lkml.org 
[lkml]   [2020]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] dt-bindings: usb: Convert cdns-usb3.txt to YAML schema
Date
Converts cdns-usb3.txt to YAML schema cdns,usb3.yaml

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
.../devicetree/bindings/usb/cdns,usb3.yaml | 89 +++++++++++++++++++
.../devicetree/bindings/usb/cdns-usb3.txt | 45 ----------
2 files changed, 89 insertions(+), 45 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/cdns,usb3.yaml
delete mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt

diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
new file mode 100644
index 000000000000..7bc0263accee
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cdns,usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence USBSS-DRD controller bindings
+
+maintainers:
+ - Pawel Laszczak <pawell@cadence.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: cdns,usb3
+
+ reg:
+ items:
+ - description: OTG controller registers
+ - description: XHCI Host controller registers
+ - description: DEVICE controller registers
+
+ reg-names:
+ items:
+ - const: otg
+ - const: xhci
+ - const: dev
+
+ interrupts:
+ items:
+ - description: OTG/DRD controller interrupt
+ - description: XHCI host controller interrupt
+ - description: Device controller interrupt
+
+ interrupt-names:
+ items:
+ - const: host
+ - const: peripheral
+ - const: otg
+
+ dr_mode:
+ enum: [host, otg, peripheral]
+
+ maximum-speed:
+ enum: [super-speed, high-speed, full-speed]
+
+ phys:
+ minItems: 1
+ maxItems: 2
+
+ phy-names:
+ minItems: 1
+ maxItems: 2
+
+ cdns,on-chip-buff-size:
+ description:
+ size of memory intended as internal memory for endpoints
+ buffers expressed in KB
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb@6000000 {
+ compatible = "cdns,usb3";
+ reg = <0x00 0x6000000 0x00 0x10000>,
+ <0x00 0x6010000 0x00 0x10000>,
+ <0x00 0x6020000 0x00 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host", "peripheral", "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
deleted file mode 100644
index b7dc606d37b5..000000000000
--- a/Documentation/devicetree/bindings/usb/cdns-usb3.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Binding for the Cadence USBSS-DRD controller
-
-Required properties:
- - reg: Physical base address and size of the controller's register areas.
- Controller has 3 different regions:
- - HOST registers area
- - DEVICE registers area
- - OTG/DRD registers area
- - reg-names - register memory area names:
- "xhci" - for HOST registers space
- "dev" - for DEVICE registers space
- "otg" - for OTG/DRD registers space
- - compatible: Should contain: "cdns,usb3"
- - interrupts: Interrupts used by cdns3 controller:
- "host" - interrupt used by XHCI driver.
- "peripheral" - interrupt used by device driver
- "otg" - interrupt used by DRD/OTG part of driver
-
-Optional properties:
- - maximum-speed : valid arguments are "super-speed", "high-speed" and
- "full-speed"; refer to usb/generic.txt
- - dr_mode: Should be one of "host", "peripheral" or "otg".
- - phys: reference to the USB PHY
- - phy-names: from the *Generic PHY* bindings;
- Supported names are:
- - cdns3,usb2-phy
- - cdns3,usb3-phy
-
- - cdns,on-chip-buff-size : size of memory intended as internal memory for endpoints
- buffers expressed in KB
-
-Example:
- usb@f3000000 {
- compatible = "cdns,usb3";
- interrupts = <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_USB_IRQ 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host", "peripheral", "otg";
- reg = <0xf3000000 0x10000>, /* memory area for HOST registers */
- <0xf3010000 0x10000>, /* memory area for DEVICE registers */
- <0xf3020000 0x10000>; /* memory area for OTG/DRD registers */
- reg-names = "xhci", "dev", "otg";
- phys = <&usb2_phy>, <&usb3_phy>;
- phy-names = "cdns3,usb2-phy", "cnds3,usb3-phy";
- };
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
\
 
 \ /
  Last update: 2020-08-25 14:04    [W:0.122 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site