lkml.org 
[lkml]   [2020]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] arm64: split counter validation function
Date
In order for the counter validation function to be reused, split
validate_cpu_freq_invariance_counters() into:
- freq_counters_valid(cpu) - check cpu for valid cycle counters
- freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate) -
generic function that sets the normalization ratio used by
topology_scale_freq_tick()

Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
---
arch/arm64/kernel/topology.c | 46 +++++++++++++++++++++++-------------
1 file changed, 29 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
index 1241087e92c8..edc44b46e34f 100644
--- a/arch/arm64/kernel/topology.c
+++ b/arch/arm64/kernel/topology.c
@@ -150,46 +150,51 @@ void update_freq_counters_refs(void)
this_cpu_write(arch_const_cycles_prev, read_constcnt());
}

-static int validate_cpu_freq_invariance_counters(int cpu)
+static inline bool freq_counters_valid(int cpu)
{
const struct cpumask *cnt_cpu_mask = cpus_with_amu_counters();
- u64 max_freq_hz, ratio;

if (!cnt_cpu_mask || !cpumask_test_cpu(cpu, cnt_cpu_mask)) {
pr_debug("CPU%d: counters are not supported.\n", cpu);
- return -EINVAL;
+ return false;
}

if (unlikely(!per_cpu(arch_const_cycles_prev, cpu) ||
!per_cpu(arch_core_cycles_prev, cpu))) {
pr_debug("CPU%d: cycle counters are not enabled.\n", cpu);
- return -EINVAL;
+ return false;
}

- /* Convert maximum frequency from KHz to Hz and validate */
- max_freq_hz = cpufreq_get_hw_max_freq(cpu) * 1000;
- if (unlikely(!max_freq_hz)) {
- pr_debug("CPU%d: invalid maximum frequency.\n", cpu);
+ return true;
+}
+
+static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
+{
+ u64 ratio;
+
+ if (unlikely(!max_rate || !ref_rate)) {
+ pr_debug("CPU%d: invalid maximum or reference frequency.\n",
+ cpu);
return -EINVAL;
}

/*
* Pre-compute the fixed ratio between the frequency of the constant
- * counter and the maximum frequency of the CPU.
+ * reference counter and the maximum frequency of the CPU.
*
- * const_freq
- * arch_max_freq_scale = ---------------- * SCHED_CAPACITY_SCALE²
- * cpuinfo_max_freq
+ * ref_rate
+ * arch_max_freq_scale = ---------- * SCHED_CAPACITY_SCALE²
+ * max_rate
*
* We use a factor of 2 * SCHED_CAPACITY_SHIFT -> SCHED_CAPACITY_SCALE²
* in order to ensure a good resolution for arch_max_freq_scale for
- * very low arch timer frequencies (down to the KHz range which should
+ * very low reference frequencies (down to the KHz range which should
* be unlikely).
*/
- ratio = (u64)arch_timer_get_rate() << (2 * SCHED_CAPACITY_SHIFT);
- ratio = div64_u64(ratio, max_freq_hz);
+ ratio = ref_rate << (2 * SCHED_CAPACITY_SHIFT);
+ ratio = div64_u64(ratio, max_rate);
if (!ratio) {
- WARN_ONCE(1, "System timer frequency too low.\n");
+ WARN_ONCE(1, "Reference frequency too low.\n");
return -EINVAL;
}

@@ -224,6 +229,7 @@ static int __init init_amu_fie(void)
{
cpumask_var_t valid_cpus;
bool have_policy = false;
+ u64 max_rate_hz;
int ret = 0;
int cpu;

@@ -236,8 +242,14 @@ static int __init init_amu_fie(void)
}

for_each_present_cpu(cpu) {
- if (validate_cpu_freq_invariance_counters(cpu))
+ if (!freq_counters_valid(cpu))
continue;
+
+ max_rate_hz = cpufreq_get_hw_max_freq(cpu) * 1000;
+ if (freq_inv_set_max_ratio(cpu, max_rate_hz,
+ arch_timer_get_rate()))
+ continue;
+
cpumask_set_cpu(cpu, valid_cpus);
have_policy |= enable_policy_freq_counters(cpu, valid_cpus);
}
--
2.17.1
\
 
 \ /
  Last update: 2020-08-26 15:05    [W:0.076 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site