lkml.org 
[lkml]   [2020]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RESEND PATCH v3 5/8] mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel
From
Date
On 26.08.20 14:18, Vignesh Raghavendra wrote:
>
>
> On 8/26/20 3:42 PM, Jan Kiszka wrote:
>> On 24.08.20 19:20, Jan Kiszka wrote:
>>> On 24.08.20 14:49, Jan Kiszka wrote:
>>>> On 24.08.20 13:45, Vignesh Raghavendra wrote:
>>>>>
>>>>>
>>>>> On 8/22/20 11:35 PM, Jan Kiszka wrote:
>>>>>> On 01.06.20 09:04, Vignesh Raghavendra wrote:
>>>>>>> dma_request_chan_by_mask() can throw EPROBE_DEFER if DMA provider
>>>>>>> is not yet probed. Currently driver just falls back to using PIO mode
>>>>>>> (which is less efficient) in this case. Instead return probe deferral
>>>>>>> error as is so that driver will be re probed once DMA provider is
>>>>>>> available.
>>>>>>>
>>>>>>> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
>>>>>>> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>>>>>>> ---
>>>>> [...]
>>>>>>>
>>>>>>> static const struct spi_nor_controller_ops cqspi_controller_ops = {
>>>>>>> @@ -1269,8 +1274,11 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
>>>>>>> dev_dbg(nor->dev, "using direct mode for %s\n",
>>>>>>> mtd->name);
>>>>>>>
>>>>>>> - if (!cqspi->rx_chan)
>>>>>>> - cqspi_request_mmap_dma(cqspi);
>>>>>>> + if (!cqspi->rx_chan) {
>>>>>>> + ret = cqspi_request_mmap_dma(cqspi);
>>>>>>> + if (ret == -EPROBE_DEFER)
>>>>>>> + goto err;
>>>>>>> + }
>>>>>>> }
>>>>>>> }
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> This seem to break reading the SPI flash on our IOT2050 [1] (didn't test
>>>>>> the eval board yet).
>>>>>>
>>>>>> Without that commit, read happens via PIO, and that works. With the
>>>>>> commit, the pattern
>>>>>>
>>>>>> with open("out.bin", "wb") as out:
>>>>>> pos = 0
>>>>>> while pos < 2:
>>>>>> with open("/dev/mtd0", "rb") as mtd:
>>>>>> mtd.seek(pos * 0x10000)
>>>>>> out.write(mtd.read(0x10000))
>>>>>> pos += 1
>>>>>>
>>>>>> gives the wrong result for the second block while
>>>>>
>>>>> Interesting... Could you please explain wrong result? Is the data move
>>>>> around or completely garbage?
>>>>
>>>> It looks like some stripes contain data from other parts of the flash or
>>>> kernel RAM. It's not just garbage, there are readable strings included.
>>>>
>>>>>
>>>>> Does this fail even on AM654 EVM? Could you share full script for me to
>>>>> test locally?
>>>>
>>>> The scripts are complete (python). Just binary-diff the outputs.
>>>>
>>>> I'll try on the EVM later.
>>>
>>> Done so now, could reproduce.
>>
>> ..."could *not* reproduce" there. Sorry if that caused confusion.
>>
>
> Oh, thanks! I was wondering why I cannot see this issue on AM654 EVM at my end...
>
>>>
>>> But the OSPIs are definitely different. EVM reports
>>>
>>> spi-nor spi0.0: mt35xu512aba (65536 Kbytes)
>>>
>>> with 4K erase size. Our our board, we have
>>>
>>> spi-nor spi7.0: w25q128 (16384 Kbytes)
>>>
>>> with 64K erase size.
>>>
>>> Here is some extract of the hex-diffs between out.bin and out2.bin (the
>>> latter being the good one):
>>>
>>> --- /dev/fd/63 2020-08-24 17:16:58.776409282 +0000
>>> +++ /dev/fd/62 2020-08-24 17:16:58.776409282 +0000
>>> @@ -6,18 +6,18 @@
>>> 00000050 0f 30 0d 06 03 55 04 07 0c 06 44 61 6c 6c 61 73 |.0...U....Dallas|
>>> 00000060 31 27 30 25 06 03 55 04 0a 0c 1e 54 65 78 61 73 |1'0%..U....Texas|
>>> 00000070 20 49 6e 73 74 72 75 6d 65 6e 74 73 20 49 6e 63 | Instruments Inc|
>>> -00000080 84 8b 96 2c 0c 12 18 03 01 05 05 04 01 02 00 00 |...,............|
