lkml.org 
[lkml]   [2020]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] extcon: ptn5150: Set the VBUS and POLARITY property state
From
Date
Hi,

On 27/8/2020 1:35 pm, Chanwoo Choi wrote:
> Hi,
>
> On 8/27/20 2:17 PM, Ramuthevar, Vadivel MuruganX wrote:
>> Hi,
>>
>> On 27/8/2020 12:51 pm, Chanwoo Choi wrote:
>>> Hi,
>>>
>>> You better to change the 'state' word to 'capability'.
>>> Actually, this patch doesn't change the value of property.
>>> It set the capability value of property.
>>>
>>> "Set the VBUS and POLARITY property capability"
>> Thank you for the review comments, sure will update.
>>>
>>> On 8/27/20 12:56 PM, Ramuthevar,Vadivel MuruganX wrote:
>>>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>>>>
>>>> Set the VBUS and POLARITY property state.
>>>
>>> ditto. Need to change the work from 'state' and 'capability'.
>> Noted.
>>>
>>>>
>>>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>>>> ---
>>>>   drivers/extcon/extcon-ptn5150.c | 6 ++++++
>>>>   1 file changed, 6 insertions(+)
>>>>
>>>> diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
>>>> index 8b930050a3f1..b5217a61615c 100644
>>>> --- a/drivers/extcon/extcon-ptn5150.c
>>>> +++ b/drivers/extcon/extcon-ptn5150.c
>>>> @@ -279,6 +279,12 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
>>>>           return ret;
>>>>       }
>>>>   +    extcon_set_property_capability(info->edev, EXTCON_USB,
>>>> +                       EXTCON_PROP_USB_VBUS);
>>>> +    extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
>>>> +                       EXTCON_PROP_USB_VBUS);
>>>> +    extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
>>>> +                       EXTCON_PROP_USB_TYPEC_POLARITY);
>>>
>>> Need to add blank line.
>> Noted.
>>>
>>> I understood that you set the property capability
>>> because of get_flipped() function of your patch[1].
>>>
>>> But, I think that you need to change the value of EXTCON_PROP_USB_TYPEC_POLARITY
>>> when changing the state of EXTCON_USB_HOST. The polarity property value is always
>>> zero regardless of EXTCON_USB_HOST state as following: The get_flipped()[1] returns
>>> always the same *flipped value.
>>>
>>>     EXTCON_USB_HOST is 1, EXTCON_PROP_USB_TYPEC_POLARITY is 0
>>>     EXTCON_USB_HOST is 0, EXTCON_PROP_USB_TYPEC_POLARITY is 0
>> by default EXTCON_PROP_USB_TYPEC_POLARITY is 1
>
> If you don't touch the value of EXTCON_PROP_USB_TYPEC_POLARITY property,
> EXTCON_PROP_USB_TYPEC_POLARITY has default value (0).
Ok, thanks!
will update the patch, send it.

Regards
Vadivel
>
>>>
>>> If EXTCON_PROP_USB_TYPEC_POLARITY value is not related to any behavior,
>>> you don't need to get the property value from extcon consumer driver
>>> like drivers/phy/phy-lgm-usb.c.
>>>
>>> Actually, I don't understand why you don't handle the value
>>> of EXTCON_PROP_USB_TYPEC_POLARITY.
>>>
>>> Or, are there any case of what drivers/phy/phy-lgm-usb.c
>>> uses the different extcon device with EXTCON_PROP_USB_TYPEC_POLARITY property
>>> in the future?
>> Yes, you're right, user connect the different USB cable then we check polarity, accordingly driver proceeds, thanks!
>
> OK.
>
>>>
>>> So, do you set the EXTCON_PROP_USB_TYPEC_POLARITY capability
>>> for the extensibility in order to use other extcon device on later?
>> yes, that might be the case as well.
>
> OK.
>
>>>
>>>
>>> [1] https://protect2.fireeye.com/v1/url?k=1fb29698-422c0d72-1fb31dd7-0cc47a6cba04-3009aa7184024984&q=1&e=566e4565-e7db-4a90-b036-fc28dbdb742f&u=https%3A%2F%2Fwww.spinics.net%2Flists%2Fdevicetree%2Fmsg371828.html
>>> +static int get_flipped(struct tca_apb *ta, bool *flipped)
>>> +{
>>> +    union extcon_property_value property;
>>> +    int ret;
>>> +
>>> +    ret = extcon_get_property(ta->phy.edev, EXTCON_USB_HOST,
>>> +                  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
>>> +    if (ret) {
>>> +        dev_err(ta->phy.dev, "no polarity property from extcon\n");
>>> +        return ret;
>>> +    }
>>> +
>>> +    *flipped = property.intval;
>>> +
>>> +    return ret;
>>> +}
>> Thank you for the gone through my usb-phy patch as well
>>
>> Regards
>> Vadivel
>>>
>>>
>>>>       /* Initialize PTN5150 device and print vendor id and version id */
>>>>       ret = ptn5150_init_dev_type(info);
>>>>       if (ret)
>>>>
>>>
>>>
>>
>>
>
>

\
 
 \ /
  Last update: 2020-08-27 08:12    [W:0.049 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site