lkml.org 
[lkml]   [2020]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v3 2/2] net: phy: DP83822: Add ability to advertise Fiber connection
On Thu, Aug 27, 2020 at 08:45:09AM -0500, Dan Murphy wrote:
> The DP83822 can be configured to use a Fiber connection. The strap
> register is read to determine if the device has been configured to use
> a fiber connection. With the fiber connection the PHY can be configured
> to detect whether the fiber connection is active by either a high signal
> or a low signal.
>
> Fiber mode is only applicable to the DP83822 so rework the PHY match
> table so that non-fiber PHYs can still use the same driver but not call
> or use any of the fiber features.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2020-08-27 22:18    [W:0.066 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site