>>> -00000090 07 06 44 45 20 01 0d 14 2a 01 00 32 05 24 30 48 |..DE ...*..2.$0H|
>>> -000000a0 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 |`l0.............|
>>> -000000b0 01 00 00 0f ac 02 0c 00 2d 1a 6f 18 17 ff ff ff |........-.o.....|
>>> +00000080 6f 72 70 6f 72 61 74 65 64 31 13 30 11 06 03 55 |orporated1.0...U|
>>> +00000090 04 0b 0c 0a 50 72 6f 63 65 73 73 6f 72 73 31 13 |....Processors1.|
>>> +000000a0 30 11 06 03 55 04 03 0c 0a 54 49 20 73 75 70 70 |0...U....TI supp|
>>> +000000b0 6f 72 74 31 1d 30 1b 06 09 2a 86 48 86 f7 0d 01 |ort1.0...*.H....|
>>> 000000c0 09 01 16 0e 73 75 70 70 6f 72 74 40 74 69 2e 63 |....support@ti.c|
>>> 000000d0 6f 6d 30 1e 17 0d 32 30 30 37 32 32 31 31 30 30 |om0...2007221100|
>>> 000000e0 30 30 5a 17 0d 32 30 30 38 32 31 31 31 30 30 30 |00Z..20082111000|
>>> 000000f0 30 5a 30 81 9d 31 0b 30 09 06 03 55 04 06 13 02 |0Z0..1.0...U....|
>>> -00000100 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 b4 96 |..'...BC^.b2/...|
>>> -00000110 24 44 0c 00 c6 00 43 0a 00 00 0b f0 43 a5 2a 01 |$D....C.....C.*.|
>>> -00000120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
>>> -*
>>> +00000100 55 53 31 0b 30 09 06 03 55 04 08 0c 02 54 58 31 |US1.0...U....TX1|
>>> +00000110 0f 30 0d 06 03 55 04 07 0c 06 44 61 6c 6c 61 73 |.0...U....Dallas|
>>> +00000120 31 27 30 25 06 03 55 04 0a 0c 1e 54 65 78 61 73 |1'0%..U....Texas|
>>> +00000130 20 49 6e 73 74 72 75 6d 65 6e 74 73 20 49 6e 63 | Instruments Inc|
>>> 00000140 6f 72 70 6f 72 61 74 65 64 31 13 30 11 06 03 55 |orporated1.0...U|
>>> 00000150 04 0b 0c 0a 50 72 6f 63 65 73 73 6f 72 73 31 13 |....Processors1.|
>>> 00000160 30 11 06 03 55 04 03 0c 0a 54 49 20 73 75 70 70 |0...U....TI supp|
>>>
>>> [...]
>>>
>>> 000017a0 02 8a e5 06 c8 8c e2 14 c2 8a e5 7c 01 00 ea ed |...........|....|
>>> 000017b0 1f 8f e2 66 02 00 ea 5b 45 72 72 6f 72 5d 20 52 |...f...[Error] R|
>>> -000017c0 69 64 20 55 54 43 20 49 44 21 21 21 0a 00 00 5b |id UTC ID!!!...[|
>>> -000017d0 45 72 72 6f 72 5d 20 49 6e 76 61 6c 69 64 20 50 |Error] Invalid P|
>>> -000017e0 65 65 72 20 43 68 61 6e 6e 65 6c 20 4e 75 6d 62 |eer Channel Numb|
>>> -000017f0 65 72 21 21 21 0a 00 41 73 73 65 72 74 69 6f 6e |er!!!..Assertion|
>>> +000017c0 4d 20 41 6c 6c 6f 63 20 54 58 20 43 68 20 66 61 |M Alloc TX Ch fa|
>>> +000017d0 69 6c 65 64 21 21 21 0a 00 00 00 73 72 63 2f 75 |iled!!!....src/u|
>>> +000017e0 64 6d 61 5f 63 68 2e 63 00 00 00 75 74 63 49 6e |dma_ch.c...utcIn|
>>> +000017f0 66 6f 20 21 3d 20 4e 55 4c 4c 5f 50 54 52 00 75 |fo != NULL_PTR.u|
>>> 00001800 74 63 49 64 20 3c 3d 20 55 44 4d 41 5f 4e 55 4d |tcId <= UDMA_NUM|
>>> 00001810 5f 55 54 43 5f 49 4e 53 54 41 4e 43 45 00 00 72 |_UTC_INSTANCE..r|
>>>
>>
>> I've done [1] for now in order to make the OSPI usable again here. It
>> looks like reading an mtd device in one chunk (single read syscall) is
>> fine, ie. "dd if=/dev/mtd3 of=content2 bs=<sizeof-mtd3>", while reading
>> it in multiple chunks is problematic, e.g. "dd if=/dev/mtd3 of=content2
>> bs=4096". Interestingly, the deviation is already on the first block,
>> which may speak against a setup issue for a second transfer.
>
> I cannot think of a reasonable explanation for this. I wonder how the first chunk
> gets affected when reading in multiple chunks.
>
>>
>> The content I've seen in the corrupted output may come from other parts
>> of the memory. I've found my WIFI SSID there, which is definitely not
>> part of our OSPI image.
>>
>
> Hmm, one guess it that QSPI on IoT board is 16MB and hence

