lkml.org 
[lkml]   [2020]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] PCI: Introduce flag for detached virtual functions
Re the subject line, this patch does a lot more than just "introduce a
flag"; AFAICT it actually enables important VFIO functionality, e.g.,
something like:

vfio/pci: Enable MMIO access for s390 detached VFs

On Thu, Aug 13, 2020 at 11:40:43AM -0400, Matthew Rosato wrote:
> s390x has the notion of providing VFs to the kernel in a manner
> where the associated PF is inaccessible other than via firmware.
> These are not treated as typical VFs and access to them is emulated
> by underlying firmware which can still access the PF. After
> the referened commit however these detached VFs were no longer able
> to work with vfio-pci as the firmware does not provide emulation of
> the PCI_COMMAND_MEMORY bit. In this case, let's explicitly recognize
> these detached VFs so that vfio-pci can allow memory access to
> them again.

Out of curiosity, in what sense is the PF inaccessible? Is it
*impossible* for Linux to access the PF, or is it just not enumerated
by clp_list_pci() so Linux doesn't know about it?

VFs do not implement PCI_COMMAND, so I guess "firmware does not
provide emulation of PCI_COMMAND_MEMORY" means something like "we
can't access the PF so we can't enable/disable PCI_COMMAND_MEMORY"?

s/referened/referenced/

> Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
> ---
> arch/s390/pci/pci_bus.c | 13 +++++++++++++
> drivers/vfio/pci/vfio_pci_config.c | 8 ++++----
> include/linux/pci.h | 4 ++++
> 3 files changed, 21 insertions(+), 4 deletions(-)
>
> diff --git a/arch/s390/pci/pci_bus.c b/arch/s390/pci/pci_bus.c
> index 642a993..1b33076 100644
> --- a/arch/s390/pci/pci_bus.c
> +++ b/arch/s390/pci/pci_bus.c
> @@ -184,6 +184,19 @@ static inline int zpci_bus_setup_virtfn(struct zpci_bus *zbus,
> }
> #endif
>
> +void pcibios_bus_add_device(struct pci_dev *pdev)
> +{
> + struct zpci_dev *zdev = to_zpci(pdev);
> +
> + /*
> + * If we have a VF on a non-multifunction bus, it must be a VF that is
> + * detached from its parent PF. We rely on firmware emulation to
> + * provide underlying PF details.

What exactly does "multifunction bus" mean? I'm familiar with
multi-function *devices*, but not multi-function buses.

> + */
> + if (zdev->vfn && !zdev->zbus->multifunction)
> + pdev->detached_vf = 1;
> +}
> +
> static int zpci_bus_add_device(struct zpci_bus *zbus, struct zpci_dev *zdev)
> {
> struct pci_bus *bus;
> diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
> index d98843f..98f93d1 100644
> --- a/drivers/vfio/pci/vfio_pci_config.c
> +++ b/drivers/vfio/pci/vfio_pci_config.c
> @@ -406,7 +406,7 @@ bool __vfio_pci_memory_enabled(struct vfio_pci_device *vdev)
> * PF SR-IOV capability, there's therefore no need to trigger
> * faults based on the virtual value.
> */
> - return pdev->is_virtfn || (cmd & PCI_COMMAND_MEMORY);
> + return dev_is_vf(&pdev->dev) || (cmd & PCI_COMMAND_MEMORY);

I'm not super keen on the idea of having two subtly different ways of
identifying VFs. I think that will be confusing. This seems to be
the critical line, so whatever we do here, it will be out of the
ordinary and probably deserves a little comment.

If Linux doesn't see the PF, does pci_physfn(VF) return NULL, i.e., is
VF->physfn NULL?

> }
>
> /*
> @@ -420,7 +420,7 @@ static void vfio_bar_restore(struct vfio_pci_device *vdev)
> u16 cmd;
> int i;
>
> - if (pdev->is_virtfn)
> + if (dev_is_vf(&pdev->dev))
> return;
>
> pci_info(pdev, "%s: reset recovery - restoring BARs\n", __func__);
> @@ -521,7 +521,7 @@ static int vfio_basic_config_read(struct vfio_pci_device *vdev, int pos,
> count = vfio_default_config_read(vdev, pos, count, perm, offset, val);
>
> /* Mask in virtual memory enable for SR-IOV devices */
> - if (offset == PCI_COMMAND && vdev->pdev->is_virtfn) {
> + if ((offset == PCI_COMMAND) && (dev_is_vf(&vdev->pdev->dev))) {
> u16 cmd = le16_to_cpu(*(__le16 *)&vdev->vconfig[PCI_COMMAND]);
> u32 tmp_val = le32_to_cpu(*val);
>
> @@ -1713,7 +1713,7 @@ int vfio_config_init(struct vfio_pci_device *vdev)
> vdev->rbar[5] = le32_to_cpu(*(__le32 *)&vconfig[PCI_BASE_ADDRESS_5]);
> vdev->rbar[6] = le32_to_cpu(*(__le32 *)&vconfig[PCI_ROM_ADDRESS]);
>
> - if (pdev->is_virtfn) {
> + if (dev_is_vf(&pdev->dev)) {
> *(__le16 *)&vconfig[PCI_VENDOR_ID] = cpu_to_le16(pdev->vendor);
> *(__le16 *)&vconfig[PCI_DEVICE_ID] = cpu_to_le16(pdev->device);
>
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 8355306..7c062de 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -445,6 +445,7 @@ struct pci_dev {
> unsigned int is_probed:1; /* Device probing in progress */
> unsigned int link_active_reporting:1;/* Device capable of reporting link active */
> unsigned int no_vf_scan:1; /* Don't scan for VFs after IOV enablement */
> + unsigned int detached_vf:1; /* VF without local PF access */
> pci_dev_flags_t dev_flags;
> atomic_t enable_cnt; /* pci_enable_device has been called */
>
> @@ -1057,6 +1058,8 @@ struct resource *pci_find_parent_resource(const struct pci_dev *dev,
> void pci_sort_breadthfirst(void);
> #define dev_is_pci(d) ((d)->bus == &pci_bus_type)
> #define dev_is_pf(d) ((dev_is_pci(d) ? to_pci_dev(d)->is_physfn : false))
> +#define dev_is_vf(d) ((dev_is_pci(d) ? (to_pci_dev(d)->is_virtfn || \
> + to_pci_dev(d)->detached_vf) : false))
>
> /* Generic PCI functions exported to card drivers */
>
> @@ -1764,6 +1767,7 @@ static inline struct pci_dev *pci_get_domain_bus_and_slot(int domain,
>
> #define dev_is_pci(d) (false)
> #define dev_is_pf(d) (false)
> +#define dev_is_vf(d) (false)
> static inline bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags)
> { return false; }
> static inline int pci_irqd_intx_xlate(struct irq_domain *d,
> --
> 1.8.3.1
>

\
 
 \ /
  Last update: 2020-08-27 20:31    [W:0.077 / U:1.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site