_CTRL3 0x32 > -#define MT6360_PMU_CHG_HIDDEN_CTRL4 0x33 > -#define MT6360_PMU_CHG_HIDDEN_CTRL5 0x34 > -#define MT6360_PMU_CHG_HIDDEN_CTRL6 0x35 > -#define MT6360_PMU_CHG_HIDDEN_CTRL7 0x36 > -#define MT6360_PMU_CHG_HIDDEN_CTRL8 0x37 > -#define MT6360_PMU_CHG_HIDDEN_CTRL9 0x38 > -#define MT6360_PMU_CHG_HIDDEN_CTRL10 0x39 > -#define MT6360_PMU_CHG_HIDDEN_CTRL11 0x3A > -#define MT6360_PMU_CHG_HIDDEN_CTRL12 0x3B > -#define MT6360_PMU_CHG_HIDDEN_CTRL13 0x3C > -#define MT6360_PMU_CHG_HIDDEN_CTRL14 0x3D > -#define MT6360_PMU_CHG_HIDDEN_CTRL15 0x3E > -#define MT6360_PMU_CHG_HIDDEN_CTRL16 0x3F > -#define MT6360_PMU_CHG_HIDDEN_CTRL17 0x40 > -#define MT6360_PMU_CHG_HIDDEN_CTRL18 0x41 > -#define MT6360_PMU_CHG_HIDDEN_CTRL19 0x42 > -#define MT6360_PMU_CHG_HIDDEN_CTRL20 0x43 > -#define MT6360_PMU_CHG_HIDDEN_CTRL21 0x44 > -#define MT6360_PMU_CHG_HIDDEN_CTRL22 0x45 > -#define MT6360_PMU_CHG_HIDDEN_CTRL23 0x46 > -#define MT6360_PMU_CHG_HIDDEN_CTRL24 0x47 > -#define MT6360_PMU_CHG_HIDDEN_CTRL25 0x48 > -#define MT6360_PMU_BC12_CTRL 0x49 > -#define MT6360_PMU_CHG_STAT 0x4A > -#define MT6360_PMU_RESV1 0x4B > -#define MT6360_PMU_TYPEC_OTP_TH_SEL_CODEH 0x4E > -#define MT6360_PMU_TYPEC_OTP_TH_SEL_CODEL 0x4F > -#define MT6360_PMU_TYPEC_OTP_HYST_TH 0x50 > -#define MT6360_PMU_TYPEC_OTP_CTRL 0x51 > -#define MT6360_PMU_ADC_BAT_DATA_H 0x52 > -#define MT6360_PMU_ADC_BAT_DATA_L 0x53 > -#define MT6360_PMU_IMID_BACKBST_ON 0x54 > -#define MT6360_PMU_IMID_BACKBST_OFF 0x55 > -#define MT6360_PMU_ADC_CONFIG 0x56 > -#define MT6360_PMU_ADC_EN2 0x57 > -#define MT6360_PMU_ADC_IDLE_T 0x58 > -#define MT6360_PMU_ADC_RPT_1 0x5A > -#define MT6360_PMU_ADC_RPT_2 0x5B > -#define MT6360_PMU_ADC_RPT_3 0x5C > -#define MT6360_PMU_ADC_RPT_ORG1 0x5D > -#define MT6360_PMU_ADC_RPT_ORG2 0x5E > -#define MT6360_PMU_BAT_OVP_TH_SEL_CODEH 0x5F > -#define MT6360_PMU_BAT_OVP_TH_SEL_CODEL 0x60 > -#define MT6360_PMU_CHG_CTRL19 0x61 > -#define MT6360_PMU_VDDASUPPLY 0x62 > -#define MT6360_PMU_BC12_MANUAL 0x63 > -#define MT6360_PMU_CHGDET_FUNC 0x64 > -#define MT6360_PMU_FOD_CTRL 0x65 > -#define MT6360_PMU_CHG_CTRL20 0x66 > -#define MT6360_PMU_CHG_HIDDEN_CTRL26 0x67 > -#define MT6360_PMU_CHG_HIDDEN_CTRL27 0x68 > -#define MT6360_PMU_RESV2 0x69 > -#define MT6360_PMU_USBID_CTRL1 0x6D > -#define MT6360_PMU_USBID_CTRL2 0x6E > -#define MT6360_PMU_USBID_CTRL3 0x6F > -#define MT6360_PMU_FLED_CFG 0x70 > -#define MT6360_PMU_RESV3 0x71 > -#define MT6360_PMU_FLED1_CTRL 0x72 > -#define MT6360_PMU_FLED_STRB_CTRL 0x73 > -#define MT6360_PMU_FLED1_STRB_CTRL2 0x74 > -#define MT6360_PMU_FLED1_TOR_CTRL 0x75 > -#define MT6360_PMU_FLED2_CTRL 0x76 > -#define MT6360_PMU_RESV4 0x77 > -#define MT6360_PMU_FLED2_STRB_CTRL2 0x78 > -#define MT6360_PMU_FLED2_TOR_CTRL 0x79 > -#define MT6360_PMU_FLED_VMIDTRK_CTRL1 0x7A > -#define MT6360_PMU_FLED_VMID_RTM 0x7B > -#define MT6360_PMU_FLED_VMIDTRK_CTRL2 0x7C > -#define MT6360_PMU_FLED_PWSEL 0x7D > -#define MT6360_PMU_FLED_EN 0x7E > -#define MT6360_PMU_FLED_Hidden1 0x7F > -#define MT6360_PMU_RGB_EN 0x80 > -#define MT6360_PMU_RGB1_ISNK 