It is 16M, true.

> does not support 4 byte addressing vs the OSPI on AM654 EVM.
> There could be bug around that case.
>
> So, could you apply diff [1] on linux-next and then execute
> falling testcase and post the register dump printed?
>
> [1]:
>

Apparently always this:

[ 197.602226] cadence-qspi 47040000.spi: REG off 0: val 80083881
[ 197.608181] cadence-qspi 47040000.spi: REG off 1: val 3
[ 197.613512] cadence-qspi 47040000.spi: REG off 2: val 2
[ 197.618833] cadence-qspi 47040000.spi: REG off 3: val a0a0a0a
[ 197.624677] cadence-qspi 47040000.spi: REG off 4: val 5
[ 197.629998] cadence-qspi 47040000.spi: REG off 5: val 101002
[ 197.635759] cadence-qspi 47040000.spi: REG off 6: val 80
[ 197.641165] cadence-qspi 47040000.spi: REG off 7: val 0
[ 197.646488] cadence-qspi 47040000.spi: REG off 8: val 0
[ 197.651809] cadence-qspi 47040000.spi: REG off 9: val 0

>
> ---><8---
>
>
> diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
> index 508b219eabf80..b9739ae919340 100644
> --- a/drivers/spi/spi-cadence-quadspi.c
> +++ b/drivers/spi/spi-cadence-quadspi.c
> @@ -907,6 +907,10 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
> struct dma_async_tx_descriptor *tx;
> dma_cookie_t cookie;
> dma_addr_t dma_dst;
> + int i;
> +
> + for (i = 0; i < 10; i++)
> + dev_err(dev, "REG off %x: val %x\n", i, readl(cqspi->iobase + (i << 2)));
>
> if (!cqspi->rx_chan || !virt_addr_valid(buf)) {
> memcpy_fromio(buf, cqspi->ahb_base + from, len);
>
>
> Also, there seems to be DMA mapping related issue, that was always present in
> older driver as well. Could you see if diff [2] fixes the issue?
>
> [2] Use DMA device for mapping:
>
> ---><8---
>
>
> diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
> index b9739ae919340..a546aa4598758 100644
> --- a/drivers/spi/spi-cadence-quadspi.c
> +++ b/drivers/spi/spi-cadence-quadspi.c
> @@ -901,6 +901,7 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
> {
> struct cqspi_st *cqspi = f_pdata->cqspi;
> struct device *dev = &cqspi->pdev->dev;
> + struct device *ddev = cqspi->rx_chan->device->dev;
> enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
> dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from;
> int ret = 0;
> @@ -917,8 +918,8 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
> return 0;
> }
>
> - dma_dst = dma_map_single(dev, buf, len, DMA_FROM_DEVICE);
> - if (dma_mapping_error(dev, dma_dst)) {
> + dma_dst = dma_map_single(ddev, buf, len, DMA_FROM_DEVICE);
> + if (dma_mapping_error(ddev, dma_dst)) {
> dev_err(dev, "dma mapping failed\n");
> return -ENOMEM;
> }
> @@ -952,7 +953,7 @@ static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata,
> }
>
> err_unmap:
> - dma_unmap_single(dev, dma_dst, len, DMA_FROM_DEVICE);
> + dma_unmap_single(ddev, dma_dst, len, DMA_FROM_DEVICE);
>
> return ret;
> }
>

That seems to help! Wasn't able to reproduce the issue with this applied
so far.

Thanks,
Jan

--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux

\
 
 \ /
  Last update: 2020-08-26 15:33    [W:0.100 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site