lkml.org 
[lkml]   [2020]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH RFC v6 1/6] dt-bindings: display: add Unisoc's drm master bindings
Sam Ravnborg <sam@ravnborg.org> 于2020年7月29日周三 上午4:27写道:
>
> Hi Kevin
>
> On Tue, Jul 28, 2020 at 06:07:54PM +0800, Kevin Tang wrote:
> > From: Kevin Tang <kevin.tang@unisoc.com>
> >
> > The Unisoc DRM master device is a virtual device needed to list all
> > DPU devices or other display interface nodes that comprise the
> > graphics subsystem
> >
> > Cc: Orson Zhai <orsonzhai@gmail.com>
> > Cc: Chunyan Zhang <zhang.lyra@gmail.com>
> > Signed-off-by: Kevin Tang <kevin.tang@unisoc.com>
> > ---
> > .../devicetree/bindings/display/sprd/drm.yaml | 36 ++++++++++++++++++++++
> > 1 file changed, 36 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/sprd/drm.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/sprd/drm.yaml b/Documentation/devicetree/bindings/display/sprd/drm.yaml
> > new file mode 100644
> > index 0000000..b5792c0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/sprd/drm.yaml
> drm seems like a sub-optimal name.
> How about usign the compatible name "display-subsystem" as it is a bit
> more specific (but not good).
You're right, maybe "sprd,drm.yaml" or "sprd-drm.yaml" will be better
>
> > @@ -0,0 +1,36 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> Any chance this can be (GPL-2.0-only OR BSD-2-Clause).
> I noticed that for example clock/sprd,sc9863a-clk.yaml uses this license
> so I hope this is OK.
I will add GPL-2.0-only to it.
>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/sprd/drm.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Unisoc DRM master device
> > +
> > +maintainers:
> > + - Mark Rutland <mark.rutland@arm.com>
> > +
> > +description: |
> > + The Unisoc DRM master device is a virtual device needed to list all
> > + DPU devices or other display interface nodes that comprise the
> > + graphics subsystem.
> > +
> > +properties:
> > + compatible:
> > + const: sprd,display-subsystem
> > +
> > + ports:
> > + description:
> > + Should contain a list of phandles pointing to display interface port
> > + of DPU devices.
> Add type - like this:
> $ref: /schemas/types.yaml#/definitions/phandle-array
>
> See for example display/rockchip/rockchip-drm.yaml
>
> Any specific reason why this is not a ports node like used by many other
> display bindings?
> In other words - I think this is too simple.
We only support one display pipeline now, other interface, like
DP(DisplayPort), HDMI...will be add later...

ports:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: |
Should contain a list of phandles pointing to display interface port
of dpu devices.. dpu definitions as defined in
Documentation/devicetree/bindings/display/sprd/sprd,dpu.yaml


>
> > +
> > +required:
> > + - compatible
> > + - ports
> > +
>
> Add:
> additionalProperties: false
>
> so we catch if other properties sneak in.
>
> > +examples:
> > + - |
> > + display-subsystem {
> > + compatible = "sprd,display-subsystem";
> > + ports = <&dpu_out>;
> > + };
> > +
> > --
> > 2.7.4
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel

\
 
 \ /
  Last update: 2020-08-26 19:12    [W:1.745 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site