0x81 > -#define MT6360_PMU_RGB2_ISNK 0x82 > -#define MT6360_PMU_RGB3_ISNK 0x83 > -#define MT6360_PMU_RGB_ML_ISNK 0x84 > -#define MT6360_PMU_RGB1_DIM 0x85 > -#define MT6360_PMU_RGB2_DIM 0x86 > -#define MT6360_PMU_RGB3_DIM 0x87 > -#define MT6360_PMU_RESV5 0x88 > -#define MT6360_PMU_RGB12_Freq 0x89 > -#define MT6360_PMU_RGB34_Freq 0x8A > -#define MT6360_PMU_RGB1_Tr 0x8B > -#define MT6360_PMU_RGB1_Tf 0x8C > -#define MT6360_PMU_RGB1_TON_TOFF 0x8D > -#define MT6360_PMU_RGB2_Tr 0x8E > -#define MT6360_PMU_RGB2_Tf 0x8F > -#define MT6360_PMU_RGB2_TON_TOFF 0x90 > -#define MT6360_PMU_RGB3_Tr 0x91 > -#define MT6360_PMU_RGB3_Tf 0x92 > -#define MT6360_PMU_RGB3_TON_TOFF 0x93 > -#define MT6360_PMU_RGB_Hidden_CTRL1 0x94 > -#define MT6360_PMU_RGB_Hidden_CTRL2 0x95 > -#define MT6360_PMU_RESV6 0x97 > -#define MT6360_PMU_SPARE1 0x9A > -#define MT6360_PMU_SPARE2 0xA0 > -#define MT6360_PMU_SPARE3 0xB0 > -#define MT6360_PMU_SPARE4 0xC0 > -#define MT6360_PMU_CHG_IRQ1 0xD0 > -#define MT6360_PMU_CHG_IRQ2 0xD1 > -#define MT6360_PMU_CHG_IRQ3 0xD2 > -#define MT6360_PMU_CHG_IRQ4 0xD3 > -#define MT6360_PMU_CHG_IRQ5 0xD4 > -#define MT6360_PMU_CHG_IRQ6 0xD5 > -#define MT6360_PMU_QC_IRQ 0xD6 > -#define MT6360_PMU_FOD_IRQ 0xD7 > -#define MT6360_PMU_BASE_IRQ 0xD8 > -#define MT6360_PMU_FLED_IRQ1 0xD9 > -#define MT6360_PMU_FLED_IRQ2 0xDA > -#define MT6360_PMU_RGB_IRQ 0xDB > -#define MT6360_PMU_BUCK1_IRQ 0xDC > -#define MT6360_PMU_BUCK2_IRQ 0xDD > -#define MT6360_PMU_LDO_IRQ1 0xDE > -#define MT6360_PMU_LDO_IRQ2 0xDF > -#define MT6360_PMU_CHG_STAT1 0xE0 > -#define MT6360_PMU_CHG_STAT2 0xE1 > -#define MT6360_PMU_CHG_STAT3 0xE2 > -#define MT6360_PMU_CHG_STAT4 0xE3 > -#define MT6360_PMU_CHG_STAT5 0xE4 > -#define MT6360_PMU_CHG_STAT6 0xE5 > -#define MT6360_PMU_QC_STAT 0xE6 > -#define MT6360_PMU_FOD_STAT 0xE7 > -#define MT6360_PMU_BASE_STAT 0xE8 > -#define MT6360_PMU_FLED_STAT1 0xE9 > -#define MT6360_PMU_FLED_STAT2 0xEA > -#define MT6360_PMU_RGB_STAT 0xEB > -#define MT6360_PMU_BUCK1_STAT 0xEC > -#define MT6360_PMU_BUCK2_STAT 0xED > -#define MT6360_PMU_LDO_STAT1 0xEE > -#define MT6360_PMU_LDO_STAT2 0xEF > -#define MT6360_PMU_CHG_MASK1 0xF0 > -#define MT6360_PMU_CHG_MASK2 0xF1 > -#define MT6360_PMU_CHG_MASK3 0xF2 > -#define MT6360_PMU_CHG_MASK4 0xF3 > -#define MT6360_PMU_CHG_MASK5 0xF4 > -#define MT6360_PMU_CHG_MASK6 0xF5 > -#define MT6360_PMU_QC_MASK 0xF6 > -#define MT6360_PMU_FOD_MASK 0xF7 > -#define MT6360_PMU_BASE_MASK 0xF8 > -#define MT6360_PMU_FLED_MASK1 0xF9 > -#define MT6360_PMU_FLED_MASK2 0xFA > -#define MT6360_PMU_FAULTB_MASK 0xFB > -#define MT6360_PMU_BUCK1_MASK 0xFC > -#define MT6360_PMU_BUCK2_MASK 0xFD > -#define MT6360_PMU_LDO_MASK1 0xFE > -#define MT6360_PMU_LDO_MASK2 0xFF > -#define MT6360_PMU_MAXREG MT6360_PMU_LDO_MASK2 > - > -/* MT6360_PMU_IRQ_SET */ > -#define MT6360_PMU_IRQ_REGNUM 16 > -#define MT6360_IRQ_RETRIG BIT(2) > - > -#define CHIP_VEN_MASK 0xF0 > -#define CHIP_VEN_MT6360 0x50 > -#define CHIP_REV_MASK 0x0F > - > -#endif /* __MT6360_H__ */
-- Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog
| |